Well I'm trying to configure 2 pools of IPs, where these pools should be created? can it be done on the radius and this radius will take care of giving the IPs to the users? or should I configure a dhcp and relay it to the radius?
I tried to configure on the radius , in the config file file, in the ippools section, 2 pools of IPs, but it didn't work. Thanks Elie -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Peter Nixon Sent: Friday, July 21, 2006 10:44 AM To: FreeRadius users mailing list Subject: Re: configuring FreeRadius pools Welli The problem is you still haven't exactly explained what you are trying to do with radius. Are you assigning the IP addresses from pools on radius or pools on the patton? Assuming that radius is assigning the pools, you simply need to create 2 of them. (Read the radiusd.conf the comments explain it) Then configure radius to return an address from the first pool by default, and the second pool when the patton sends whatever information it sends to say that the user is authed or valid or whatever. You need to figure that out as I dont have any experience with patton. RADIUS is not magic. It can only respond when asked a question, and it can only give an answer based on what it is asked. You therefore need to make sure that patton is asking 2 different questions, and configure your 2 different replies based on what question it is asking... radiusd -X (debug mode) is your friend in this instance.. Hope that Helps -Peter On Fri 21 Jul 2006 10:16, Elie Hani wrote: > Thanks Alan, but this was not my problem. My problem is in configuring the > IP pools, I need a way to configure the 2 pools of IPs which are one Fake > and the other Real. I don't have a problem in redirection, it's in how to > configure the 2 pools of IPs. > > Thanks > Elie > > -----Original Message----- > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED] On > Behalf Of Alan DeKok > Sent: Thursday, July 20, 2006 5:16 PM > To: FreeRadius users mailing list > Subject: Re: configuring FreeRadius pools > > "Elie Hani" <[EMAIL PROTECTED]> wrote: > > I want to configure 2 pools, the first one is a fake IP pool,where the > > dial > > > up user on the patton gets an IP from this pool, and then he will enter > > the > > > necessary information, once all the informations entered are true, he > > will reconnect with his new username, then he will get an IP from the > > other > > pool > > > wich contains real IPs. > > This is called a "captive portal". Please use on of those, which > solves most of these problems for you, including IP allocation. > > Alan DeKok. > > - > List info/subscribe/unsubscribe? See > http://www.freeradius.org/list/users.html > > - > List info/subscribe/unsubscribe? See > http://www.freeradius.org/list/users.html -- Peter Nixon http://www.peternixon.net/ PGP Key: http://www.peternixon.net/public.asc - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
