> Ben Thompson wrote: > > > The trouble is I need to assign different VLAN's to users depending > > which access point they connect from. What I would like to know is if it > > is possible to use Huntgroups to look up the VLAN id based on something > > like the IP address of the access point? > > You could test the variable "Client-IP-Address" in the users file. > > testuser Client-IP-Address == 10.0.0.1, Password := "azerty" > Tunnel-Private-Group-ID:1 := 1, > Fall-Through = Yes > > testuser Client-IP-Address == 10.0.0.2, Password := "azerty" > Tunnel-Private-Group-ID:1 := 2, > Fall-Through = Yes > > -- > Nicolas Baradakis
Hi Thanks for that advice. I can see that I could end up with a very large users file using this method. Is there any limit on the size of the users file? In the near future we may have something like 800000 entries in there. Is this where you would normally look to use a database backend? Thanks Ben - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html