I am using Cisco 3600. In my case, I have found out the following issues with AV pairs:
Call Leg 1:
Cisco sends the following AV pairs to the radius server:
User-Name
User-Password
h323-conf-id
Cisco-AVPair=h323-ivr-out
NAS-Port-Type
cisco-nas-port
NAS-Port
Cisco-AVPair=interface
Service-Type
NAS-IP-Address
Cisco expects to see the following AV pairs sent by the radius server:
h323-credit-amount
h323-credit-time
h323-return-code
Call Leg 2:
Cisco sends the following AV pairs to the radius server:
User-Name
User-Password
h323-conf-id
Cisco-AVPair=h323-ivr-out
Called-Station-Id
Service-Type
NAS-IP-Address
Cisco expects to see the following AV pairs sent by the radius server:
h323-credit-amount
h323-credit-time
h323-return-code
The above AV pairs are for authenticating the user, after these two call legs, you should concern accounting the user. I think there are no AV pairs sent by the radius server for accounting, since it just waits until Cisco sends the stop packet. Of course, there are two different sets of AV pairs that are both have Acct-Status-Type=stop, but these two sets are for Call Leg 3 and 4, and they differ in one or two AV pairs from which you can determine the different call legs.
Hope this information can help you.
Best Ragrds
Ali
On 9/6/06, Geoffrey Cauchi <[EMAIL PROTECTED]
> wrote:
Not much mention there unfortunately. A practical example would help me
most.
Thanks
Gef
-----Original Message-----
From: freeradius-users-bounces+agcauchi=[EMAIL PROTECTED]
[mailto: [EMAIL PROTECTED]
rg] On Behalf Of Alan DeKok
Sent: 06 September 2006 18:00
To: FreeRadius users mailing list
Subject: Re: Freeradius + Cisco VoIP
"Geoffrey Cauchi" <[EMAIL PROTECTED]> wrote:
> Can anyone provide a sample config of the AV Pairs required by a cisco
VoIP
> gateway to accept a user?
See the NAS documentation.
Alan DeKok.
--
http://deployingradius.com - The web site of the book
http://deployingradius.com/blog/ - The blog
-
List info/subscribe/unsubscribe? See
http://www.freeradius.org/list/users.html
-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
- List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
