Another working Example below:
joe_user Auth-Type := eap, User-Password == "RFC3580"
Reply-Message = "Hello, %u",
Tunnel-type = 13,
Tunnel-Medium-Type = 802,
Tunnel-Private-Group-ID = 2
> -------- Original Message --------
> Subject: Re: HP 2524 won't use the VLAN-ID, why ???
> From: Mark Wasmer <[EMAIL PROTECTED]>
> Date: Fri, April 01, 2005 4:29 am
> To: [email protected]
>
> <mark <at> baeckerei-wasmer.de> writes:
>
>
> > --snip--users-File--
> > #"testuser" Service-Type == Framed-User
> > # Tunnel-Media = IEEE-802,a
> > # Tunnel-Private-Group-Id = 5,
> > # Tunnel-Type = VLAN
> >
> > "testuser" Service-Type == Framed-User
> > Tunnel-Type += 13,
> > Tunnel-Media += 6,
> > Tunnel-Private-Group-Id += 5,
> >
>
> Whops, simply used the wrong syntax in the users-File, this works now :
>
> "testuser"
> Tunnel-Type:0 = VLAN,
> Tunnel-Medium-Type:0 = IEEE-802,
> Tunnel-Private-Group-Id:0 = 5
>
>
>
> -
> List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
