Thanks for the info, now we are getting somewhere I just have unchecked
the "validate server certificate" area for now. Now I am getting a
rejection. Any ideas?
thanks again for the help,
Dan
rad_recv: Access-Request packet from host 128.174.124.2:1024, id=0,
length=224
User-Name = "dbdavids"
NAS-IP-Address = 128.174.124.2
Called-Station-Id = "000f66e4c41c"
Calling-Station-Id = "009096b43336"
NAS-Identifier = "000f66e4c41c"
NAS-Port = 49
Framed-MTU = 1400
State = 0x05d6753b0d1d6b5e153b275d9693ef57
NAS-Port-Type = Wireless-802.11
EAP-Message =
0x0206005a1900170301004f8c8a20407e2068158e8d78c30ec38160e43b0f78ff2b701605b5c79b9de8900c48fb91b49db5bf9dcddd5ccabb4790c6ae46fc07f331bd23bbc88023d68b2e78a4ab7763627926a560ed58927beae5
Message-Authenticator = 0xa25e2734559e8d05f9cb602baa181907
Processing the authorize section of radiusd.conf
modcall: entering group authorize for request 6
modcall[authorize]: module "preprocess" returns ok for request 6
modcall[authorize]: module "chap" returns noop for request 6
modcall[authorize]: module "mschap" returns noop for request 6
rlm_realm: No '@' in User-Name = "dbdavids", looking up realm NULL
rlm_realm: No such realm "NULL"
modcall[authorize]: module "suffix" returns noop for request 6
rlm_eap: EAP packet type response id 6 length 90
rlm_eap: No EAP Start, assuming it's an on-going EAP conversation
modcall[authorize]: module "eap" returns updated for request 6
users: Matched DEFAULT at 152
modcall[authorize]: module "files" returns ok for request 6
modcall: group authorize returns updated for request 6
rad_check_password: Found Auth-Type EAP
auth: type "EAP"
Processing the authenticate section of radiusd.conf
modcall: entering group authenticate for request 6
rlm_eap: Request found, released from the list
rlm_eap: EAP/peap
rlm_eap: processing type peap
rlm_eap_peap: Authenticate
rlm_eap_tls: processing TLS
eaptls_verify returned 7
rlm_eap_tls: Done initial handshake
eaptls_process returned 7
rlm_eap_peap: EAPTLS_OK
rlm_eap_peap: Session established. Decoding tunneled attributes.
rlm_eap_peap: EAP type mschapv2
rlm_eap_peap: Tunneled data is valid.
PEAP: Got tunneled EAP-Message
EAP-Message =
0x020600431a0206003e3164e5402640d5988f1d47d58297a06a950000000000000000c2571a9c92f4970284a462469ceac06779f68025392ddf8f006462646176696473
PEAP: Setting User-Name to dbdavids
PEAP: Adding old state with c7 00
PEAP: Sending tunneled request
EAP-Message =
0x020600431a0206003e3164e5402640d5988f1d47d58297a06a950000000000000000c2571a9c92f4970284a462469ceac06779f68025392ddf8f006462646176696473
FreeRADIUS-Proxied-To = 127.0.0.1
User-Name = "dbdavids"
State = 0xc7001f0cb231ff08af3c8015aa53f2fd
Processing the authorize section of radiusd.conf
modcall: entering group authorize for request 6
modcall[authorize]: module "preprocess" returns ok for request 6
modcall[authorize]: module "chap" returns noop for request 6
modcall[authorize]: module "mschap" returns noop for request 6
rlm_realm: No '@' in User-Name = "dbdavids", looking up realm NULL
rlm_realm: No such realm "NULL"
modcall[authorize]: module "suffix" returns noop for request 6
rlm_eap: EAP packet type response id 6 length 67
rlm_eap: No EAP Start, assuming it's an on-going EAP conversation
modcall[authorize]: module "eap" returns updated for request 6
users: Matched DEFAULT at 152
modcall[authorize]: module "files" returns ok for request 6
modcall: group authorize returns updated for request 6
rad_check_password: Found Auth-Type EAP
auth: type "EAP"
Processing the authenticate section of radiusd.conf
modcall: entering group authenticate for request 6
rlm_eap: Request found, released from the list
rlm_eap: EAP/mschapv2
rlm_eap: processing type mschapv2
Processing the authenticate section of radiusd.conf
modcall: entering group Auth-Type for request 6
rlm_mschap: No User-Password configured. Cannot create LM-Password.
rlm_mschap: No User-Password configured. Cannot create NT-Password.
rlm_mschap: Told to do MS-CHAPv2 for dbdavids with NT-Password
rlm_mschap: FAILED: No NT/LM-Password. Cannot perform authentication.
rlm_mschap: FAILED: MS-CHAP2-Response is incorrect
modcall[authenticate]: module "mschap" returns reject for request 6
modcall: group Auth-Type returns reject for request 6
rlm_eap: Freeing handler
modcall[authenticate]: module "eap" returns reject for request 6
modcall: group authenticate returns reject for request 6
auth: Failed to validate the user.
PEAP: Got tunneled reply RADIUS code 3
MS-CHAP-Error = "\006E=691 R=1"
EAP-Message = 0x04060004
Message-Authenticator = 0x00000000000000000000000000000000
PEAP: Processing from tunneled session code 0x552ade3c50 3
MS-CHAP-Error = "\006E=691 R=1"
EAP-Message = 0x04060004
Message-Authenticator = 0x00000000000000000000000000000000
PEAP: Tunneled authentication was rejected.
rlm_eap_peap: FAILURE
modcall[authenticate]: module "eap" returns handled for request 6
modcall: group authenticate returns handled for request 6
Sending Access-Challenge of id 0 to 128.174.124.2:1024
EAP-Message =
0x010700261900170301001bc55af798c74c5246a8dd9fbdf476919b67f1164944c40efb4e0157
Message-Authenticator = 0x00000000000000000000000000000000
State = 0x4f1ff1edabbfd25da3b5f61c435e22e9
Finished request 6
Going to the next request
Waking up in 6 seconds...
rad_recv: Access-Request packet from host 128.174.124.2:1024, id=0,
length=172
User-Name = "dbdavids"
NAS-IP-Address = 128.174.124.2
Called-Station-Id = "000f66e4c41c"
Calling-Station-Id = "009096b43336"
NAS-Identifier = "000f66e4c41c"
NAS-Port = 49
Framed-MTU = 1400
State = 0x4f1ff1edabbfd25da3b5f61c435e22e9
NAS-Port-Type = Wireless-802.11
EAP-Message =
0x020700261900170301001b9cc071a16300a6bcff7166448f69e519e18d2897a8cb72fbe80068
Message-Authenticator = 0x6197ed50ab7f67ce44a486a0f09e7306
Processing the authorize section of radiusd.conf
modcall: entering group authorize for request 7
modcall[authorize]: module "preprocess" returns ok for request 7
modcall[authorize]: module "chap" returns noop for request 7
modcall[authorize]: module "mschap" returns noop for request 7
rlm_realm: No '@' in User-Name = "dbdavids", looking up realm NULL
rlm_realm: No such realm "NULL"
modcall[authorize]: module "suffix" returns noop for request 7
rlm_eap: EAP packet type response id 7 length 38
rlm_eap: No EAP Start, assuming it's an on-going EAP conversation
modcall[authorize]: module "eap" returns updated for request 7
users: Matched DEFAULT at 152
modcall[authorize]: module "files" returns ok for request 7
modcall: group authorize returns updated for request 7
rad_check_password: Found Auth-Type EAP
auth: type "EAP"
Processing the authenticate section of radiusd.conf
modcall: entering group authenticate for request 7
rlm_eap: Request found, released from the list
rlm_eap: EAP/peap
rlm_eap: processing type peap
rlm_eap_peap: Authenticate
rlm_eap_tls: processing TLS
eaptls_verify returned 7
rlm_eap_tls: Done initial handshake
eaptls_process returned 7
rlm_eap_peap: EAPTLS_OK
rlm_eap_peap: Session established. Decoding tunneled attributes.
rlm_eap_peap: Received EAP-TLV response.
rlm_eap_peap: Tunneled data is valid.
rlm_eap_peap: Had sent TLV failure, rejecting.
rlm_eap: Handler failed in EAP/peap
rlm_eap: Failed in EAP select
modcall[authenticate]: module "eap" returns invalid for request 7
modcall: group authenticate returns invalid for request 7
auth: Failed to validate the user.
Delaying request 7 for 1 seconds
Finished request 7
Going to the next request
Waking up in 6 seconds...
--- Walking the entire request list ---
Sending Access-Reject of id 0 to 128.174.124.2:1024
EAP-Message = 0x04070004
Message-Authenticator = 0x00000000000000000000000000000000
Cleaning up request 7 ID 0 with timestamp 418bbcb5
Nothing to do. Sleeping until we see a request.
-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
