Have you removed the preprocess module from the authorize section? If
so, you won't get the Client-IP-Address attribute. 0.5 is such an old
release that I wouldn't be surprised if that behavior changed as part of
the move to a modularized server a while back.
--Mike
On Wed, 2004-12-01 at 23:13, Peter Shin wrote:
> Hi,
>
> Recently we upgraded FreeRADIUS from 0.5 to 1.0.1 which seems to be
> working fine.
>
> However, I've encountered that the detail module cannot determine the
> client ip address hence the detail files are not written under
> Client-IP-Address. Version 0.5 used to get the client ip address and all
> detail files were written under it.
>
> The debug message shows as follow;
>
> rad_recv: Accounting-Request packet from host 203.108.77.238:32874,
> id=0, length=162
> User-Name = "rejectmepls"
> NAS-IP-Address = 0.0.0.0
> NAS-Port = 0
> Acct-Status-Type = Start
> Acct-Session-Id = "dontTryMacth"
> Proxy-State =
> 0x50583031000039cc000000000000000000000000000000000002000000000000000000
> 00000000000000000000020715cba6624700000000000000000000000300000003000086
> 850009be40342868eb33bf811c4f798446f6
> Acct-Delay-Time = 1437982
> modcall: entering group accounting
> radius_xlat: '/usr/local/var/log/radius/radacct//detail-2004120215'
> rlm_detail:
> /usr/local/var/log/radius/radacct/%{Client-IP-Address}/detail-%D%H
> expands to /usr/local/var/log/radius/radacct//detail-2004120215
> modcall[accounting]: module "detail" returns ok
> radius_xlat: 'rejectmepls'
> ...
>
> Has anyone experienced the same problem?
>
> Any comments or suggestion would be appreciated.
>
> Regards,
>
> Peter
>
> -
> List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
