Loukas Kalenderidis <[EMAIL PROTECTED]> wrote: > I've configured FreeRADIUS as best I can figure > from what I've found on the web, but I'm having no success with > getting WPA to work. I'm using a D-Link 2100AP access point, and a > Mac OS X 10.4 client. From what I can gather it seems that I might > have misconfigured FreeRADIUS, based on the error message below. > > I've configured a test user as follows: > pants Auth-Type := Accept
That won't make WPA work. WPA requires a whole bunch of data exchange before all the machines involved believe that net access has been granted. You have to configure users, passwords, and certificates for it to work. > The last 3 lines I found in a tutorial on the web, but I'm not sure > if they are necessary or not (and commenting them out makes no > difference). They're for VLAN assignment. You don't need them. > Watching the traffic shows the Access-Accept packet being sent back > to the AP, but confusingly the AP sends an Access-Accept back to the > RADIUS server! (10.0.0.100 is the AP, 10.0.0.101 is the RADIUS server): That's what the debug log shows, too. I'm a little surprised that the AP is sending the Access-Request back to the server. Since you've configured the server to do something the AP doesn't expect, I guess you're in an untested area of its behavior. Alan DeKok. -- http://deployingradius.com - The web site of the book http://deployingradius.com/blog/ - The blog - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
