I am just starting looking into this, but it seems that the
Called-Station-ID being logged from my Cisco AP's is off: What I see in
the log is the following:
Called-Station-Id = "0017.0f8c.25c1"
However, the cisco itself shows something slightly different:
Mac Address 0017.0f8c.25c0
As you can see, the last digit is off.
This is not the only one. Another example....
Called-Station-Id = "0013.6078.7661"
MAC Address 00:13:60:78:76:60
The only other system I have on the system (Bluesocket) does not have this
discrepancy.
I have searched through the archives, but trying to limit search by
Called-Station-Id and cisco does not help a lot. Have others seen/noticed
this before? If so any pointers to information on it? If not, can anyone
else look and see if they are having a similar issue?
Here is the information on AP
Cisco Aironet 1200 IOS
Firmware: 12.3(8)JA2
Using FreeRadius 1.1.2
The only conf file that even mentioned called station ID (that I am using)
is radiusd.conf. Here is the subsection
#attr_rewrite sanecallerid {
# attribute = Called-Station-Id
# may be "packet", "reply", "proxy", "proxy_reply" or "config"
# searchin = packet
# searchfor = "[+ ]"
# replacewith = ""
# ignore_case = no
# new_attribute = no
# max_matches = 10
# ## If set to yes then the replace string will be appended
# to the original string
# append = no
#}
As it is commented out I do not see that it could be the issue.
If you want any conf files let me know, I just did not want to clog up the
message with lots of conf info that is not useful.
Thanks to all.
-- Walter Reynolds
Principle Systems Security Development Engineer
Information Technology Central Services
University of Michigan
(734)615-9438
-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
