|
Hi All, I am currently configuring
power distribution units(PDU) in our organisation, authentication from
freeradius-1.0.1-3.RHEL4.3 1. I have configured the
dictionary file accordingly. client 131.xxx.xx.xxx {
secret =abcdeffghijk
shortname =PDU1 } client 131.xxx.xx.xxx {
secret =lmnoopqrstuve
shortname =PDU2 } 2. I have also defined the
ATTRIBUTE and VALUE the dictionary file as per APC vendor's instructions VENDOR APC 318 BEGIN-VENDOR APC ATTRIBUTE APC-Service-Type 1
integer APC VALUE APC-Service-Type Admin
1 VALUE APC-Service-Type Device
2 VALUE APC-Service-Type
ReadOnly 3 3. I have modified the users
file , created groups and outlet access for each group. In the below example,I
have given group3 access to outlet3. DEFAULT Group ==
"group3", Auth-Type = System
APC-Service-Type = Outlet,
APC-Outlets = "3",
Fall-Through = No 4. Now, I have 20 PDUs setup
(in pair) and I also would like to restrict the subnets that it can
authenticate from. I would like to set up a rule in user file as following: If pdu1 or pdu2 {if group1 and authenticated
from the approved subnets Then
APC-Service-Type = Outlet,
APC-Outlets = "1", } ....And so on for the rest
of PDU pairs. Has anyone done a similar
setup before? If so, could you please shed light? Thanks in advance Uma [EMAIL PROTECTED] |
- List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
