Did you debug the call setup in your AS5350? Usually Phone companies sends
as DNIS only the last four digits. I mean, this is most probabily not a NAS
or RADIUS issue, it is most probabily an issue with the provider of your PRI
line and/or phone number.
Also, by default Ciscos send Called-Station-Id as the DNIS number sent from
the PRI, so if you didn't configure some kind of translation, it's probabily
mapping DNIS as sent by the PRI provider.
Ing. Paolo Rotela
Jefe Técnico
Blue Telecom
----- Original Message -----
From: "Madhvi Gokool" <[EMAIL PROTECTED]>
To: <[email protected]>
Sent: Tuesday, October 11, 2005 4:37 AM
Subject: freeradius - Called-Station-Id, reporting
Hello
We are currently using freeradius to authenticate dialup users. We are
investigating several wasy of improving the service offered to the dialup
users and have encountered several issues: -
1. The Called-Station-Id is a 4-digit number in the detail log file.
While testing authentication based on the Called Telephone number, the
Called-Station-Id had to be specified as "1300" instead of "2131300" in
the users file .
If we have two PRI lines , say 3120101 and 2130101, the Called-Station-Id
will be seen as "0101" in both cases. So we'll not be able to
differentiate between the two numbers. Is there a way to configure
freeradius or Cisco5350 RAS to use a 7-digit number as Called-Station-Id.
The Calling -Station-Id however is a 7-digit number.
2. I have also tested the Login-Time, Max-Daily-Session and
Max-Monthly-Session attributes. If the user is dialing outside the
timeframe set in the users file or has exceeded his daily/monthly quota,
he will not get connected. Excerpt of radius log file below : -
Thu Oct 6 15:26:18 2005 : Auth: Invalid user (rlm_counter: Maximum daily
usage
time reached): [steve/<CHAP-Password>] (from client as port 255 cli
2117039)
As administrator we'll know why the user got disconnected .
For the user side now, how can we inform the user that
i) he has exceeded his quota and that he should replenish his account.
or
ii) he's dialing outside the timeframe he paid for.
iii) he's got xxx seconds of connection time left
Are there any scripts that will interact with freeradius and send these
users an email or sms?
3. Does dialup admin work with plain text users file ?
Thanx in advance for your help.
Regds
Madhvi
- List info/subscribe/unsubscribe? See
http://www.freeradius.org/list/users.html
-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
