hi
i don't want to tell nonsense, but as far as I know, LEAP is not a pure
EAP type. the AP has thus to support it. and the WRT54 does not.
do not blame the WRT, blame LEAP and its design. and it has nothing to
do with 802.1X - standard 802.1X protocols should work with WRT54.
ciao
artur
Thierry wrote:
Hi,
I got a freeradius configured to handle LEAP authentication.
it works with a Cisco AP Cisco Airnet 1100:
client 10.0.0.1 {
secret = secret
shortname = apcisco
nastype = cisco
}
But it fail for linksys WRT54GS:
client 192.168.1.1
{
secret = secret
shortname = linksys
nastype = cisco
}
I tried different nastype :
With other or nastype commented, nothing happen after identity frames.
With cisco nastype, LEAP didn't finish, AP does not send the last
frame to respond to supplicant challenge.
Is there a specific nastype for Linksys ot this AP is bugged ?
I tried with another RADIUS (SBR/Windows) with the same comportment.
Do you know other AP than cisco ones that permit 802.1X successfully
with freeradius ?
Cordialement,
-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
