It gets to the pre-proxy, adds the domain after the user name, but doesn't
strip out the 'DOMAIN\\\\'
Do you see any evidence that the 'ntdomain' is actually doing anything? I
don't see much of anything except the one line 'modcall[authorize]: module
"ntdomain" returns updated for request 0'
Any other ideas Phil / Group?
Thanks,
-Reynold
---CUT---
--- Walking the entire request list ---
Thread 1 got semaphore
Thread 1 handling request 0, (1 handled so far)
Waking up in 5 seconds...
hreads: total/active/spare threads = 5/1/4
User-Name = "adm.suffolk.edu\\rmcguire"
NAS-IP-Address = 172.16.73.1
NAS-Port = 2
Framed-MTU = 1400
Called-Station-Id = "00:04:96:28:fe:08"
Calling-Station-Id = "00:90:96:b0:a4:45"
NAS-Port-Type = Wireless-802.11
NAS-Identifier = "WM1000"
EAP-Message =
0x0200001d0161646d2e737566666f6c6b2e6564755c726d636775697265
Message-Authenticator = 0x5110bd2828db2b4dfc020776f8d17989
Processing the authorize section of radiusd.conf
modcall: entering group authorize for request 0
modcall[authorize]: module "preprocess" returns ok for request 0
modcall[authorize]: module "chap" returns noop for request 0
modcall[authorize]: module "mschap" returns noop for request 0
rlm_realm: No '@' in User-Name = "adm.suffolk.edu\rmcguire", skipping
NULL due to config.
modcall[authorize]: module "suffix" returns noop for request 0
rlm_realm: Looking up realm "adm.suffolk.edu" for User-Name =
"adm.suffolk.edu\rmcguire"
rlm_realm: Found realm "adm.suffolk.edu"
rlm_realm: Proxying request from user rmcguire to realm adm.suffolk.edu
rlm_realm: Adding Realm = "adm.suffolk.edu"
rlm_realm: Preparing to proxy authentication request to realm
"adm.suffolk.edu"
modcall[authorize]: module "ntdomain" returns updated for request 0
rlm_eap: Request is supposed to be proxied to Realm adm.suffolk.edu. Not
doing EAP.
modcall[authorize]: module "eap" returns noop for request 0
users: Matched entry DEFAULT at line 153
modcall[authorize]: module "files" returns ok for request 0
modcall: leaving group authorize (returns updated) for request 0
Processing the pre-proxy section of radiusd.conf
modcall: entering group pre-proxy for request 0
preproxy_users: Matched entry DEFAULT at line 18
radius_xlat: '[EMAIL PROTECTED]'
modcall[pre-proxy]: module "files" returns ok for request 0
modcall: leaving group pre-proxy (returns ok) for request 0
Sending Access-Request of id 0 to 10.18.1.37 port 1812
User-Name := "[EMAIL PROTECTED]"
NAS-IP-Address = 172.16.73.1
NAS-Port = 2
Framed-MTU = 1400
Called-Station-Id = "00:04:96:28:fe:08"
Calling-Station-Id = "00:90:96:b0:a4:45"
NAS-Port-Type = Wireless-802.11
NAS-Identifier = "WM1000"
EAP-Message =
0x0200001d0161646d2e737566666f6c6b2e6564755c726d636775697265
Message-Authenticator = 0x00000000000000000000000000000000
Proxy-State = 0x313330
Thread 1 waiting to be assigned a request
rad_recv: Access-Reject packet from host 10.18.1.37:1812, id=0, length=25
--- Walking the entire request list ---
Thread 2 got semaphore
Thread 2 handling request 0, (1 handled so far)
Waking up in 5 seconds...
Proxy-State = 0x313330
Processing the post-proxy section of radiusd.conf
modcall: entering group post-proxy for request 0
modcall[post-proxy]: module "eap" returns noop for request 0
modcall: leaving group post-proxy (returns noop) for request 0
Delaying request 0 for 1 seconds
Finished request 0
Going to the next request
Thread 2 waiting to be assigned a request
rad_recv: Access-Request packet from host 10.8.1.254:32933, id=130,
length=165
--- Walking the entire request list ---
Thread 3 got semaphore
Thread 3 handling request 1, (1 handled so far)
Waking up in 5 seconds...
User-Name = "adm.suffolk.edu\\rmcguire"
NAS-IP-Address = 172.16.73.1
NAS-Port = 2
Framed-MTU = 1400
Called-Station-Id = "00:04:96:28:fe:08"
Calling-Station-Id = "00:90:96:b0:a4:45"
NAS-Port-Type = Wireless-802.11
NAS-Identifier = "WM1000"
EAP-Message =
0x0200001d0161646d2e737566666f6c6b2e6564755c726d636775697265
Message-Authenticator = 0x65a0798a34907e0f9887a10acdd53806
Processing the authorize section of radiusd.conf
modcall: entering group authorize for request 1
modcall[authorize]: module "preprocess" returns ok for request 1
modcall[authorize]: module "chap" returns noop for request 1
modcall[authorize]: module "mschap" returns noop for request 1
rlm_realm: No '@' in User-Name = "adm.suffolk.edu\rmcguire", skipping
NULL due to config.
modcall[authorize]: module "suffix" returns noop for request 1
rlm_realm: Looking up realm "adm.suffolk.edu" for User-Name =
"adm.suffolk.edu\rmcguire"
rlm_realm: Found realm "adm.suffolk.edu"
rlm_realm: Proxying request from user rmcguire to realm adm.suffolk.edu
rlm_realm: Adding Realm = "adm.suffolk.edu"
rlm_realm: Preparing to proxy authentication request to realm
"adm.suffolk.edu"
modcall[authorize]: module "ntdomain" returns updated for request 1
rlm_eap: Request is supposed to be proxied to Realm adm.suffolk.edu. Not
doing EAP.
modcall[authorize]: module "eap" returns noop for request 1
users: Matched entry DEFAULT at line 153
modcall[authorize]: module "files" returns ok for request 1
modcall: leaving group authorize (returns updated) for request 1
Processing the pre-proxy section of radiusd.conf
modcall: entering group pre-proxy for request 1
preproxy_users: Matched entry DEFAULT at line 18
radius_xlat: '[EMAIL PROTECTED]'
modcall[pre-proxy]: module "files" returns ok for request 1
modcall: leaving group pre-proxy (returns ok) for request 1
Sending Access-Request of id 1 to 10.18.1.37 port 1812
User-Name := "[EMAIL PROTECTED]"
NAS-IP-Address = 172.16.73.1
NAS-Port = 2
Framed-MTU = 1400
Called-Station-Id = "00:04:96:28:fe:08"
Calling-Station-Id = "00:90:96:b0:a4:45"
NAS-Port-Type = Wireless-802.11
NAS-Identifier = "WM1000"
EAP-Message =
0x0200001d0161646d2e737566666f6c6b2e6564755c726d636775697265
Message-Authenticator = 0x00000000000000000000000000000000
Proxy-State = 0x313330
Thread 3 waiting to be assigned a request
rad_recv: Access-Reject packet from host 10.18.1.37:1812, id=1, length=25
Waking up in 5 seconds...
Thread 4 got semaphore
Thread 4 handling request 1, (1 handled so far)
Proxy-State = 0x313330
Processing the post-proxy section of radiusd.conf
modcall: entering group post-proxy for request 1
modcall[post-proxy]: module "eap" returns noop for request 1
modcall: leaving group post-proxy (returns noop) for request 1
Delaying request 1 for 1 seconds
Finished request 1
Going to the next request
Thread 4 waiting to be assigned a request
--- Walking the entire request list ---
Sending Access-Reject of id 130 to 10.8.1.254 port 32933
Waking up in 1 seconds...
Threads: total/active/spare threads = 5/0/5
--- Walking the entire request list ---
---CUT---
--
=----------------------------------------=
Reynold McGuire
Network Coordinator
Suffolk University, Network Services Group
Phone: 617.994.4277
Fax: 617.573.8747
=----------------------------------------=
PGP Public Key:
http://www.suffolk.edu/nsg/pgp/
echo "send pgp key" | mail [EMAIL PROTECTED]
=----------------------------------------=
PGP Fingerprint:
5779 6011 FAC8 91EE FD93 B408 1296 F6FF CD7E
-----Original Message-----
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED]
On Behalf Of Phil Mayers
Sent: Friday, April 21, 2006 4:11 PM
To: FreeRadius users mailing list
Subject: Re: Proxy Question
Reynold McGuire wrote:
> Thanks for the reply.
>
> I forgot to mention that I had 'ntdomain' addedd to the authorize stanze.
>
> The request is getting to my IAS server, but IAS doesnt understand
> "DOMAIN\username" it does, at least in my implementation, understand
> "[EMAIL PROTECTED]"...
>
Gah. Shudder.
> Is there a way to get "DOMAIN\username" converted to "[EMAIL PROTECTED]"?
You could try this in /etc/raddb/preproxy_users
DEFAULT
User-Name := `%{Stripped-User-Name:[EMAIL PROTECTED]
Be sure to add the "files" module to the "pre-proxy" section in radiusd.conf
like so:
pre-proxy {
files
}
Seems to work here for me, with the exception that requests matching the
DEFAULT realm e.g. "foo\username" are sent as "[EMAIL PROTECTED]" instead of
"[EMAIL PROTECTED]". Annoying, but not an issue if you're explicitly spelling
out
your realms.
>
> This is also using the radtest program with the following input:
>
> ./radtest "adm.suffolk.edu\\\\rmcguire" "password" 127.0.0.1 20 secret
>
>
> Here is radiusd -X
>
> [EMAIL PROTECTED]:5:./radiusd -X
> Starting - reading configuration files ...
> reread_config: reading radiusd.conf
> Config: including file: /apps/renn/freeRadius/etc/raddb/proxy.conf
> Config: including file: /apps/renn/freeRadius/etc/raddb/clients.conf
> Config: including file: /apps/renn/freeRadius/etc/raddb/snmp.conf
> Config: including file: /apps/renn/freeRadius/etc/raddb/eap.conf
> Config: including file: /apps/renn/freeRadius/etc/raddb/sql.conf
> main: prefix = "/apps/renn/freeRadius"
> main: localstatedir = "/apps/renn/freeRadius/var"
> main: logdir = "/apps/renn/freeRadius/var/log/radius"
> main: libdir = "/apps/renn/freeRadius/lib"
> main: radacctdir = "/apps/renn/freeRadius/var/log/radius/radacct"
> main: hostname_lookups = no
> main: max_request_time = 30
> main: cleanup_delay = 5
> main: max_requests = 1024
> main: delete_blocked_requests = 0
> main: port = 0
> main: allow_core_dumps = no
> main: log_stripped_names = no
> main: log_file = "/apps/renn/freeRadius/var/log/radius/radius.log"
> main: log_auth = no
> main: log_auth_badpass = no
> main: log_auth_goodpass = no
> main: pidfile = "/apps/renn/freeRadius/var/run/radiusd/radiusd.pid"
> main: user = "(null)"
> main: group = "(null)"
> main: usercollide = no
> main: lower_user = "no"
> main: lower_pass = "no"
> main: nospace_user = "no"
> main: nospace_pass = "no"
> main: checkrad = "/apps/renn/freeRadius/sbin/checkrad"
> main: proxy_requests = yes
> proxy: retry_delay = 5
> proxy: retry_count = 3
> proxy: synchronous = no
> proxy: default_fallback = yes
> proxy: dead_time = 120
> proxy: post_proxy_authorize = yes
> proxy: wake_all_if_all_dead = no
> security: max_attributes = 200
> security: reject_delay = 1
> security: status_server = no
> main: debug_level = 0
> read_config_files: reading dictionary
> read_config_files: reading naslist
> Using deprecated naslist file. Support for this will go away soon.
> read_config_files: reading clients
> read_config_files: reading realms
> radiusd: entering modules setup
> Module: Library search path is /apps/renn/freeRadius/lib
> Module: Loaded exec
> exec: wait = yes
> exec: program = "(null)"
> exec: input_pairs = "request"
> exec: output_pairs = "(null)"
> exec: packet_type = "(null)"
> rlm_exec: Wait=yes but no output defined. Did you mean output=none?
> Module: Instantiated exec (exec)
> Module: Loaded expr
> Module: Instantiated expr (expr)
> Module: Loaded PAP
> pap: encryption_scheme = "crypt"
> Module: Instantiated pap (pap)
> Module: Loaded CHAP
> Module: Instantiated chap (chap)
> Module: Loaded MS-CHAP
> mschap: use_mppe = yes
> mschap: require_encryption = no
> mschap: require_strong = no
> mschap: with_ntdomain_hack = no
> mschap: passwd = "(null)"
> mschap: authtype = "MS-CHAP"
> mschap: ntlm_auth = "(null)"
> Module: Instantiated mschap (mschap)
> Module: Loaded System
> unix: cache = no
> unix: passwd = "(null)"
> unix: shadow = "(null)"
> unix: group = "(null)"
> unix: radwtmp = "/apps/renn/freeRadius/var/log/radius/radwtmp"
> unix: usegroup = no
> unix: cache_reload = 600
> Module: Instantiated unix (unix)
> Module: Loaded eap
> eap: default_eap_type = "md5"
> eap: timer_expire = 60
> eap: ignore_unknown_eap_types = yes
> eap: cisco_accounting_username_bug = no
> rlm_eap: Loaded and initialized type md5
> rlm_eap: Loaded and initialized type leap
> gtc: challenge = "Password: "
> gtc: auth_type = "PAP"
> rlm_eap: Loaded and initialized type gtc
> tls: rsa_key_exchange = no
> tls: dh_key_exchange = yes
> tls: rsa_key_length = 512
> tls: dh_key_length = 512
> tls: verify_depth = 0
> tls: CA_path = "(null)"
> tls: pem_file_type = yes
> tls: private_key_file =
> "/apps/renn/freeRadius/etc/raddb/certs/cert-srv.pem"
> tls: certificate_file =
> "/apps/renn/freeRadius/etc/raddb/certs/cert-srv.pem"
> tls: CA_file = "/apps/renn/freeRadius/etc/raddb/certs/root.pem"
> tls: private_key_password = "whatever"
> tls: dh_file = "/apps/renn/freeRadius/etc/raddb/certs/dh"
> tls: random_file = "/apps/renn/freeRadius/etc/raddb/certs/random"
> tls: fragment_size = 1024
> tls: include_length = yes
> tls: check_crl = no
> tls: check_cert_cn = "(null)"
> rlm_eap_tls: Loading the certificate file as a chain
> rlm_eap: Loaded and initialized type tls
> ttls: default_eap_type = "mschapv2"
> ttls: copy_request_to_tunnel = no
> ttls: use_tunneled_reply = yes
> rlm_eap: Loaded and initialized type ttls
> peap: default_eap_type = "mschapv2"
> peap: copy_request_to_tunnel = no
> peap: use_tunneled_reply = no
> peap: proxy_tunneled_request_as_eap = yes
> rlm_eap: Loaded and initialized type peap
> mschapv2: with_ntdomain_hack = no
> rlm_eap: Loaded and initialized type mschapv2
> Module: Instantiated eap (eap)
> Module: Loaded preprocess
> preprocess: huntgroups = "/apps/renn/freeRadius/etc/raddb/huntgroups"
> preprocess: hints = "/apps/renn/freeRadius/etc/raddb/hints"
> preprocess: with_ascend_hack = no
> preprocess: ascend_channels_per_line = 23
> preprocess: with_ntdomain_hack = no
> preprocess: with_specialix_jetstream_hack = no
> preprocess: with_cisco_vsa_hack = no
> Module: Instantiated preprocess (preprocess)
> Module: Loaded realm
> realm: format = "suffix"
> realm: delimiter = "@"
> realm: ignore_default = no
> realm: ignore_null = yes
> Module: Instantiated realm (suffix)
> realm: format = "prefix"
> realm: delimiter = "\"
> realm: ignore_default = no
> realm: ignore_null = yes
> Module: Instantiated realm (ntdomain)
> Module: Loaded files
> files: usersfile = "/apps/renn/freeRadius/etc/raddb/users"
> files: acctusersfile = "/apps/renn/freeRadius/etc/raddb/acct_users"
> files: preproxy_usersfile =
> "/apps/renn/freeRadius/etc/raddb/preproxy_users"
> files: compat = "no"
> Module: Instantiated files (files)
> Module: Loaded Acct-Unique-Session-Id
> acct_unique: key = "User-Name, Acct-Session-Id, NAS-IP-Address,
> Client-IP-Address, NAS-Port"
> Module: Instantiated acct_unique (acct_unique)
> Module: Loaded detail
> detail: detailfile =
> "/apps/renn/freeRadius/var/log/radius/radacct/%{Client-IP-Address}/det
> ail-%Y
> %m%d"
> detail: detailperm = 384
> detail: dirperm = 493
> detail: locking = no
> Module: Instantiated detail (detail)
> Module: Loaded radutmp
> radutmp: filename = "/apps/renn/freeRadius/var/log/radius/radutmp"
> radutmp: username = "%{User-Name}"
> radutmp: case_sensitive = yes
> radutmp: check_with_nas = yes
> radutmp: perm = 384
> radutmp: callerid = yes
> Module: Instantiated radutmp (radutmp) Listening on authentication
> *:1645 Listening on accounting *:1646 Listening on proxy *:1647 Ready
> to process requests.
> rad_recv: Access-Request packet from host 127.0.0.1:34507, id=40,
length=76
> User-Name = "adm.suffolk.edu\\rmcguire"
> User-Password = "password"
> NAS-IP-Address = 255.255.255.255
> NAS-Port = 20
> Processing the authorize section of radiusd.conf
> modcall: entering group authorize for request 0
> modcall[authorize]: module "preprocess" returns ok for request 0
> modcall[authorize]: module "chap" returns noop for request 0
> modcall[authorize]: module "mschap" returns noop for request 0
> rlm_realm: No '@' in User-Name = "adm.suffolk.edu\rmcguire",
> skipping NULL due to config.
> modcall[authorize]: module "suffix" returns noop for request 0
> rlm_realm: Looking up realm "adm.suffolk.edu" for User-Name =
> "adm.suffolk.edu\rmcguire"
> rlm_realm: Found realm "adm.suffolk.edu"
> rlm_realm: Proxying request from user rmcguire to realm
adm.suffolk.edu
> rlm_realm: Adding Realm = "adm.suffolk.edu"
> rlm_realm: Preparing to proxy authentication request to realm
> "adm.suffolk.edu"
> modcall[authorize]: module "ntdomain" returns updated for request 0
> rlm_eap: No EAP-Message, not doing EAP
> modcall[authorize]: module "eap" returns noop for request 0
> users: Matched entry DEFAULT at line 153
> modcall[authorize]: module "files" returns ok for request 0
> modcall: leaving group authorize (returns updated) for request 0
> Sending Access-Request of id 0 to 10.18.1.37 port 1812
> User-Name = "adm.suffolk.edu\\rmcguire"
> User-Password = "t<[EMAIL PROTECTED]"
> NAS-IP-Address = 255.255.255.255
> NAS-Port = 20
> Proxy-State = 0x3430
> --- Walking the entire request list --- Waking up in 6 seconds...
> rad_recv: Access-Reject packet from host 10.18.1.37:1812, id=0, length=24
> Proxy-State = 0x3430
> Processing the post-proxy section of radiusd.conf
> modcall: entering group post-proxy for request 0
> modcall[post-proxy]: module "eap" returns noop for request 0
> modcall: leaving group post-proxy (returns noop) for request 0
> Delaying request 0 for 1 seconds Finished request 0 Going to the next
> request Waking up in 6 seconds...
> rad_recv: Access-Request packet from host 127.0.0.1:34507, id=40,
> length=76 Sending Access-Reject of id 40 to 127.0.0.1 port 34507
> --- Walking the entire request list --- Waking up in 3 seconds...
> --- Walking the entire request list --- Cleaning up request 0 ID 40
> with timestamp 4448d631 Nothing to do. Sleeping until we see a
> request.
> -----Original Message-----
> From: Bjørn Mork [mailto:[EMAIL PROTECTED]
> Sent: Friday, April 21, 2006 8:42 AM
> To: [EMAIL PROTECTED]
> Cc: FreeRadius users mailing list
> Subject: Re: Proxy Question
>
> "Reynold McGuire" <[EMAIL PROTECTED]> writes:
>
>> How can I get freeRadius to see "domain.com\username" and convert
>> that to "[EMAIL PROTECTED]" and proxy that off?
>
> If you need both styles:
>
> modules {
> ..
> realm suffix {
> format = suffix
> delimiter = "@"
> ignore_default = no
> ignore_null = yes
> }
> realm ntdomain {
> format = prefix
> delimiter = "\\"
> ignore_default = no
> ignore_null = yes
> }
> ..
> }
>
> authorize {
> ..
> suffix
> ntdomain
> ..
> }
>
> Please run radiusd -X if this doesn't work,
>
>
>
> Bjørn
>
>
>
> -
> List info/subscribe/unsubscribe? See
> http://www.freeradius.org/list/users.html
-
List info/subscribe/unsubscribe? See
http://www.freeradius.org/list/users.html
-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
