Hi Nathan,
thanks for your replay - I really appreciate it. I have been busy
myself with some other issues and had no time to dive deeper into FR
on the Mac - but I will and I will also share any information I gain
with the list.
Thanks,
Stephan
Am 18.08.2006 um 18:48 schrieb Nathan Cable:
Sorry about the long delay on the response. I'll try to add
something of
value to the discussion...
The information on the page is dated, but it's accurate. You can also
ignore some of the information, as the current stable version of
FreeRadius
seems to have everything set up and ready to go. All you need to
do is
enable the relevant sections of eap.conf (using the test certificates
works), and add an entry for the base station in clients.conf.
I don't run FR on a Mac server, but I did a quick test before
sending this
email, and everything compiled fine. Make sure you read the Mac
relevant
docs in the /doc directory of the distribution - there's a couple of
important notes about compiling.
As for grouping the access points, check out /doc/Autz-type. It
describes
how to set up different realms. I tried doing just that, but I
haven't had
any success with it. I'm going to do a separate post in the immediate
future.
Let me know if you've had any luck!
Nathan
On 8/13/06 1:22 AM, "Stephan Budach" <[EMAIL PROTECTED]> wrote:
Hi Nathan,
yes, the goal is to authenticate wireless users. I have already taken
a look at Andreas' web page, but the information seems a bit outdated
to me.
At this time I am wondering whether to go with darwinports'
freeradius package or with one of the other two installers. Actually
I can't figure out what this "experimental" opendirectory plugim is
about and if its part of the regular FreeRADIUS source.
The final setup I want to achieve is to have three groups of
Accesspoints, one for internal users, one for freelancers and one for
guests. The access to these accesspoints should be controlled by
three corresponding groups on our OpenDirectory server, without the
need to have these clients manually added to the clients file. Okay,
maintaining the clients file could be done with a script as well.
Is this possible with FreeRADIUS?
Thanks,
Stephan
-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/
users.html
--
Stephan Budach
Jung von Matt/it-services GmbH
Glashüttenstrasse 79
20357 Hamburg
Tel: +49 (40) 4321-1353
Fax: +49 (40) 4321-1114
http://www.jvm.de
-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
