If you had said this at the start, and posted the debug log, you
would have solved the problem a long time ago.
This is even in the FAQ:
http://wiki.freeradius.org/FAQ#The_NAS_seems_to_ignore_the_reply_of_the_radius_server
Alan DeKok.
would have solved the problem a long time ago.
This is even in the FAQ:
http://wiki.freeradius.org/FAQ#The_NAS_seems_to_ignore_the_reply_of_the_radius_server
Alan DeKok.
Alan,
As you said, I tried with the option -i :
radiusd --i <ip_address_radius server> -X
But still i get the below error message at the radius server end, only one NIC is active now on the server.
--- Walking the entire request list ---
Waking up in 6 seconds...
rad_recv: Access-Request packet from host 192.168.0.1:4754 , id=119,
length=151
Sending duplicate reply to client dlink:4754 - ID: 119
Re-sending Access-Accept of id 219 to 192.168.0.1 port 4754
On the client side MSVPN dialer interface, i see the error message: "Error 718: the connection was terminated becasue the remote computer didnt respond in timely manner".
Thanks for your patience and co-operation.
- List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
