"Giuseppina Venezia" <[EMAIL PROTECTED]> wrote: > Thank you, Alan. Now, I have decommented "files", it reads "users" but give > the same error. I'll paste the log and the "authorize" configuration of > radius.conf: ... > Ready to process requests. > rad_recv: Access-Request packet from host 192.168.1.96:2061, id=1, length= > 69 > Ignoring request from unknown client 192.168.1.96:2061
That's a problem. Please fix that, AND post logs from ONE CLIENT only. Posting logs that include packets from multiple clients makes it impossible to figure out the problem. > rad_check_password: Found Auth-Type LDAP > auth: type Local You're kidding, right? If this is really what's going on, then you spent a LOT of effort to break the default configuration. > users: Matched entry DEFAULT at line 152 So... what's on line 152? Go read it. > rlm_ippool: Could not find Pool-Name attribute. Probably because the entry setting the Pool-Name isn't on line 152. Honestly, you're going through enormous amounts of effort to get this working. Almost all of that effort is wasted, because you've ALSO spent enormous amounts of effort breaking the default configuration. Please start with the default configuration. What you're using now is so completely broken that it's simply too difficult to fix it. Then, configure the IP pool module. Change NOTHING else in the default configuration. Then, add a "users" file entry setting the pool name, and a password for a test user. See the FAQ. Then test it. Get THAT to work, and then start working on LDAP, and everything else. Again, please stop trying so hard to break the default configuration. It's clear you're not familiar with the way the server works, and that's OK. But it means that you SHOULD NOT be making massive edits to the default config, as you've been doing. It's causing nothing but problems. Alan DeKok. -- http://deployingradius.com - The web site of the book http://deployingradius.com/blog/ - The blog - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
