You have to tell the server which pool to use. See the rlm_ippool
documentation.
Alan DeKok.
Ok,thanks Alan
I've read the documentation about rlm_ippool on freeradius wiki and in
particular
http://wiki.freeradious.org/index.php/Ippool_and_radius_clients (I've
not found rlm_ippool documentation in freeradius installed docs).
Now I've specified the NAS-IP-Address and NAS-Identifier in
chillispot, with the same results when I try to login with this user:
prova Pool-Name:="main_pool", Auth-Type := Local, User-Password == "a"
Service-Type = Framed-User,
Fall-Through = no
defined in users file
This is the new output:
rlm_ippool: Searching for an entry for nas/port: 127.0.0.1/1
rlm_ippool: Searching for an entry for nas/port: 127.0.0.1/1
rlm_ippool: Allocating ip to nas/port: 127.0.0.1/1
rlm_ippool: num: 1
rlm_ippool: Allocated ip 192.168.182.138 to client on nas 127.0.0.1,port 1
modcall[post-auth]: module "main_pool" returns ok for request 0
modcall: leaving group post-auth (returns ok) for request 0
Sending Access-Accept of id 0 to 127.0.0.1 port 1061
Service-Type = Framed-User
Framed-IP-Address = 192.168.182.138
Framed-IP-Netmask = 255.255.255.0
Finished request 0
Going to the next request
--- Walking the entire request list ---
Waking up in 6 seconds...
rad_recv: Accounting-Request packet from host 127.0.0.1:1059, id=0, length=134
Acct-Status-Type = Start
User-Name = "prova"
Calling-Station-Id = "00-02-C7-8F-A0-16"
Called-Station-Id = "00-50-BF-E3-E8-2A"
NAS-Port-Type = Wireless-802.11
NAS-Port = 1
NAS-Port-Id = "00000001"
NAS-IP-Address = 127.0.0.1
NAS-Identifier = "localhost"
Framed-IP-Address = 192.168.182.3
Acct-Session-Id = "44f0825400000001"
Processing the preacct section of radiusd.conf
When I try to login with LDAP users the debug says that can't find
Pool-Name attribute (but as shown in the first post) Pool-Name
attribute is set in the users file.
What's wrong in the first and in the second cases?
Thanks, Giusy
-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
