or simply put 'eap' as the last module in the authorize section. should
be the same.
Jefri bin Dahari wrote:
It works. Thank you very much Vladimir.
----- Original Message ----- From: "Vladimir Vuksan" <[EMAIL PROTECTED]>
To: "FreeRadius users mailing list" <[email protected]>
Sent: Friday, July 08, 2005 14:39
Subject: Re: Can do EAP/TLS, but not EAP/MD5
Jefri bin Dahari wrote:
I have Freeradius running where wireless users authenticate using
EAP/TLS. Now, I would like to use the same server to authenticate
wired users using EAP/MD5 on Cisco switch 3750 but it doesn't work.
The log shows it doesn't do EAP authentication as shown below.
Attached is my eap.conf.
You appear to be setting Auth-Type to Local. Check your Users file and
see where the Auth-Type := Local or similar is getting set. Comment it
out.
Vladimir
-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
