Sorry Alan this is my first major dive into FreeRadius if I am a little
annoying please forgive me just trying to learn,
Here is what i got from the debug mode on cli:
[EMAIL PROTECTED] mcooper]# radtest mcooper 123abc localhost:1645 1645 testpw
Sending Access-Request of id 113 to 127.0.0.1:1645
User-Name = "mcooper"
User-Password = "123abc"
NAS-IP-Address = server1.bccisp.net
NAS-Port = 1645
rad_recv: Access-Reject packet from host 127.0.0.1:1645, id=113, length=20
[EMAIL PROTECTED] mcooper]#
And here is what I see in the logs:
Mon Jun 27 13:10:38 2005 : Info: Using deprecated naslist file. Support for
this will go away soon.
Mon Jun 27 13:10:38 2005 : Info: rlm_exec: Wait=yes but no output defined.
Did you mean output=none?
Mon Jun 27 13:10:38 2005 : Error: ERROR: Cannot find a configuration entry
for module "sql".
Mon Jun 27 13:10:45 2005 : Info: Using deprecated naslist file. Support for
this will go away soon.
Mon Jun 27 13:10:45 2005 : Info: rlm_exec: Wait=yes but no output defined.
Did you mean output=none?
Mon Jun 27 13:10:45 2005 : Error: ERROR: Cannot find a configuration entry
for module "sql".
Mon Jun 27 13:11:09 2005 : Info: Using deprecated naslist file. Support for
this will go away soon.
Mon Jun 27 13:11:09 2005 : Info: rlm_exec: Wait=yes but no output defined.
Did you mean output=none?
Mon Jun 27 13:11:09 2005 : Error: ERROR: Cannot find a configuration entry
for module "sql".
Mon Jun 27 13:11:23 2005 : Info: Using deprecated naslist file. Support for
this will go away soon.
Mon Jun 27 13:11:23 2005 : Info: rlm_exec: Wait=yes but no output defined.
Did you mean output=none?
Mon Jun 27 13:11:23 2005 : Info: Ready to process requests.
Mon Jun 27 13:13:35 2005 : Info: Using deprecated naslist file. Support for
this will go away soon.
Mon Jun 27 13:13:35 2005 : Info: rlm_exec: Wait=yes but no output defined.
Did you mean output=none?
Mon Jun 27 13:13:35 2005 : Info: Ready to process requests.
wow this is Greek to me, I will be looking for Faqs on this subject as well
todya if I find the result I will post it.
Thanks in advance,
Michael A Cooper
BCCISP.net
http://www.bccisp.net
281-854-2079
"Technology that counts, voices that matter!"
----- Original Message -----
From: "Michael Cooper" <[EMAIL PROTECTED]>
To: "FreeRadius users mailing list" <[email protected]>
Sent: Monday, June 27, 2005 1:58 PM
Subject: Re: Access-Reject
Sorry about the previous SUBJECT line.
I am using both cli and dialup-admin and I am getting the same result
reject messgaes on every attempt.
Please read previous post
Thanks in advance,
Michael A Cooper
BCCISP.net
http://www.bccisp.net
281-854-2079
"Technology that counts, voices that matter!"
----- Original Message -----
From: "Michael Cooper" <[EMAIL PROTECTED]>
To: "FreeRadius users mailing list"
<[email protected]>
Sent: Monday, June 27, 2005 1:47 PM
Subject: Re: traffic based accounting info
Okay guys,
I finally figured out how to get FreeRadius in stalled and I have
Dialup admin also installed however I keep getting reject messages like
this one:
Going to the next request
--- Walking the entire request list ---
Waking up in 1 seconds...
--- Walking the entire request list ---
Waking up in 1 seconds...
--- Walking the entire request list ---
Sending Access-Reject of id 41 to 127.0.0.1:33534
Waking up in 4 seconds...
--- Walking the entire request list ---
Cleaning up request 4 ID 41 with timestamp 42c048b6
Nothing to do. Sleeping until we see a request.
Now I am not sure where to fix this at or even where to look for it I
think the config files are all in /etc/raddb clients.conf, users,
radiusd.conf,
I do belive it is trying to use a radius db via MySql however i haven't
got a luce if it's working properly, Please help
This n00b is drowning,
Michael A Cooper
BCCISP.net
http://www.bccisp.net
281-854-2079
"Technology that counts, voices that matter!"
----- Original Message -----
From: "Alan DeKok" <[EMAIL PROTECTED]>
To: <[EMAIL PROTECTED]>; "FreeRadius users mailing
list" <[email protected]>
Sent: Monday, June 27, 2005 11:59 AM
Subject: Re: traffic based accounting info
Antonio Mancuso <[EMAIL PROTECTED]> wrote:
I'll modify the kernel in order to add more statistics on the ppp
interface
(like #bytes per protocol or similar) and when the radius.so plugin
ask the kernel for ppp statistics it will have all the needed
information.
At this time I think it can pass all the info to radius for accounting.
does this idea sound correct to you?
it can be of interest of other people on this list?
Sure. Make it more general, though. e.g. bytes by destination port,
not just bytes for POP & SMTP.
Alan DeKok.
-
List info/subscribe/unsubscribe? See
http://www.freeradius.org/list/users.html
--
No virus found in this incoming message.
Checked by AVG Anti-Virus.
Version: 7.0.323 / Virus Database: 267.8.2/29 - Release Date: 6/27/2005
- List info/subscribe/unsubscribe? See
http://www.freeradius.org/list/users.html
--
No virus found in this incoming message.
Checked by AVG Anti-Virus.
Version: 7.0.323 / Virus Database: 267.8.2/29 - Release Date: 6/27/2005
- List info/subscribe/unsubscribe? See
http://www.freeradius.org/list/users.html
--
No virus found in this incoming message.
Checked by AVG Anti-Virus.
Version: 7.0.323 / Virus Database: 267.8.2/29 - Release Date: 6/27/2005
-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
