--On Wednesday, 26 July 2006 18:39 -0700 Thai Duong <[EMAIL PROTECTED]>
wrote:
--- Josh Howlett <[EMAIL PROTECTED]> wrote:
Is there a RADIUS or EAP timer set on the switch?
If it's set too low, the switch might be ignoring
the Access-
Challenge from the server.
best regards, josh.
Yup there're some timers on the switch but as far as I
know they have no effect on the communication between
the switch and the server. Is there anybody here had
used Catalyst 2950 with freeradius before? Searching
Google reveals that people seems only configure
EAP/TLS to protect wireless LAN, not wired LAN. Where
can I find a sucessful EAP/TLS setup with details
about hardware/software components?
Hi,
We had similar problems. An example of what we put in the switch config
to get it to work is here:
<http://www.bristol.ac.uk/is/computing/advice/networks/documentation/dot1x/cisco.html>
... as Josh said - pay particular attention to the dot1x & radius server
timeout settings - we found the cisco defaults be be generally broken.
Regards,
James
--
James J J Hooper,
Information Services
University of Bristol
--
-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
