Hi.
# Cisco sends it's VSA attributes with the attribute
# name *again* in the string, like:
#
# H323-Attribute = "h323-attribute=value".
#
# If this configuration item is set to 'yes', then
# the redundant data in the the attribute text is stripped
# out. The result is:
#
# H323-Attribute = "value"
#
# If you're not running a Cisco NAS, you don't need
# this hack.
with_cisco_vsa_hack = yesThe key word is "*again*". In this case attribute name is the same as inside quotes. In your case attribute names are not the same at the left and at the right sides. So with_cisco_vsa_hack seems useless for PIX accounting.
BTW - does mysql permit ":" in column names ?
Billington, David wrote:
Hi! I am running FreeRADIUS 1.0.1 and MySQL 4.1.7 on Redhat 9. The FreeRADIUS software was installed from an RPM package, which I created using the *.spec file included with the source code. Both Authentication and Accounting are working properly, with the one exception. One NAS, a Cisco PIX 525, is sending accounting packets containing multiple Cisco-AVPair attributes, as shown below:
Mon Nov 1 13:42:52 2004 Acct-Status-Type = Start NAS-Port = 208 NAS-IP-Address = 10.100.255.17 Login-IP-Host = 10.100.7.29 Login-TCP-Port = Telnet Acct-Session-Id = "0x0020b1f6" User-Name = "msahni" Cisco-AVPair = "ip:source-ip=10.100.255.98" Cisco-AVPair = "ip:source-port=2557" Cisco-AVPair = "ip:destination-ip=10.100.7.29" Cisco-AVPair = "ip:destination-port=23" Client-IP-Address = 10.100.255.17 Acct-Unique-Session-Id = "f189a9c186f55e4b" Timestamp = 1099338172
I wish to have the Cisco-AVPairs parsed into more 'normal' attributes, such as:
ip:source-ip=10.100.255.98 ip:source-port=2557 ip:destination-ip=10.100.7.29 ip:destination-port=23
which I can then insert into my radacct table using sql.conf. To accomplish this, I've performed two specific actions: (1) I've set the "with_cisco_vsa_hack" option in the preprocess module to "yes" in the radiusd.conf file, and (2) I've added four attributes matching these names in the dictionary.cisco file, as shown below:
ATTRIBUTE ip:source-ip 114 string Cisco ATTRIBUTE ip:source-port 115 string Cisco ATTRIBUTE ip:destination-ip 116 string Cisco ATTRIBUTE ip:destination-port 117 string Cisco
This does not work, however. The detail log file does not show any additional attributes being created. In order to obtain any information from these attributes, I must reference them as "Cisco-AVPair" in my sql.conf file. This causes the information from the first attribute, ip:source-ip to be repeatedly entered into radacct as "ip:source-ip=3D10.100.255.98" (Note also the addition of the '3D' text!). I've tried referencing these attributes as "Cisco-AVPair[0]", "Cisco-AVPair[1]", etc... but this doesn't return anything.
When running 'radiusd -X', the preprocess module returns "noop", which I think means that it doesn't think it needs to do anything? The entire debug info is shown below, and the radiusd.conf file is included in a second email (this one was too big).
I've read the mailing list and everything else until I'm blue in the face, and I see where a lot of people seem to have the same or similar problem, but nowhere have I found a solution that works on my system.
Please help... I'm desperate to get this working! Thanks!!
radiusd -X debug:
Starting - reading configuration files ...
reread_config: reading radiusd.conf
Config: including file: /etc/raddb/proxy.conf
Config: including file: /etc/raddb/clients.conf
Config: including file: /etc/raddb/snmp.conf
Config: including file: /etc/raddb/eap.conf
Config: including file: /etc/raddb/sql.conf
main: prefix = "/usr"
main: localstatedir = "/var"
main: logdir = "/var/log/radius"
main: libdir = "/usr/lib"
main: radacctdir = "/var/log/radius/radacct"
main: hostname_lookups = no
main: max_request_time = 30
main: cleanup_delay = 5
main: max_requests = 1024
main: delete_blocked_requests = 0
main: port = 0
main: allow_core_dumps = no
main: log_stripped_names = no
main: log_file = "/var/log/radius/radius.log"
main: log_auth = no
main: log_auth_badpass = no
main: log_auth_goodpass = no
main: pidfile = "/var/run/radiusd/radiusd.pid"
main: user = "radiusd"
main: group = "radiusd"
main: usercollide = no
main: lower_user = "no"
main: lower_pass = "no"
main: nospace_user = "no"
main: nospace_pass = "no"
main: checkrad = "/usr/sbin/checkrad"
main: proxy_requests = yes
proxy: retry_delay = 5
proxy: retry_count = 3
proxy: synchronous = no
proxy: default_fallback = yes
proxy: dead_time = 120
proxy: post_proxy_authorize = yes
proxy: wake_all_if_all_dead = no
security: max_attributes = 200
security: reject_delay = 1
security: status_server = no
main: debug_level = 0
read_config_files: reading dictionary
read_config_files: reading naslist
Using deprecated naslist file. Support for this will go away soon.
read_config_files: reading clients
read_config_files: reading realms
radiusd: entering modules setup
Module: Library search path is /usr/lib
Module: Loaded exec exec: wait = yes
exec: program = "(null)"
exec: input_pairs = "request"
exec: output_pairs = "(null)"
exec: packet_type = "(null)"
rlm_exec: Wait=yes but no output defined. Did you mean output=none?
Module: Instantiated exec (exec) Module: Loaded expr Module: Instantiated expr (expr) Module: Loaded PAP pap: encryption_scheme = "crypt"
Module: Instantiated pap (pap) Module: Loaded CHAP Module: Instantiated chap (chap) Module: Loaded MS-CHAP mschap: use_mppe = yes
mschap: require_encryption = no
mschap: require_strong = no
mschap: with_ntdomain_hack = no
mschap: passwd = "(null)"
mschap: authtype = "MS-CHAP"
mschap: ntlm_auth = "(null)"
Module: Instantiated mschap (mschap) Module: Loaded preprocess preprocess: huntgroups = "/etc/raddb/huntgroups"
preprocess: hints = "/etc/raddb/hints"
preprocess: with_ascend_hack = no
preprocess: ascend_channels_per_line = 23
preprocess: with_ntdomain_hack = no
preprocess: with_specialix_jetstream_hack = no
preprocess: with_cisco_vsa_hack = yes
Module: Instantiated preprocess (preprocess) Module: Loaded SQL sql: driver = "rlm_sql_mysql"
sql: server = "localhost"
sql: port = ""
sql: login = "radius"
sql: password = "xxxxxxxx"
sql: radius_db = "radius"
sql: acct_table = "radacct"
sql: acct_table2 = "radacct"
sql: authcheck_table = "radcheck"
sql: authreply_table = "radreply"
sql: groupcheck_table = "radgroupcheck"
sql: groupreply_table = "radgroupreply"
sql: usergroup_table = "usergroup"
sql: nas_table = "nas"
sql: dict_table = "dictionary"
sql: sqltrace = no
sql: sqltracefile = "/var/log/radius/sqltrace.sql"
sql: readclients = no
sql: deletestalesessions = yes
sql: num_sql_socks = 5
sql: sql_user_name = "%{User-Name}"
sql: default_user_profile = ""
sql: query_on_not_found = no
sql: authorize_check_query = "SELECT id,UserName,Attribute,Value,op
FROM radcheck WHERE Username = '%{SQL-User-Name}' ORDER BY id"
sql: authorize_reply_query = "SELECT id,UserName,Attribute,Value,op
FROM radreply WHERE Username = '%{SQL-User-Name}' ORDER BY id"
sql: authorize_group_check_query = "SELECT
radgroupcheck.id,radgroupcheck.GroupName,radgroupcheck.Attribute,radgrou
pcheck.Value,radgroupcheck.op FROM radgroupcheck,usergroup WHERE
usergroup.Username = '%{SQL-User-Name}' AND usergroup.GroupName =
radgroupcheck.GroupName ORDER BY radgroupcheck.id"
sql: authorize_group_reply_query = "SELECT
radgroupreply.id,radgroupreply.GroupName,radgroupreply.Attribute,radgrou
preply.Value,radgroupreply.op FROM radgroupreply,usergroup WHERE
usergroup.Username = '%{SQL-User-Name}' AND usergroup.GroupName =
radgroupreply.GroupName ORDER BY radgroupreply.id"
sql: accounting_onoff_query = "UPDATE radacct SET AcctStopTime='%S',
AcctSessionTime=unix_timestamp('%S') - unix_timestamp(AcctStartTime),
AcctTerminateCause='%{Acct-Terminate-Cause}', AcctStopDelay =
'%{Acct-Delay-Time}' WHERE AcctSessionTime=0 AND AcctStopTime=0 AND
NASIPAddress= '%{NAS-IP-Address}' AND AcctStartTime <= '%S'"
sql: accounting_update_query = "UPDATE radacct ? SET FramedIPAddress =
'%{Framed-IP-Address}', ? AcctSessionTime = '%{Acct-Session-Time}', ?
AcctInputOctets = '%{Acct-Input-Octets}', ? AcctOutputOctets =
'%{Acct-Output-Octets}' ? WHERE AcctSessionId = '%{Acct-Session-Id}' ?
AND UserName = '%{SQL-User-Name}' ? AND NASIPAddress=
'%{NAS-IP-Address}'"
sql: accounting_update_query_alt = "INSERT into radacct (AcctSessionId,
AcctUniqueId, UserName, Realm, NASIPAddress, NASPortId, NASPortType,
AcctStartTime, AcctSessionTime, AcctAuthentic, ConnectInfo_start,
AcctInputOctets, AcctOutputOctets, CalledStationId, CallingStationId,
ServiceType, FramedProtocol, FramedIPAddress, AcctStartDelay)
values('%{Acct-Session-Id}', '%{Acct-Unique-Session-Id}',
'%{SQL-User-Name}', '%{Realm}', '%{NAS-IP-Address}', '%{NAS-Port}',
'%{NAS-Port-Type}', DATE_SUB('%S',INTERVAL (%{Acct-Session-Time:-0} +
%{Acct-Delay-Time:-0}) SECOND), '%{Acct-Session-Time}',
'%{Acct-Authentic}', '', '%{Acct-Input-Octets}',
'%{Acct-Output-Octets}', '%{Called-Station-Id}',
'%{Calling-Station-Id}', '%{Service-Type}', '%{Framed-Protocol}',
'%{Framed-IP-Address}', '0')"
sql: accounting_start_query = "INSERT into radacct (AcctSessionId,
AcctUniqueId, UserName, Realm, NASIPAddress, NASPortId, NASPortType,
AcctStartTime, AcctStopTime, AcctSessionTime, AcctAuthentic,
ConnectInfo_start, ConnectInfo_stop, AcctInputOctets, AcctOutputOctets,
CalledStationId, CallingStationId, AcctTerminateCause, ServiceType,
FramedProtocol, FramedIPAddress, AcctStartDelay, AcctStopDelay,
TunnelClientEndpoint, SourceIPAddress, DestinationIPAddress)
values('%{Acct-Session-Id}', '%{Acct-Unique-Session-Id}',
'%{SQL-User-Name}', '%{Realm}', '%{NAS-IP-Address}', '%{NAS-Port}',
'%{NAS-Port-Type}', '%S', '0', '0', '%{Acct-Authentic}',
'%{Connect-Info}', '', '0', '0', '%{Called-Station-Id}',
'%{Calling-Station-Id}', '', '%{Service-Type}', '%{Framed-Protocol}',
'%{Framed-IP-Address}', '%{Acct-Delay-Time}', '0',
'%{Tunnel-Client-Endpoint}', '%{Cisco-AVPair}', '%{Cisco-AVPair}')"
sql: accounting_start_query_alt = "UPDATE radacct SET AcctStartTime =
'%S', AcctStartDelay = '%{Acct-Delay-Time}', ConnectInfo_start =
'%{Connect-Info}' WHERE AcctSessionId = '%{Acct-Session-Id}' AND
UserName = '%{SQL-User-Name}' AND NASIPAddress = '%{NAS-IP-Address}'"
sql: accounting_stop_query = "UPDATE radacct SET AcctStopTime = '%S',
AcctSessionTime = '%{Acct-Session-Time}', AcctInputOctets =
'%{Acct-Input-Octets}', AcctOutputOctets = '%{Acct-Output-Octets}',
AcctTerminateCause = '%{Acct-Terminate-Cause}', AcctStopDelay =
'%{Acct-Delay-Time}', ConnectInfo_stop = '%{Connect-Info}' WHERE
AcctSessionId = '%{Acct-Session-Id}' AND UserName = '%{SQL-User-Name}'
AND NASIPAddress = '%{NAS-IP-Address}'"
sql: accounting_stop_query_alt = "INSERT into radacct (AcctSessionId,
AcctUniqueId, UserName, Realm, NASIPAddress, NASPortId, NASPortType,
AcctStartTime, AcctStopTime, AcctSessionTime, AcctAuthentic,
ConnectInfo_start, ConnectInfo_stop, AcctInputOctets, AcctOutputOctets,
CalledStationId, CallingStationId, AcctTerminateCause, ServiceType,
FramedProtocol, FramedIPAddress, AcctStartDelay, AcctStopDelay)
values('%{Acct-Session-Id}', '%{Acct-Unique-Session-Id}',
'%{SQL-User-Name}', '%{Realm}', '%{NAS-IP-Address}', '%{NAS-Port}',
'%{NAS-Port-Type}', DATE_SUB('%S', INTERVAL (%{Acct-Session-Time:-0} +
%{Acct-Delay-Time:-0}) SECOND), '%S', '%{Acct-Session-Time}',
'%{Acct-Authentic}', '', '%{Connect-Info}', '%{Acct-Input-Octets}',
'%{Acct-Output-Octets}', '%{Called-Station-Id}',
'%{Calling-Station-Id}', '%{Acct-Terminate-Cause}', '%{Service-Type}',
'%{Framed-Protocol}', '%{Framed-IP-Address}', '0',
'%{Acct-Delay-Time}')"
sql: group_membership_query = "SELECT GroupName FROM usergroup WHERE
UserName='%{SQL-User-Name}'"
sql: connect_failure_retry_delay = 60
sql: simul_count_query = ""
sql: simul_verify_query = "SELECT RadAcctId, AcctSessionId, UserName,
NASIPAddress, NASPortId, FramedIPAddress, CallingStationId,
FramedProtocol FROM radacct WHERE UserName='%{SQL-User-Name}' AND
AcctStopTime = 0"
sql: postauth_table = "radpostauth"
sql: postauth_query = "INSERT into radpostauth (id, user, pass, reply,
date) values ('', '%{User-Name}', '%{User-Password:-Chap-Password}',
'%{reply:Packet-Type}', NOW())"
sql: safe-characters =
"@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_: /"
rlm_sql (sql): Driver rlm_sql_mysql (module rlm_sql_mysql) loaded and
linked
rlm_sql (sql): Attempting to connect to [EMAIL PROTECTED]:/radius
rlm_sql (sql): starting 0
rlm_sql (sql): Attempting to connect rlm_sql_mysql #0
rlm_sql_mysql: Starting connect to MySQL server for #0
rlm_sql (sql): Connected new DB handle, #0
rlm_sql (sql): starting 1
rlm_sql (sql): Attempting to connect rlm_sql_mysql #1
rlm_sql_mysql: Starting connect to MySQL server for #1
rlm_sql (sql): Connected new DB handle, #1
rlm_sql (sql): starting 2
rlm_sql (sql): Attempting to connect rlm_sql_mysql #2
rlm_sql_mysql: Starting connect to MySQL server for #2
rlm_sql (sql): Connected new DB handle, #2
rlm_sql (sql): starting 3
rlm_sql (sql): Attempting to connect rlm_sql_mysql #3
rlm_sql_mysql: Starting connect to MySQL server for #3
rlm_sql (sql): Connected new DB handle, #3
rlm_sql (sql): starting 4
rlm_sql (sql): Attempting to connect rlm_sql_mysql #4
rlm_sql_mysql: Starting connect to MySQL server for #4
rlm_sql (sql): Connected new DB handle, #4
Module: Instantiated sql (sql) Module: Loaded Acct-Unique-Session-Id acct_unique: key = "User-Name, Acct-Session-Id, NAS-IP-Address,
Client-IP-Address, NAS-Port"
Module: Instantiated acct_unique (acct_unique) Module: Loaded detail detail: detailfile =
"/var/log/radius/radacct/%{Client-IP-Address}/detail-%Y%m%d"
detail: detailperm = 384
detail: dirperm = 493
detail: locking = no
Module: Instantiated detail (detail) Module: Loaded System unix: cache = no
unix: passwd = "(null)"
unix: shadow = "/etc/shadow"
unix: group = "(null)"
unix: radwtmp = "/var/log/radius/radwtmp"
unix: usegroup = no
unix: cache_reload = 600
Module: Instantiated unix (unix) Module: Loaded radutmp radutmp: filename = "/var/log/radius/radutmp"
radutmp: username = "%{User-Name}"
radutmp: case_sensitive = yes
radutmp: check_with_nas = yes
radutmp: perm = 384
radutmp: callerid = yes
Module: Instantiated radutmp (radutmp) Module: Loaded eap eap: default_eap_type = "md5"
eap: timer_expire = 60
eap: ignore_unknown_eap_types = no
eap: cisco_accounting_username_bug = no
rlm_eap: Loaded and initialized type md5
rlm_eap: Loaded and initialized type leap
gtc: challenge = "Password: "
gtc: auth_type = "PAP"
rlm_eap: Loaded and initialized type gtc
mschapv2: with_ntdomain_hack = no
rlm_eap: Loaded and initialized type mschapv2
Module: Instantiated eap (eap) Listening on authentication *:1812
Listening on accounting *:1813
Listening on proxy *:1814
Ready to process requests.
rad_recv: Accounting-Request packet from host 10.100.255.17:1813,
id=229, length=194
Acct-Status-Type = Start
NAS-Port = 0
NAS-IP-Address = 10.100.255.17
Login-IP-Host = 10.100.248.2
Login-TCP-Port = 5962
Acct-Session-Id = "0x002339ee"
User-Name = ""
Cisco-AVPair = "ip:source-ip=10.100.248.2"
Cisco-AVPair = "ip:source-port=4385"
Cisco-AVPair = "ip:destination-ip=10.100.255.2"
Cisco-AVPair = "ip:destination-port=5962"
Processing the preacct section of radiusd.conf
modcall: entering group preacct for request 3
modcall[preacct]: module "preprocess" returns noop for request 3
rlm_acct_unique: Hashing 'NAS-Port = 0,Client-IP-Address =
10.100.255.17,NAS-IP-Address = 10.100.255.17,Acct-Session-Id =
"0x002339ee",User-Name = ""'
rlm_acct_unique: Acct-Unique-Session-ID = "80142e378dd3cad0".
modcall[preacct]: module "acct_unique" returns ok for request 3
modcall: group preacct returns ok for request 3
Processing the accounting section of radiusd.conf
modcall: entering group accounting for request 3
radius_xlat: '/var/log/radius/radacct/10.100.255.17/detail-20041104'
rlm_detail: /var/log/radius/radacct/%{Client-IP-Address}/detail-%Y%m%d
expands to /var/log/radius/radacct/10.100.255.17/detail-20041104
modcall[accounting]: module "detail" returns ok for request 3
modcall[accounting]: module "unix" returns ok for request 3
radius_xlat: '/var/log/radius/radutmp'
radius_xlat: ''
modcall[accounting]: module "radutmp" returns ok for request 3
radius_xlat: ''
radius_xlat: 'INSERT into radacct (AcctSessionId, AcctUniqueId,
UserName, Realm, NASIPAddress, NASPortId, NASPortType, AcctStartTime,
AcctStopTime, AcctSessionTime, AcctAuthentic, ConnectInfo_start,
ConnectInfo_stop, AcctInputOctets, AcctOutputOctets, CalledStationId,
CallingStationId, AcctTerminateCause, ServiceType, FramedProtocol,
FramedIPAddress, AcctStartDelay, AcctStopDelay, TunnelClientEndpoint,
SourceIPAddress, DestinationIPAddress) values('0x002339ee',
'80142e378dd3cad0', '', '', '10.100.255.17', '0', '', '2004-11-04
13:01:16', '0', '0', '', '', '', '0', '0', '', '', '', '', '', '', '',
'0', '', 'ip:source-ip=3D10.100.248.2', 'ip:source-ip=3D10.100.248.2')'
rlm_sql (sql): Reserving sql socket id: 1
rlm_sql (sql): Released sql socket id: 1
modcall[accounting]: module "sql" returns ok for request 3
modcall: group accounting returns ok for request 3
Sending Accounting-Response of id 229 to 10.100.255.17:1813
Finished request 3
Going to the next request
--- Walking the entire request list ---
Cleaning up request 3 ID 229 with timestamp 418a7c7c
Waking up in 1 seconds...
--- Walking the entire request list ---
Cleaning up request 2 ID 58 with timestamp 418a7c77
Nothing to do. Sleeping until we see a request.
- List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
-- Sincerely Yours, Alexander Serkin, Skylink, Moscow, ph. +7(095)7952089 fa. +7(095)7952084
- List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
