I am using FreeRadius 1.0.2 with mySql on a Fedora Core3 machine. I am using
the default encryption method.
I have setup FreeRadius to successfully connect to mySql. I can successfully
enter new users in through the dialup_admin web page, but when I "Check
Password" the response I get, is "NO It is wrong." When I do the radtest the
server responds back to the client with:
Sending Access-Request of id 125 to 192.168.1.104:1812
User-Name = "test"
User-Password = "test"
NAS-IP-Address = localhost.localdomain
NAS-Port = 1812
rad_recv: Access-Reject packet from host 192.168.1.104:1812, id=125,
length=20
On the server side:
rad_recv: Access-Request packet from host 192.168.1.104:32769, id=187,
length=56
User-Name = "test"
User-Password = "test"
NAS-IP-Address = 255.255.255.255
NAS-Port = 1812
Processing the authorize section of radiusd.conf
modcall: entering group authorize for request 1
modcall[authorize]: module "preprocess" returns ok for request 1
modcall[authorize]: module "chap" returns noop for request 1
modcall[authorize]: module "mschap" returns noop for request 1
rlm_realm: No '@' in User-Name = "test", looking up realm NULL
rlm_realm: No such realm "NULL"
modcall[authorize]: module "suffix" returns noop for request 1
radius_xlat: 'test'
rlm_sql (sql): sql_set_user escaped user --> 'test'
radius_xlat: 'SELECT id,UserName,Attribute,Value,op FROM radcheck WHERE
Username = 'test' ORDER BY id' rlm_sql (sql): Reserving sql socket id: 3
radius_xlat: 'SELECT
radgroupcheck.id,radgroupcheck.GroupName,radgroupcheck.Attribute,radgroupche
ck.Value,radgroupcheck.op FROM radgroupcheck,usergroup WHERE
usergroup.Username = 'test' AND usergroup.GroupName =
radgroupcheck.GroupName ORDER BY radgroupcheck.id'
radius_xlat: 'SELECT id,UserName,Attribute,Value,op FROM radreply WHERE
Username = 'test' ORDER BY id'
radius_xlat: 'SELECT
radgroupreply.id,radgroupreply.GroupName,radgroupreply.Attribute,radgrouprep
ly.Value,radgroupreply.op FROM radgroupreply,usergroup WHERE
usergroup.Username = 'test' AND usergroup.GroupName =
radgroupreply.GroupName ORDER BY radgroupreply.id' rlm_sql (sql): Released
sql socket id: 3
modcall[authorize]: module "sql" returns ok for request 1
modcall: group authorize returns ok for request 1
auth: type Local
auth: user supplied User-Password does NOT match local User-Password
auth: Failed to validate the user.
Login incorrect: [test/test] (from client localhost port 1812) Delaying
request 1 for 1 seconds Finished request 1 Going to the next request
--- Walking the entire request list ---
Waking up in 1 seconds...
--- Walking the entire request list ---
Waking up in 1 seconds...
--- Walking the entire request list ---
Sending Access-Reject of id 187 to 192.168.1.104:32769
Waking up in 4 seconds...
--- Walking the entire request list ---
Cleaning up request 1 ID 187 with timestamp 421a8970
Nothing to do. Sleeping until we see a request.
I am not sure but I believe the problem is in this area:
modcall: entering group authorize for request 1
modcall[authorize]: module "preprocess" returns ok for request 1
modcall[authorize]: module "chap" returns noop for request 1
modcall[authorize]: module "mschap" returns noop for request 1
If so, how can I fix the problem?
I realize there must be an encryption setting that is wrong, so any help
with is greatly appreciated.
James Ecker
MCSE + Internet, CNE, A+, Network+
-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
