Dear all,
Using FB 6.0, FR 1.0.5 (will upgrade soon)
I've problem with timeout...
I've set in users file as below in order to load timeout value depending on
type of connection (ISDN/PSTN)
DEFAULT NAS-Port-Type == "Sync", Autz-Type := DIALUP,
Auth-Type := DIALUP
Session-Timeout =
`%{exec:/usr/local/etc/raddb/timeout.pl %U ISDN}`
DEFAULT NAS-Port-Type == "Async", Autz-Type := DIALUP,
Auth-Type := DIALUP
Session-Timeout =
`%{exec:/usr/local/etc/raddb/timeout.pl %U PSTN}`value
The problem is when "Session-Timeout =0", normally happen when script cannot
load value... it will NOT timeout... user till can get connect until
manually disconnect...
Below is the debug log...
Login OK: [integ36] (from client INFRANETTEST port 300 cli 55550000)
Sending Access-Accept of id 111 to 10.1.1.1:1645
Session-Timeout = 0
Framed-Compression = Van-Jacobson-TCP-IP
Framed-MTU = 1500
Framed-Protocol = PPP
Service-Type = Framed-User
Finished request 89
Going to the next request
--- Walking the entire request list ---
Waking up in 6 seconds...
rad_recv: Accounting-Request packet from host 10.1.1.1:1646, id=97,
length=131
Acct-Session-Id = "000000AE"
Framed-Protocol = PPP
User-Name = "integ36"
Acct-Authentic = RADIUS
Acct-Status-Type = Start
Calling-Station-Id = "55550000"
Called-Station-Id = "2426"
NAS-Port-Type = Async
Connect-Info = "50667/24000 V90/V44/LAPM"
NAS-Port = 300
Service-Type = Framed-User
NAS-IP-Address = 10.1.1.1
Acct-Delay-Time = 0
.
.
.
.
rad_recv: Accounting-Request packet from host 10.1.1.1:1646, id=98,
length=173
Acct-Session-Id = "000000AE"
Framed-Protocol = PPP
Framed-IP-Address = 10.1.1.3
User-Name = "integ36"
Acct-Authentic = RADIUS
Acct-Session-Time = 26
Acct-Input-Octets = 8110
Acct-Output-Octets = 4998
Acct-Input-Packets = 92
Acct-Output-Packets = 37
Acct-Terminate-Cause = User-Request
Acct-Status-Type = Stop
Calling-Station-Id = "55550000"
Called-Station-Id = "2426"
NAS-Port-Type = Async
Connect-Info = "50667/24000 V90/V44/LAPM"
NAS-Port = 300
Service-Type = Framed-User
NAS-IP-Address = 10.1.1.1
Acct-Delay-Time = 0
-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
