When i try to connect i have something like this:
rad_recv: Access-Request packet from host 192.168.0.20:1206, id=43,
length=126
User-Name = "debik"
NAS-IP-Address = 192.168.0.20
NAS-Port = 0
Called-Station-Id = "00-0D-88-F2-69-0E"
Calling-Station-Id = "00-0F-CB-B0-06-86"
NAS-Identifier = "dlink"
Framed-MTU = 1380
NAS-Port-Type = Wireless-802.11
EAP-Message = 0x0201000a01646562696b
Message-Authenticator = 0xf5b2e3caa43cb0ff7c3bd6d54d15be73
Processing the authorize section of radiusd.conf
modcall: entering group authorize for request 0
modcall[authorize]: module "preprocess" returns ok for request 0
modcall[authorize]: module "chap" returns noop for request 0
modcall[authorize]: module "mschap" returns noop for request 0
rlm_realm: No '@' in User-Name = "debik", looking up realm NULL
rlm_realm: No such realm "NULL"
modcall[authorize]: module "suffix" returns noop for request 0
rlm_eap: EAP packet type response id 1 length 10
rlm_eap: No EAP Start, assuming it's an on-going EAP conversation
modcall[authorize]: module "eap" returns updated for request 0
users: Matched debik at 1
modcall[authorize]: module "files" returns ok for request 0
modcall: group authorize returns updated for request 0
rad_check_password: Found Auth-Type EAP
auth: type "EAP"
Processing the authenticate section of radiusd.conf
modcall: entering group authenticate for request 0
rlm_eap: EAP Identity
rlm_eap: processing type tls
rlm_eap_tls: Initiate
rlm_eap_tls: Start returned 1
modcall[authenticate]: module "eap" returns handled for request 0
modcall: group authenticate returns handled for request 0
Sending Access-Challenge of id 48 to 192.168.0.20:1206
EAP-Message = 0x010200061920
Message-Authenticator = 0x00000000000000000000000000000000
State = 0xd409266b7b84fd964331bed3eeaa28e7
Finished request 0
Going to the next request
--- Walking the entire request list ---
Waking up in 6 seconds...
rad_recv: Access-Request packet from host 192.168.0.20:1206, id=49,
length=214
User-Name = "debik"
NAS-IP-Address = 192.168.0.20
NAS-Port = 0
Called-Station-Id = "00-0D-88-F2-69-0E"
Calling-Station-Id = "00-0F-CB-B0-06-86"
NAS-Identifier = "dlink"
Framed-MTU = 1380
NAS-Port-Type = Wireless-802.11
EAP-Message =
0x0202005019800000004616030100410100003d030143958782e70aee5659c0bfe7eb0584cec3c2aba075e8a56625bc53f97bea5c3400001600040005000a0009006400
62000300060013001200630100
State = 0xd409266b7b84fd964331bed3eeaa28e7
Message-Authenticator = 0x9a3362a24be687fbdafad2133f24ea4e
Processing the authorize section of radiusd.conf
modcall: entering group authorize for request 1
modcall[authorize]: module "preprocess" returns ok for request 1
modcall[authorize]: module "chap" returns noop for request 1
modcall[authorize]: module "mschap" returns noop for request 1
rlm_realm: No '@' in User-Name = "debik", looking up realm NULL
rlm_realm: No such realm "NULL"
modcall[authorize]: module "suffix" returns noop for request 1
rlm_eap: EAP packet type response id 2 length 80
rlm_eap: No EAP Start, assuming it's an on-going EAP conversation
modcall[authorize]: module "eap" returns updated for request 1
users: Matched debik at 1
modcall[authorize]: module "files" returns ok for request 1
modcall: group authorize returns updated for request 1
rad_check_password: Found Auth-Type EAP
auth: type "EAP"
Processing the authenticate section of radiusd.conf
modcall: entering group authenticate for request 1
rlm_eap: Request found, released from the list
rlm_eap: EAP/peap
rlm_eap: processing type peap
rlm_eap_peap: Authenticate
rlm_eap_tls: processing TLS
rlm_eap_tls: Length Included
eaptls_verify returned 11
(other): before/accept initialization
TLS_accept: before/accept initialization
rlm_eap_tls: <<< TLS 1.0 Handshake [length 0041], ClientHello
TLS_accept: SSLv3 read client hello A
rlm_eap_tls: >>> TLS 1.0 Handshake [length 004a], ServerHello
TLS_accept: SSLv3 write server hello A
rlm_eap_tls: >>> TLS 1.0 Handshake [length 0589], Certificate
TLS_accept: SSLv3 write certificate A
rlm_eap_tls: >>> TLS 1.0 Handshake [length 0004], ServerHelloDone
TLS_accept: SSLv3 write server done A
TLS_accept: SSLv3 flush data
TLS_accept:error in SSLv3 read client certificate A
In SSL Handshake Phase
In SSL Accept mode
eaptls_process returned 13
rlm_eap_peap: EAPTLS_HANDLED
modcall[authenticate]: module "eap" returns handled for request 1
modcall: group authenticate returns handled for request 1
Sending Access-Challenge of id 49 to 192.168.0.20:1206
EAP-Message =
0x0103040a19c0000005e6160301004a02000046030143958528b6f0e8b16fbb2f8683d68f408394292ac7e827a85fc26fcbff876995208e832c8ad766b0b6d131231d61
d7c64bfa5b8fedc936807e160a24dbb3064c3100040016030105890b00058500058200025c30820258308201c1020900c59f08c38d6114ab300d06092a864886f70d01010405003068310b30090603
5504061302504c311530130603550408130c646f6c6e6f736c61736b6965311330110603550407130a50726f63686f776963653111300f060355040a1308646562696b6e6574311a301806092a8648
86f70d010901160b646562696b4076702e706c301e170d3035313230
EAP-Message =
0x353134303031305a170d3135313230333134303031305a3079310b300906035504061302504c311530130603550408130c646f6c6e6f736c61736b6965311330110603
550407130a50726f63686f776963653111300f060355040a1308646562696b6e6574310f300d06035504031306526164697573311a301806092a864886f70d010901160b646562696b4076702e706c
30819f300d06092a864886f70d010101050003818d0030818902818100ad2ccaf9101658a275609bf273302ad9cc21bab195cb383e347778554223d111b1c3b8b86f40a9d9b64ac4316df79dfe7013
bb7091855f4bfc27d2f40eb73f87c6288925728f67c34abc07baff7f
EAP-Message =
0x22188b4b15baee9f924ecc124130fbdad9df9e91134ec1c1b191501edc3043001162fe9c2db36c4df2311b8be44ff48a95cd0203010001300d06092a864886f70d0101
04050003818100170e4dd30a49556585d3d291f663e4ef67f98c95312118180cceec62837a6d32bdcb6c74125071fecbdc7943a0740f925beac9f15312b6c0306a7ec093d5331a1f790571423aca1f
6b79f22feb4c077366ddded369f9de70a4a3c3037f43a44adccf8836c3c4dc477b2d519f2cb411d8c965529cbf853fe41bf096fed77c309b0003203082031c30820285a00302010202090085b8227a
5105b072300d06092a864886f70d01010405003068310b3009060355
EAP-Message =
0x04061302504c311530130603550408130c646f6c6e6f736c61736b6965311330110603550407130a50726f63686f776963653111300f060355040a1308646562696b6e
6574311a301806092a864886f70d010901160b646562696b4076702e706c301e170d3035313230353133353832365a170d3135313230333133353832365a3068310b300906035504061302504c3115
30130603550408130c646f6c6e6f736c61736b6965311330110603550407130a50726f63686f776963653111300f060355040a1308646562696b6e6574311a301806092a864886f70d010901160b64
6562696b4076702e706c30819f300d06092a864886f70d0101010500
EAP-Message = 0x03818d0030818902818100e38abc83ea7d012624fa56
Message-Authenticator = 0x00000000000000000000000000000000
State = 0x12a04df1d25bc567048572358616fcd5
Finished request 1
Going to the next request
Waking up in 6 seconds...
rad_recv: Access-Request packet from host 192.168.0.20:1206, id=50,
length=140
User-Name = "debik"
User-Name = "debik"
NAS-IP-Address = 192.168.0.20
NAS-Port = 0
Called-Station-Id = "00-0D-88-F2-69-0E"
Calling-Station-Id = "00-0F-CB-B0-06-86"
NAS-Identifier = "dlink"
Framed-MTU = 1380
NAS-Port-Type = Wireless-802.11
EAP-Message = 0x020300061900
State = 0x12a04df1d25bc567048572358616fcd5
Message-Authenticator = 0x235f8e4035fb9dae121b4d90e4af7f00
Processing the authorize section of radiusd.conf
modcall: entering group authorize for request 2
modcall[authorize]: module "preprocess" returns ok for request 2
modcall[authorize]: module "chap" returns noop for request 2
modcall[authorize]: module "mschap" returns noop for request 2
rlm_realm: No '@' in User-Name = "debik", looking up realm NULL
rlm_realm: No such realm "NULL"
modcall[authorize]: module "suffix" returns noop for request 2
rlm_eap: EAP packet type response id 3 length 6
rlm_eap: No EAP Start, assuming it's an on-going EAP conversation
modcall[authorize]: module "eap" returns updated for request 2
users: Matched debik at 1
modcall[authorize]: module "files" returns ok for request 2
modcall: group authorize returns updated for request 2
rad_check_password: Found Auth-Type EAP
auth: type "EAP"
Processing the authenticate section of radiusd.conf
modcall: entering group authenticate for request 2
rlm_eap: Request found, released from the list
rlm_eap: EAP/peap
rlm_eap: processing type peap
rlm_eap_peap: Authenticate
rlm_eap_tls: processing TLS
rlm_eap_tls: Received EAP-TLS ACK message
rlm_eap_tls: ack handshake fragment handler
eaptls_verify returned 1
eaptls_process returned 13
rlm_eap_peap: EAPTLS_HANDLED
modcall[authenticate]: module "eap" returns handled for request 2
modcall: group authenticate returns handled for request 2
Sending Access-Challenge of id 50 to 192.168.0.20:1206
EAP-Message =
0x010401ec1900a217587efb570cd3ad86c9451a2be31057de20c5ad878f5f9d58602c6b5b6d214e3c95acd92bf69a81245d7b1fa23166837166423f6bb78178e3e3293d
eb7dc818e27da8aa78ab1926fce97cb179b7dcd5396dfc57e5369bcb295aab2fa3ca9e46350815545fb00809c6e11bb052907951d486484f0203010001a381cd3081ca301d0603551d0e04160414fb
0932b35698efe3daab492c7864a9fb679850d930819a0603551d2304819230818f8014fb0932b35698efe3daab492c7864a9fb679850d9a16ca46a3068310b300906035504061302504c3115301306
03550408130c646f6c6e6f736c61736b696531133011060355040713
EAP-Message =
0x0a50726f63686f776963653111300f060355040a1308646562696b6e6574311a301806092a864886f70d010901160b646562696b4076702e706c82090085b8227a5105
b072300c0603551d13040530030101ff300d06092a864886f70d0101040500038181003e39e5a843ee73c4d83cf96c051e0b41648b388e9aefb50622b05bb100e089c157dde4497246b15857839aac
30ccb7483aec2fa2b571e372b374b7b16a660b9be2c5190ba106fb0dce346f46e0cd44b815bdad2ad834699c72a4625015e7ba591452dec105ef0bb7492fb2d4a7e0ea85c8bae823ada82d77635e13
a144405a8416030100040e000000
Message-Authenticator = 0x00000000000000000000000000000000
State = 0xd64aaa565bb9852f6f3a2b54484b28dc
Finished request 2
Going to the next request
--- Walking the entire request list ---
Cleaning up request 0 ID 48 with timestamp 43958528
Cleaning up request 1 ID 49 with timestamp 43958528
Waking up in 6 seconds...
rad_recv: Access-Request packet from host 192.168.0.20:1206, id=51,
length=326
User-Name = "debik"
NAS-IP-Address = 192.168.0.20
NAS-Port = 0
Called-Station-Id = "00-0D-88-F2-69-0E"
Calling-Station-Id = "00-0F-CB-B0-06-86"
NAS-Identifier = "dlink"
Framed-MTU = 1380
NAS-Port-Type = Wireless-802.11
EAP-Message =
0x020400c01980000000b6160301008610000082008014b0b7a4bc9c45391d798b40293b3fee2381910cdb4f9af290c83b643f98645e2ef3d4226bc21923a77a5c418fe4
c748c44a7188f6eda2b3cece213d12e32ac93f4f9ecfc5a604fc758d918114e99eff6a985febbcb33c81c85f18cb85ccafd787fb77c263e56bfa5f6cc1c34e000ffffbe8d8c7e4cf8542f4c16b7f31
f2ac111403010001011603010020f8a252f5e71e671bbc7330cf10ca9a39a34eb9bc10bace79d0ae59583b648289
State = 0xd64aaa565bb9852f6f3a2b54484b28dc
Message-Authenticator = 0x64ea60b0db912489a53276326ade6844
Processing the authorize section of radiusd.conf
modcall: entering group authorize for request 3
modcall[authorize]: module "preprocess" returns ok for request 3
modcall[authorize]: module "chap" returns noop for request 3
modcall[authorize]: module "mschap" returns noop for request 3
rlm_realm: No '@' in User-Name = "debik", looking up realm NULL
rlm_realm: No such realm "NULL"
modcall[authorize]: module "suffix" returns noop for request 3
rlm_eap: EAP packet type response id 4 length 192
rlm_eap: No EAP Start, assuming it's an on-going EAP conversation
modcall[authorize]: module "eap" returns updated for request 3
users: Matched debik at 1
modcall[authorize]: module "files" returns ok for request 3
modcall: group authorize returns updated for request 3
rad_check_password: Found Auth-Type EAP
auth: type "EAP"
Processing the authenticate section of radiusd.conf
modcall: entering group authenticate for request 3
rlm_eap: Request found, released from the list
rlm_eap: EAP/peap
rlm_eap: processing type peap
rlm_eap_peap: Authenticate
rlm_eap_tls: processing TLS
rlm_eap_tls: Length Included
eaptls_verify returned 11
rlm_eap_tls: <<< TLS 1.0 Handshake [length 0086], ClientKeyExchange
TLS_accept: SSLv3 read client key exchange A
rlm_eap_tls: <<< TLS 1.0 ChangeCipherSpec [length 0001]
rlm_eap_tls: <<< TLS 1.0 Handshake [length 0010], Finished
TLS_accept: SSLv3 read finished A
rlm_eap_tls: >>> TLS 1.0 ChangeCipherSpec [length 0001]
TLS_accept: SSLv3 write change cipher spec A
rlm_eap_tls: >>> TLS 1.0 Handshake [length 0010], Finished
TLS_accept: SSLv3 write finished A
TLS_accept: SSLv3 flush data
(other): SSL negotiation finished successfully
SSL Connection Established
eaptls_process returned 13
rlm_eap_peap: EAPTLS_HANDLED
modcall[authenticate]: module "eap" returns handled for request 3
modcall: group authenticate returns handled for request 3
Sending Access-Challenge of id 51 to 192.168.0.20:1206
EAP-Message =
0x01050031190014030100010116030100208eb9a4b1373a0af658bee7efec4987165d4c8196370248598649a9fc3b7f2e44
Message-Authenticator = 0x00000000000000000000000000000000
State = 0xc49efeda851d78556950d82633fb46c5
Finished request 3
Going to the next request
--- Walking the entire request list ---
Cleaning up request 2 ID 50 with timestamp 43958534
Waking up in 6 seconds...
rad_recv: Access-Request packet from host 192.168.0.20:1206, id=52,
length=140
User-Name = "debik"
NAS-IP-Address = 192.168.0.20
NAS-Port = 0
Called-Station-Id = "00-0D-88-F2-69-0E"
Calling-Station-Id = "00-0F-CB-B0-06-86"
NAS-Identifier = "dlink"
Framed-MTU = 1380
NAS-Port-Type = Wireless-802.11
EAP-Message = 0x020500061900
State = 0xc49efeda851d78556950d82633fb46c5
Message-Authenticator = 0x9e4324d1bf70f18fb05af290cb00713a
Processing the authorize section of radiusd.conf
modcall: entering group authorize for request 4
modcall[authorize]: module "preprocess" returns ok for request 4
modcall[authorize]: module "chap" returns noop for request 4
modcall[authorize]: module "mschap" returns noop for request 4
rlm_realm: No '@' in User-Name = "debik", looking up realm NULL
rlm_realm: No such realm "NULL"
modcall[authorize]: module "suffix" returns noop for request 4
rlm_eap: EAP packet type response id 5 length 6
rlm_eap: No EAP Start, assuming it's an on-going EAP conversation
modcall[authorize]: module "eap" returns updated for request 4
users: Matched debik at 1
modcall[authorize]: module "files" returns ok for request 4
modcall: group authorize returns updated for request 4
rad_check_password: Found Auth-Type EAP
auth: type "EAP"
Processing the authenticate section of radiusd.conf
modcall: entering group authenticate for request 4
rlm_eap: Request found, released from the list
rlm_eap: EAP/peap
rlm_eap: processing type peap
rlm_eap_peap: Authenticate
rlm_eap_tls: processing TLS
rlm_eap_tls: Received EAP-TLS ACK message
rlm_eap_tls: ack handshake is finished
eaptls_verify returned 3
eaptls_process returned 3
rlm_eap_peap: EAPTLS_SUCCESS
modcall[authenticate]: module "eap" returns handled for request 4
modcall: group authenticate returns handled for request 4
Sending Access-Challenge of id 52 to 192.168.0.20:1206
EAP-Message =
0x0106002019001703010015c9d61d5c36917ecdb8e18d14cd08a39ff1f674f6c2
Message-Authenticator = 0x00000000000000000000000000000000
State = 0x4534e9f630888261fb6fe1c94fbf6b4e
Finished request 4
Going to the next request
--- Walking the entire request list ---
Cleaning up request 3 ID 51 with timestamp 43958542
Waking up in 6 seconds...
rad_recv: Access-Request packet from host 192.168.0.20:1206, id=53,
length=167
User-Name = "debik"
NAS-IP-Address = 192.168.0.20
NAS-Port = 0
Called-Station-Id = "00-0D-88-F2-69-0E"
Calling-Station-Id = "00-0F-CB-B0-06-86"
NAS-Identifier = "dlink"
Framed-MTU = 1380
NAS-Port-Type = Wireless-802.11
EAP-Message =
0x0206002119001703010016184d73dc80cba0f7d497edb0c2623e4810732c2faba2
State = 0x4534e9f630888261fb6fe1c94fbf6b4e
Message-Authenticator = 0xa681c5144dfee7628207f0919726e044
Processing the authorize section of radiusd.conf
modcall: entering group authorize for request 5
modcall[authorize]: module "preprocess" returns ok for request 5
modcall[authorize]: module "chap" returns noop for request 5
modcall[authorize]: module "mschap" returns noop for request 5
rlm_realm: No '@' in User-Name = "debik", looking up realm NULL
rlm_realm: No such realm "NULL"
modcall[authorize]: module "suffix" returns noop for request 5
rlm_eap: EAP packet type response id 6 length 33
rlm_eap: No EAP Start, assuming it's an on-going EAP conversation
modcall[authorize]: module "eap" returns updated for request 5
users: Matched debik at 1
modcall[authorize]: module "files" returns ok for request 5
modcall: group authorize returns updated for request 5
rad_check_password: Found Auth-Type EAP
auth: type "EAP"
Processing the authenticate section of radiusd.conf
modcall: entering group authenticate for request 5
rlm_eap: Request found, released from the list
rlm_eap: EAP/peap
rlm_eap: processing type peap
rlm_eap_peap: Authenticate
rlm_eap_tls: processing TLS
eaptls_verify returned 7
rlm_eap_tls: Done initial handshake
eaptls_process returned 7
rlm_eap_peap: EAPTLS_OK
rlm_eap_peap: Session established. Decoding tunneled attributes.
rlm_eap_peap: Identity - debik
rlm_eap_peap: Tunneled data is valid.
PEAP: Got tunneled EAP-Message
EAP-Message = 0x0206000a01646562696b
PEAP: Got tunneled identity of debik
PEAP: Setting default EAP type for tunneled EAP session.
PEAP: Setting User-Name to debik
PEAP: Sending tunneled request
EAP-Message = 0x0206000a01646562696b
FreeRADIUS-Proxied-To = 127.0.0.1
User-Name = "debik"
Processing the authorize section of radiusd.conf
modcall: entering group authorize for request 5
modcall[authorize]: module "preprocess" returns ok for request 5
modcall[authorize]: module "chap" returns noop for request 5
modcall[authorize]: module "mschap" returns noop for request 5
rlm_realm: No '@' in User-Name = "debik", looking up realm NULL
rlm_realm: No such realm "NULL"
modcall[authorize]: module "suffix" returns noop for request 5
rlm_eap: EAP packet type response id 6 length 10
rlm_eap: No EAP Start, assuming it's an on-going EAP conversation
modcall[authorize]: module "eap" returns updated for request 5
users: Matched debik at 1
modcall[authorize]: module "files" returns ok for request 5
modcall: group authorize returns updated for request 5
rad_check_password: Found Auth-Type EAP
auth: type "EAP"
Processing the authenticate section of radiusd.conf
modcall: entering group authenticate for request 5
rlm_eap: EAP Identity
rlm_eap: processing type mschapv2
rlm_eap_mschapv2: Issuing Challenge
modcall[authenticate]: module "eap" returns handled for request 5
modcall: group authenticate returns handled for request 5
PEAP: Got tunneled reply RADIUS code 11
EAP-Message =
0x0107001f1a0107001a10122e94021a49b9d91abf5d5da281997e646562696b
Message-Authenticator = 0x00000000000000000000000000000000
State = 0xcd4923eddcb6bf6b9817de86fa2b297e
PEAP: Processing from tunneled session code 0x8164490 11
EAP-Message =
0x0107001f1a0107001a10122e94021a49b9d91abf5d5da281997e646562696b
Message-Authenticator = 0x00000000000000000000000000000000
State = 0xcd4923eddcb6bf6b9817de86fa2b297e
PEAP: Got tunneled Access-Challenge
modcall[authenticate]: module "eap" returns handled for request 5
modcall: group authenticate returns handled for request 5
Sending Access-Challenge of id 53 to 192.168.0.20:1206
EAP-Message =
0x010700361900170301002b33df14728848abaf757de4623752468afe9055407f1de5e26969e870a3f18d5af3d413a600636cefc8754c
Message-Authenticator = 0x00000000000000000000000000000000
State = 0xade4e1d7dc126e63b410f3afea66e71c
Finished request 5
Going to the next request
--- Walking the entire request list ---
Waking up in 5 seconds...
rad_recv: Access-Request packet from host 192.168.0.20:1206, id=54,
length=221
User-Name = "debik"
NAS-IP-Address = 192.168.0.20
NAS-Port = 0
Called-Station-Id = "00-0D-88-F2-69-0E"
Calling-Station-Id = "00-0F-CB-B0-06-86"
NAS-Identifier = "dlink"
Framed-MTU = 1380
NAS-Port-Type = Wireless-802.11
EAP-Message =
0x020700571900170301004c2570b32e76e1448dfd467aa52174cfa19a916c9d1d37d3b2a5a398264e042dc9b0e3d7af28b2d9001c6418835ee3ac0d9f7f4cb7936f32cb
b10a2f433de88f39f1078962e5a5e3e091f436a9
State = 0xade4e1d7dc126e63b410f3afea66e71c
Message-Authenticator = 0x8c537236cb4fb0018e7bf1c1906bded3
Processing the authorize section of radiusd.conf
modcall: entering group authorize for request 6
modcall[authorize]: module "preprocess" returns ok for request 6
modcall[authorize]: module "chap" returns noop for request 6
modcall[authorize]: module "mschap" returns noop for request 6
rlm_realm: No '@' in User-Name = "debik", looking up realm NULL
rlm_realm: No such realm "NULL"
modcall[authorize]: module "suffix" returns noop for request 6
rlm_eap: EAP packet type response id 7 length 87
rlm_eap: No EAP Start, assuming it's an on-going EAP conversation
modcall[authorize]: module "eap" returns updated for request 6
users: Matched debik at 1
modcall[authorize]: module "files" returns ok for request 6
modcall: group authorize returns updated for request 6
rad_check_password: Found Auth-Type EAP
auth: type "EAP"
Processing the authenticate section of radiusd.conf
modcall: entering group authenticate for request 6
rlm_eap: Request found, released from the list
rlm_eap: EAP/peap
rlm_eap: processing type peap
rlm_eap_peap: Authenticate
rlm_eap_tls: processing TLS
eaptls_verify returned 7
rlm_eap_tls: Done initial handshake
eaptls_process returned 7
rlm_eap_peap: EAPTLS_OK
rlm_eap_peap: Session established. Decoding tunneled attributes.
rlm_eap_peap: EAP type mschapv2
rlm_eap_peap: Tunneled data is valid.
PEAP: Got tunneled EAP-Message
EAP-Message =
0x020700401a0207003b31ebc8273c78a1ee903bd1d5ec117ac6510000000000000000da0517de9bbbea89b5a02566f8d040e0c7de299c3eb3b89600646562696b
PEAP: Setting User-Name to debik
PEAP: Adding old state with cd 49
PEAP: Sending tunneled request
EAP-Message =
0x020700401a0207003b31ebc8273c78a1ee903bd1d5ec117ac6510000000000000000da0517de9bbbea89b5a02566f8d040e0c7de299c3eb3b89600646562696b
FreeRADIUS-Proxied-To = 127.0.0.1
User-Name = "debik"
State = 0xcd4923eddcb6bf6b9817de86fa2b297e
Processing the authorize section of radiusd.conf
modcall: entering group authorize for request 6
modcall[authorize]: module "preprocess" returns ok for request 6
modcall[authorize]: module "chap" returns noop for request 6
modcall[authorize]: module "mschap" returns noop for request 6
rlm_realm: No '@' in User-Name = "debik", looking up realm NULL
rlm_realm: No such realm "NULL"
modcall[authorize]: module "suffix" returns noop for request 6
rlm_eap: EAP packet type response id 7 length 64
rlm_eap: No EAP Start, assuming it's an on-going EAP conversation
modcall[authorize]: module "eap" returns updated for request 6
users: Matched debik at 1
modcall[authorize]: module "files" returns ok for request 6
modcall: group authorize returns updated for request 6
rad_check_password: Found Auth-Type EAP
auth: type "EAP"
Processing the authenticate section of radiusd.conf
modcall: entering group authenticate for request 6
rlm_eap: Request found, released from the list
rlm_eap: EAP/mschapv2
rlm_eap: processing type mschapv2
Processing the authenticate section of radiusd.conf
modcall: entering group Auth-Type for request 6
rlm_mschap: Told to do MS-CHAPv2 for debik with NT-Password
rlm_mschap: adding MS-CHAPv2 MPPE keys
modcall[authenticate]: module "mschap" returns ok for request 6
modcall: group Auth-Type returns ok for request 6
MSCHAP Success
modcall[authenticate]: module "eap" returns handled for request 6
modcall: group authenticate returns handled for request 6
PEAP: Got tunneled reply RADIUS code 11
MS-CHAP2-Success =
0x07533d45344231323736453530433733414432384138323433363838463143343844353736354146384236
EAP-Message =
0x010800331a0307002e533d45344231323736453530433733414432384138323433363838463143343844353736354146384236
Message-Authenticator = 0x00000000000000000000000000000000
State = 0x2f9b4d86c83410ad597e09d3eafceef2
PEAP: Processing from tunneled session code 0x8185120 11
MS-CHAP2-Success =
0x07533d45344231323736453530433733414432384138323433363838463143343844353736354146384236
EAP-Message =
0x010800331a0307002e533d45344231323736453530433733414432384138323433363838463143343844353736354146384236
Message-Authenticator = 0x00000000000000000000000000000000
State = 0x2f9b4d86c83410ad597e09d3eafceef2
PEAP: Got tunneled Access-Challenge
modcall[authenticate]: module "eap" returns handled for request 6
modcall: group authenticate returns handled for request 6
Sending Access-Challenge of id 54 to 192.168.0.20:1206
EAP-Message =
0x0108004a1900170301003f43f9794f14dad7490df6a0127647429960ca6a93f0a5ec0c612d436d04a1183737e77eb2d8fdbc121abf7ddb4a26ebcc2bf05dc8d367b108
80a4cb4b61c514
Message-Authenticator = 0x00000000000000000000000000000000
State = 0x8544df4e4de2c39dd35ee988e2fb9320
Finished request 6
Going to the next request
--- Walking the entire request list ---
Cleaning up request 4 ID 52 with timestamp 4395854e
Cleaning up request 5 ID 53 with timestamp 4395854f
Waking up in 6 seconds...
rad_recv: Access-Request packet from host 192.168.0.20:1206, id=55,
length=163
User-Name = "debik"
NAS-IP-Address = 192.168.0.20
NAS-Port = 0
Called-Station-Id = "00-0D-88-F2-69-0E"
Calling-Station-Id = "00-0F-CB-B0-06-86"
NAS-Identifier = "dlink"
Framed-MTU = 1380
NAS-Port-Type = Wireless-802.11
EAP-Message =
0x0208001d1900170301001229f578af00b8fc7235c8eaa68fcdbc72feae
State = 0x8544df4e4de2c39dd35ee988e2fb9320
Message-Authenticator = 0x34ad86e3f2b7da07034b5fc3aca6e3d3
Processing the authorize section of radiusd.conf
modcall: entering group authorize for request 7
modcall[authorize]: module "preprocess" returns ok for request 7
modcall[authorize]: module "chap" returns noop for request 7
modcall[authorize]: module "mschap" returns noop for request 7
rlm_realm: No '@' in User-Name = "debik", looking up realm NULL
rlm_realm: No such realm "NULL"
modcall[authorize]: module "suffix" returns noop for request 7
rlm_eap: EAP packet type response id 8 length 29
rlm_eap: No EAP Start, assuming it's an on-going EAP conversation
modcall[authorize]: module "eap" returns updated for request 7
users: Matched debik at 1
modcall[authorize]: module "files" returns ok for request 7
modcall: group authorize returns updated for request 7
rad_check_password: Found Auth-Type EAP
auth: type "EAP"
Processing the authenticate section of radiusd.conf
modcall: entering group authenticate for request 7
rlm_eap: Request found, released from the list
rlm_eap: EAP/peap
rlm_eap: processing type peap
rlm_eap_peap: Authenticate
rlm_eap_tls: processing TLS
eaptls_verify returned 7
rlm_eap_tls: Done initial handshake
eaptls_process returned 7
rlm_eap_peap: EAPTLS_OK
rlm_eap_peap: Session established. Decoding tunneled attributes.
rlm_eap_peap: EAP type mschapv2
rlm_eap_peap: Tunneled data is valid.
PEAP: Got tunneled EAP-Message
EAP-Message = 0x020800061a03
PEAP: Setting User-Name to debik
PEAP: Adding old state with 2f 9b
PEAP: Sending tunneled request
EAP-Message = 0x020800061a03
FreeRADIUS-Proxied-To = 127.0.0.1
User-Name = "debik"
State = 0x2f9b4d86c83410ad597e09d3eafceef2
Processing the authorize section of radiusd.conf
modcall: entering group authorize for request 7
modcall[authorize]: module "preprocess" returns ok for request 7
modcall[authorize]: module "chap" returns noop for request 7
modcall[authorize]: module "mschap" returns noop for request 7
rlm_realm: No '@' in User-Name = "debik", looking up realm NULL
rlm_realm: No such realm "NULL"
modcall[authorize]: module "suffix" returns noop for request 7
rlm_eap: EAP packet type response id 8 length 6
rlm_eap: No EAP Start, assuming it's an on-going EAP conversation
modcall[authorize]: module "eap" returns updated for request 7
users: Matched debik at 1
modcall[authorize]: module "files" returns ok for request 7
modcall: group authorize returns updated for request 7
rad_check_password: Found Auth-Type EAP
auth: type "EAP"
Processing the authenticate section of radiusd.conf
modcall: entering group authenticate for request 7
rlm_eap: Request found, released from the list
rlm_eap: EAP/mschapv2
rlm_eap: processing type mschapv2
rlm_eap: Freeing handler
modcall[authenticate]: module "eap" returns ok for request 7
modcall: group authenticate returns ok for request 7
PEAP: Got tunneled reply RADIUS code 2
EAP-Message = 0x03080004
Message-Authenticator = 0x00000000000000000000000000000000
User-Name = "debik"
PEAP: Processing from tunneled session code 0x8176398 2
EAP-Message = 0x03080004
Message-Authenticator = 0x00000000000000000000000000000000
User-Name = "debik"
PEAP: Tunneled authentication was successful.
rlm_eap_peap: SUCCESS
modcall[authenticate]: module "eap" returns handled for request 7
modcall: group authenticate returns handled for request 7
Sending Access-Challenge of id 55 to 192.168.0.20:1206
EAP-Message =
0x010900261900170301001bdc1040801ce3f38b12fc19dd2138d8d9940b5c8ebc70d74477ee40
Message-Authenticator = 0x00000000000000000000000000000000
State = 0x602378d5819fe5645fdad491ddd742d0
Finished request 7
Going to the next request
--- Walking the entire request list ---
Cleaning up request 6 ID 54 with timestamp 4395855a
Waking up in 6 seconds...
rad_recv: Access-Request packet from host 192.168.0.20:1206, id=56,
length=172
User-Name = "debik"
NAS-IP-Address = 192.168.0.20
NAS-Port = 0
Called-Station-Id = "00-0D-88-F2-69-0E"
Calling-Station-Id = "00-0F-CB-B0-06-86"
NAS-Identifier = "dlink"
Framed-MTU = 1380
NAS-Port-Type = Wireless-802.11
EAP-Message =
0x020900261900170301001b84822106a8b961bb5fb40fc1fc1c6b371d3e6bc860496feeca0474
State = 0x602378d5819fe5645fdad491ddd742d0
Message-Authenticator = 0xc1aab6cc12adf088eb3c1f97aff29cb7
Processing the authorize section of radiusd.conf
modcall: entering group authorize for request 8
modcall[authorize]: module "preprocess" returns ok for request 8
modcall[authorize]: module "chap" returns noop for request 8
modcall[authorize]: module "mschap" returns noop for request 8
rlm_realm: No '@' in User-Name = "debik", looking up realm NULL
rlm_realm: No such realm "NULL"
modcall[authorize]: module "suffix" returns noop for request 8
rlm_eap: EAP packet type response id 9 length 38
rlm_eap: No EAP Start, assuming it's an on-going EAP conversation
modcall[authorize]: module "eap" returns updated for request 8
users: Matched debik at 1
modcall[authorize]: module "files" returns ok for request 8
modcall: group authorize returns updated for request 8
rad_check_password: Found Auth-Type EAP
auth: type "EAP"
Processing the authenticate section of radiusd.conf
modcall: entering group authenticate for request 8
rlm_eap: Request found, released from the list
rlm_eap: EAP/peap
rlm_eap: processing type peap
rlm_eap_peap: Authenticate
rlm_eap_tls: processing TLS
eaptls_verify returned 7
rlm_eap_tls: Done initial handshake
eaptls_process returned 7
rlm_eap_peap: EAPTLS_OK
rlm_eap_peap: Session established. Decoding tunneled attributes.
rlm_eap_peap: Received EAP-TLV response.
rlm_eap_peap: Tunneled data is valid.
rlm_eap_peap: Success
rlm_eap: Freeing handler
modcall[authenticate]: module "eap" returns ok for request 8
modcall: group authenticate returns ok for request 8
Sending Access-Accept of id 56 to 192.168.0.20:1206
MS-MPPE-Recv-Key =
0xb77d91b85373992858a401f5c10221d07cb98ff5a27df64e28d42d1fd90b78ba
MS-MPPE-Send-Key =
0x3225b819a201a32e2d56693c1a3183196b2693be1017cf2c8a3679a9d6ec9c82
EAP-Message = 0x03090004
Message-Authenticator = 0x00000000000000000000000000000000
User-Name = "debik"
Finished request 8
Going to the next request
---------
So as you can se everything seems to be allright .
Am i right ???
----- Original Message -----
From: "Zoltan A. Ori" <[EMAIL PROTECTED]>
To: "FreeRadius users mailing list" <[email protected]>
Sent: Tuesday, December 06, 2005 1:10 PM
Subject: Re: XP auth + PEAP
On Tuesday 06 December 2005 04:10, debik wrote:
The problem is that i connect to the netowrk but i don't se the network.
Ican't not ping any hosts.
And what have you done to troubleshoot your connection?
You must check your network. If the supplicant connects as you say, then
either the network information you've given it is unusable or the NAS is
not
forwarding traffic. Everything will do what you tell it to do. It's basic
network stuff and not for the FreeRADIUS mailing list.
When connected, check your supplicant (Windows XP SP2, this is *not* the
client). Look at the detailed status of the connection. Is the address,
subnet mask, gateway usable on your network?
Check the NAS (*this* is the client, not your Windows PC). Is it in
agreement
that the supplicant is authenticated and ready to forward traffic?
Those are questions to ask yourself and check. We don't need to know the
answers. You do. There is nothing anyone on this list can do to help you
if
all you can give are vague, general statements of your problem.
-
List info/subscribe/unsubscribe? See
http://www.freeradius.org/list/users.html
__________ NOD32 Informacje 1.1312 (20051205) __________
Wiadomosc zostala sprawdzona przez System Antywirusowy NOD32
http://www.nod32.com lub http://www.nod32.pl
-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
