As a matter of fact, for the first login, the users will have an IP from a certain pool X, once the informations are entered, and after redialing, the users will get the new IP from the second pool Y.
All I want to know is if it's possible to bind the radius to a DHCP server, if yes how it can be done? Otherwise, is there any other pssible method to configure 2 pools of Ips X and Y and relay it to the DHCP? Thanks Elie -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Alan DeKok Sent: Tuesday, July 25, 2006 12:23 PM To: FreeRadius users mailing list Subject: Re: Binding FreeRadius to the DHCP Server "Elie Hani" <[EMAIL PROTECTED]> wrote: > I have a patton RAS, when a dial up user connects to this server, he > should get a faked IP and he will be redirected to a site where he > should enter all the necessary information. Sounds like a captive portal to me. > So I have to configure a DHCP server and bind it to the FreeRadius in > a manner that when the user dials in to the RAS for the first time, he > will be using a common username and password (user: guest pass: guest > for example), he will get a fake IP from a pool configured on the DHCP server. Write a script. The server doesn't normally interact with DHCP. > Once he enteres all the necessary informations, he will reconnect > using the desired authentication entered previousely, and he will get > a real IP from another pool also configured on the DHCP. What you're saying is a very convoluted way of: a) some users get IP's from pool X b) other users get IP's from pool Y Alan DeKOk. - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
