Hello, Here is the debug info:
>From the information it looks like I have added the information correctly >however it is not sent to the client: --snip-- rlm_perl: Added pair Framed-Protocol = PPP rlm_perl: Added pair Framed-Netmask = 255.255.255.255 rlm_perl: Added pair Service-Type = Framed-User rlm_perl: Added pair Framed-IP-Address = 192.168.77.200 rlm_perl: Added pair Framed-Compression = Van-Jacobson-TCP-IP rlm_perl: Added pair Framed-MTU = 576 rlm_perl: Added pair Framed-Protocol = PPP rlm_perl: Added pair NT-Password = 213C197ADF831F46188DC68E3F46860F rlm_perl: Added pair Service-Type = Framed-User rlm_perl: Added pair Auth-Type = MS-CHAP ...... Sending Access-Accept of id 70 to 127.0.0.1 port 32809 Framed-IP-Address = 255.255.255.254 Framed-MTU = 576 Service-Type = Framed-User Framed-Protocol = PPP Framed-Compression = Van-Jacobson-TCP-IP Framed-Netmask = 255.255.255.255 MS-CHAP2-Success = 0xa4533d41433543323433323341454632313338464643433730443243453533314646353533423131354634 MS-MPPE-Recv-Key = 0xae0f9b99af199f01fe9ab857a793739a MS-MPPE-Send-Key = 0x3c24917e4b02abdc1bd303ea21d95b71 MS-MPPE-Encryption-Policy = 0x00000002 MS-MPPE-Encryption-Types = 0x00000004 --snip-- So any feedback would be helpful, the whole debug info is below: --snip-- rad_recv: Access-Request packet from host 127.0.0.1:32809, id=70, length=146 Service-Type = Framed-User Framed-Protocol = PPP User-Name = "rigvpn_user1" MS-CHAP-Challenge = 0xee068979e7bafef383f8c90f3520d8e9 MS-CHAP2-Response = 0xa400809dff2ecb2017413f1b7b5b71e5e1f30000000000000000cee84de052f0d485d683d9350d9fd4b4410744a13cc2de0c Calling-Station-Id = ".271" NAS-IP-Address = 127.0.0.1 NAS-Port = 0 Processing the authorize section of radiusd.conf modcall: entering group authorize for request 0 modcall[authorize]: module "preprocess" returns ok for request 0 modcall[authorize]: module "chap" returns noop for request 0 rlm_mschap: Found MS-CHAP attributes. Setting 'Auth-Type = mschap' modcall[authorize]: module "mschap" returns ok for request 0 users: Matched entry DEFAULT at line 152 users: Matched entry DEFAULT at line 175 users: Matched entry DEFAULT at line 187 modcall[authorize]: module "files" returns ok for request 0 perl_pool: item 0x8eecac0 asigned new request. Handled so far: 1 found interpetator at address 0x8eecac0 rlm_perl: PASON RPM AUTH REQUEST: Service-Type = Framed-User rlm_perl: PASON RPM AUTH REQUEST: Calling-Station-Id = .271 rlm_perl: PASON RPM AUTH REQUEST: MS-CHAP-Challenge = 0xee068979e7bafef383f8c90f3520d8e9 rlm_perl: PASON RPM AUTH REQUEST: Client-IP-Address = 127.0.0.1 rlm_perl: PASON RPM AUTH REQUEST: Framed-Protocol = PPP rlm_perl: PASON RPM AUTH REQUEST: User-Name = rigvpn_user1 rlm_perl: PASON RPM AUTH REQUEST: MS-CHAP2-Response = 0xa400809dff2ecb2017413f1b7b5b71e5e1f30000000000000000cee84de052f0d485d683d9350d9fd4b4410744a13cc2de0c rlm_perl: PASON RPM AUTH REQUEST: NAS-IP-Address = 127.0.0.1 rlm_perl: PASON RPM AUTH REQUEST: NAS-Port = 0 rlm_perl: Added pair Framed-Protocol = PPP rlm_perl: Added pair Framed-Netmask = 255.255.255.255 rlm_perl: Added pair Service-Type = Framed-User rlm_perl: Added pair Framed-IP-Address = 192.168.77.200 rlm_perl: Added pair Framed-Compression = Van-Jacobson-TCP-IP rlm_perl: Added pair Framed-MTU = 576 rlm_perl: Added pair Framed-Protocol = PPP rlm_perl: Added pair NT-Password = 213C197ADF831F46188DC68E3F46860F rlm_perl: Added pair Service-Type = Framed-User rlm_perl: Added pair Auth-Type = MS-CHAP perl_pool total/active/spare [32/0/32] Unreserve perl at address 0x8eecac0 modcall[authorize]: module "perl" returns ok for request 0 modcall: leaving group authorize (returns ok) for request 0 rad_check_password: Found Auth-Type MS-CHAP auth: type "MS-CHAP" Processing the authenticate section of radiusd.conf modcall: entering group MS-CHAP for request 0 rlm_mschap: No User-Password configured. Cannot create LM-Password. rlm_mschap: Found NT-Password rlm_mschap: Told to do MS-CHAPv2 for rigvpn_user1 with NT-Password rlm_mschap: adding MS-CHAPv2 MPPE keys modcall[authenticate]: module "mschap" returns ok for request 0 modcall: leaving group MS-CHAP (returns ok) for request 0 Login OK: [rigvpn_user1/<no User-Password attribute>] (from client localhost port 0 cli .271) Sending Access-Accept of id 70 to 127.0.0.1 port 32809 Framed-IP-Address = 255.255.255.254 Framed-MTU = 576 Service-Type = Framed-User Framed-Protocol = PPP Framed-Compression = Van-Jacobson-TCP-IP Framed-Netmask = 255.255.255.255 MS-CHAP2-Success = 0xa4533d41433543323433323341454632313338464643433730443243453533314646353533423131354634 MS-MPPE-Recv-Key = 0xae0f9b99af199f01fe9ab857a793739a MS-MPPE-Send-Key = 0x3c24917e4b02abdc1bd303ea21d95b71 MS-MPPE-Encryption-Policy = 0x00000002 MS-MPPE-Encryption-Types = 0x00000004 Finished request 0 Going to the next request --- Walking the entire request list --- Waking up in 6 seconds... --- Walking the entire request list --- Cleaning up request 0 ID 70 with timestamp 4538235e Nothing to do. Sleeping until we see a request. --snip-- Michael -----Original Message----- From: [EMAIL PROTECTED] on behalf of Alan DeKok Sent: Thu 10/19/2006 4:21 PM To: FreeRadius users mailing list Subject: Re: static IP's with rlm_perl Michael Gale <[EMAIL PROTECTED]> wrote: > I thought I could assign the IP by using the method below: > > $RAD_REPLY{'Framed-IP-Address'} = '192.168.77.200'; > $RAD_REPLY{'Framed-Netmask'}= '255.255.255.255'; > $RAD_REPLY{'Framed-Protocol'} = 'PPP'; > $RAD_REPLY{'Service-Type'} = 'Framed-User'; > > However it looks like the IP is not being sent back to the client. Did you run the server in DEBUGGING MODE to see if it sent that address in the Access-Accept? If not, why are you avoiding the one tool that will give you the most information about what's really going on? If you did run it in debugging mode, why didn't you post the output here? Honestly... repeating the same comment that you're trying to assign a static IP a second time doesn't help. Giving more information as suggested in the FAQ, README, INSTALL, "man" page, and daily on this list would help. Alan DeKok. -- http://deployingradius.com - The web site of the book http://deployingradius.com/blog/ - The blog - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
<<winmail.dat>>
- List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html