> > >> Hi all,
> > >>
> > >> I am sure I saw somebody ask this recently, but I cannot find it.
How
> > >> can I setup radius to accept all requests from a particular NAS,
> > based
> > >> on the NAS ip address?
> > >>
> > >
> > >DEFAULT NAS-IP-Address == 127.0.0.1, Auth-Type := Accept
> > >
> > >change 127.0.0.1 to the nas you want or add that nas to huntgroups
and
> > >change nas-ip-address to hungroup-name.
> >
> > I want to simply have one NAS's requests be authenticated, so do I
put
> > this information in the radreply table?
> >
> > e.g.
> > insert INTO radreply (id, username, attribute, op, value) values
> > ('1','10.1.0.9','Auth-Type',':=','Accept');
> >
> > ???
> >
>
> The easiest way is to just add it to your users file, as I had shown
> above. Just put this on the top of your users file, replacing x.x.x.x
> with the IP of the NAS you want to accept.
>
> DEFAULT NAS-IP-Address == x.x.x.x, Auth-Type := Accept
>
>
I get this in the debug output:
auth: No authenticate method (Auth-Type) configuration found for the
request: Rejecting the user
auth: Failed to validate the user.
How do I make radius use the users file?
Thanks.
-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
