I have gotten a user to only respond if connected from one nas. Putting in the auth-type:= reject didn't work. Removing it all together worked... this is what I have ..
If I put in multiple client ip's it doesn't work at all. Is their something special to have it use multiple client ip's? Is their a way to define "IN the user profile" not the huntgroup list. I can add "one" Client-IP-Address attribute to the Rad Group Check table and it does what I want. Is their and attribute something like Huntgroup = hunt1,hunt2 pork1 Client-IP-Address == 208.243.100.5, Password == test Thanx -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Alan DeKok Sent: Wednesday, February 02, 2005 6:57 PM To: [email protected] Subject: Re: Huntgroup "GROUP"? "Cris Boisvert" <[EMAIL PROTECTED]> wrote: > I have this in the users file > > pork1 Client-IP-Address != 208.243.100.5, Auth-Type := reject, Password == > "test" > > When I test from that nas I get a reject every time. See what debugging mode says. > Ideas? Try putting the password in a different entry of the "users" file. Alan DeKok. - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html -- No virus found in this incoming message. Checked by AVG Anti-Virus. Version: 7.0.300 / Virus Database: 265.8.3 - Release Date: 1/31/2005 - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
