On Tue, 9 Aug 2005, kevin wrote:
> What? So, should I change the ldap attribute values with "+=" ???
> Any other way?
>
Yep, it works.
I did a test, with this DN only one filter-id was returned.
dn: uid=dustytest,ou=users,ou=radius,dc=test,dc=com
objectClass: radiusprofile
userPassword:: ZHVzdHl0ZXN0
radiusGroupName: dial
radiusGroupName: adsl
uid: dustytest
radiusFilterId: filter1
radiusFilterId: filter2
Received response ID 210, code 2, length = 59
Framed-Routing = None
Framed-IP-Netmask = 255.255.255.0
Framed-Protocol = PPP
Service-Type = Framed-User
Filter-Id = "filter1"
With this dn, both were returned (note there were no quotes in it - that
didn't work)
dn: uid=dustytest,ou=users,ou=radius,dc=test,dc=com
objectClass: radiusprofile
userPassword:: ZHVzdHl0ZXN0
radiusGroupName: dial
radiusGroupName: adsl
uid: dustytest
radiusFilterId: += filter1
radiusFilterId: += filter2
Received response ID 214, code 2, length = 68
Framed-Routing = None
Framed-IP-Netmask = 255.255.255.0
Framed-Protocol = PPP
Service-Type = Framed-User
Filter-Id = "filter1"
Filter-Id = "filter2"
-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
