thank you kostas,
but i have another problem if there is 1 network of public ip,
ippool public {
range-start = 223.xxx.xxx.xxx
range-stop = 223.xxx.xxx.xxx
netmask = 255.255.255.0
cache-size = 62
session-db = ${raddbdir}/db.ippublic
ip-index = ${raddbdir}/db.ippublic_idx
}
and i want to separate my public users and my private users,
if i use DEFAULT value for Pool-Name it will be including public ip.
is there a way that just give pool1 and pool2 to my private users ?
regards
eDoS
----- Original Message -----
From: "Kostas Kalevras" <[EMAIL PROTECTED]>
To: <[email protected]>
Sent: Monday, April 04, 2005 6:32 PM
Subject: Re: Give 2 ip pools to the clients
> On Fri, 1 Apr 2005, eDoS wrote:
>
> > Hi,
> >
> > i get alocation 2 network of ip,
> > the range is :
> > 192.168.2.1 - 192.168.2.14
> > 192.168.5.1 - 192.168.5.14
> >
> > my conf :
> > ippool pool1 {
> > range-start = 192.168.2.1
> > range-stop = 192.168.2.14
> > netmask = 255.255.255.0
> > cache-size = 14
> > session-db = ${raddbdir}/db.ippool1
> > ip-index = ${raddbdir}/db.ipindex1
> > }
> >
> > ippool pool2 {
> > range-start = 192.168.5.1
> > range-stop = 192.168.5.14
> > netmask = 255.255.255.0
> > cache-size = 14
> > session-db = ${raddbdir}/db.ippool2
> > ip-index = ${raddbdir}/db.ipindex2
> > }
> >
> > i want to give all ip alocation to all of clients.
> > i have use just 1 network of ip but sometimes my clients couldn't get
any more ip.
> > is there any way to give 2 attribute pool-name (pool1 & pool2) ?
>
> You can set Pool-Name to DEFAULT to match all ippool modules.
>
> >
> > best regards,
> >
> > eDoS
>
> --
> Kostas Kalevras Network Operations Center
> [EMAIL PROTECTED] National Technical University of Athens, Greece
> Work Phone: +30 210 7721861
> 'Go back to the shadow' Gandalf
>
> -
> List info/subscribe/unsubscribe? See
http://www.freeradius.org/list/users.html
-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
