Sorry, this forgot. (part of eapol file)
[2968] 10:06:54:585: ElProcessEapSuccess: Authentication successful
[2968] 10:06:54:585: FSMAuthenticated entered for port ORiNOCO PC Card (5 volt)
[2968] 10:06:54:585: ElEapEnd entered
[2968] 10:06:54:585: Setting state AUTHENTICATED for port ORiNOCO PC Card (5
volt)
[2968] 10:06:54:585: FSMAuthenticated: fIsRemoteEndEAPOLAware=<1>,
dwWaitForKeys=<1>
[2968] 10:06:54:585: TIMER: Restart PCB Time: 5
[2968] 10:06:54:585: FSMAuthenticated completed for port ORiNOCO PC Card (5
volt)
[2968] 10:06:54:585: WZCNetmanConnectionStatusChanged: Entered
[2968] 10:06:54:585: QueueEvent: CoCreateInstance succeeded
[2968] 10:06:54:585: ConnectionStatusChanged completed
[2968] 10:06:54:585: ProcessReceivedPacket: Reposting buffer on port
{A935AF87-1131-4B97-A1C5-7EFE7BCD763B}
[2968] 10:06:54:585: ElReadFromPort entered
[2968] 10:06:54:585: ElReadFromPort: pPCB = 000CF348, RefCnt = 3
[2968] 10:06:54:585: ProcessReceivedPacket: pPCB= 000CF348, RefCnt = 3
[2968] 10:06:54:585: ProcessReceivedPacket exit
[700] 10:06:59:612: ElTimeoutCallbackRoutine entered
[700] 10:06:59:612: EAPOL-Key for transmit key *NOT* received within 5 seconds
in AUTHENTICATED state
[700] 10:06:59:612: EAPOL Failure: Fail Count = 3
[700] 10:06:59:612: ElVerifyEAPOLKeyReceived: Calling ElZeroConfigNotify:
failcount=3, prevauthtype=1, type=(3)
[700] 10:06:59:612: ElVerifyEAPOLKeyReceived: RpcCmdInterface[12] SUCCEEDed
[700] 10:06:59:612: ElZeroConfigNotify: Handle=(4), failcount=(3),
lastauthtype=(1)
[700] 10:06:59:702: ElVerifyEAPOLKeyReceived: ElZeroConfigNotify SUCCEEDed --
type=(3)
[700] 10:06:59:702: ElVerifyEAPOLKeyReceived: Pushing into disconnected state:
Fail count (3) > Max fail count (3)
[700] 10:06:59:722: FSMDisconnected entered for port ORiNOCO PC Card (5 volt)
[700] 10:06:59:722: Setting state DISCONNECTED for port ORiNOCO PC Card (5
volt)
Quoting ealatalo <[EMAIL PROTECTED]>:
> Hi.
>
> I'm configured successful eap-tls authentication with freeradius. Then I
> tryed
> eap-Peap but that AP didn't work with peap protocol. Now I have new access
> point and same configurations in freeradius server, xp(sp2) supplicantand
> and
> new AP.
>
> Now I have problem. Authentication succesful until couple seconds
> disconnecting
> and same again. In freeradius debug, Access-accept message is send and
> MS-MPPE
> keys too. This is happening both, eap and peap. In client eapol file, I
> found
> following text which could be a problem.
>
> Thanks if somebody can answer and sorry my poor english.
>
> T.ea
>
>
> -
> List info/subscribe/unsubscribe? See
> http://www.freeradius.org/list/users.html
>
-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
