Please, show your USERS file.
Best regards, Serg -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of James Taylor Sent: Thursday, January 12, 2006 2:02 AM To: 'FreeRadius users mailing list' Subject: RE: FreeRadius & Cisco Pix Auth Sorry about that... here is the extended Debugs. rad_recv: Access-Request packet from host 192.168.42.1:1025, id=66, length=94 User-Name = "jtaylor" NAS-IP-Address = 192.168.42.1 User-Password = "*******" NAS-Port = 53 Cisco-AVPair = "ip:source-ip=192.168.43.250" Processing the authorize section of radiusd.conf modcall: entering group authorize for request 0 modcall[authorize]: module "preprocess" returns ok for request 0 modcall[authorize]: module "mschap" returns noop for request 0 rlm_realm: No '@' in User-Name = "jtaylor", looking up realm NULL rlm_realm: No such realm "NULL" modcall[authorize]: module "suffix" returns noop for request 0 rlm_eap: No EAP-Message, not doing EAP modcall[authorize]: module "eap" returns noop for request 0 users: Matched entry DEFAULT at line 214 users: Matched entry DEFAULT at line 217 users: Matched entry DEFAULT at line 220 modcall[authorize]: module "files" returns ok for request 0 rlm_ldap: - authorize rlm_ldap: performing user authorization for jtaylor radius_xlat: '(uid=jtaylor)' radius_xlat: 'ou=People,dc=laszlosystems,dc=com' rlm_ldap: ldap_get_conn: Checking Id: 0 rlm_ldap: ldap_get_conn: Got Id: 0 rlm_ldap: attempting LDAP reconnection rlm_ldap: (re)connect to intranet.corp.laszlosystems.com:389, authentication 0 rlm_ldap: bind as cn=Manager,dc=laszlosystems,dc=com/Laszl0 to intranet.corp.laszlosystems.com:389 rlm_ldap: waiting for bind result ... rlm_ldap: Bind was successful rlm_ldap: performing search in ou=People,dc=laszlosystems,dc=com, with filter (uid=jtaylor) rlm_ldap: Added password ******* in check items rlm_ldap: looking for check items in directory... rlm_ldap: looking for reply items in directory... rlm_ldap: user jtaylor authorized to use remote access rlm_ldap: ldap_release_conn: Release Id: 0 modcall[authorize]: module "ldap" returns ok for request 0 modcall: group authorize returns ok for request 0 rad_check_password: Found Auth-Type System auth: type "System" ERROR: Unknown value specified for Auth-Type. Cannot perform requested action. auth: Failed to validate the user. Delaying request 0 for 1 seconds Finished request 0 Going to the next request --- Walking the entire request list --- Waking up in 1 seconds... --- Walking the entire request list --- Waking up in 1 seconds... --- Walking the entire request list --- Sending Access-Reject of id 66 to 192.168.42.1:1025 -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] org] On Behalf Of Alan DeKok Sent: Wednesday, January 11, 2006 2:00 PM To: FreeRadius users mailing list Subject: Re: FreeRadius & Cisco Pix Auth "James Taylor" <[EMAIL PROTECTED]> wrote: > The following shows a debug of what I am seeing on the Radius Server > during the Auth process. Nope. There's a LOT more information printed if you run as "radiusd -X", as suggested in the FAQ, README, and INSTALL. Alan DeKok. - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
