It still gives the same problem. Do i need to make some changes in eap.conf ? What are the minimal changes required for using Freeradius for PEAP authentication ?
Following is the response that i am getting : rad_recv: Access-Request packet from host 10.129.20.111:3591, id=0, length=169 Message-Authenticator = 0xfe4a60518e04b51d6b38d7fedf1aaea0 Service-Type = Framed-User User-Name = "steve" Framed-MTU = 1488 Called-Station-Id = "00-18-F8-64-80-D9:ANUJ" Calling-Station-Id = "00-17-9A-D1-9F-B7" NAS-Port-Type = Wireless-802.11 Connect-Info = "CONNECT 54Mbps 802.11g" EAP-Message = 0x0200000a017374657665 NAS-IP-Address = 10.129.20.111 NAS-Port = 9 NAS-Port-Id = "STA port # 9" rlm_eap_md5: Issuing Challenge Sending Access-Challenge of id 0 to 10.129.20.111 port 3591 Service-Type = Framed-User Framed-Protocol = PPP EAP-Message = 0x01010016041033d59fe0ac35054f1a2955533d1e3e9a Message-Authenticator = 0x00000000000000000000000000000000 State = 0x76a720bea474bc7d81c3b354d59c6153 rad_recv: Access-Request packet from host 10.129.20.111:3591, id=1, length=183 Message-Authenticator = 0x4ddde4cd8366b803d83f50b4a49b3848 Service-Type = Framed-User User-Name = "steve" Framed-MTU = 1488 State = 0x76a720bea474bc7d81c3b354d59c6153 Called-Station-Id = "00-18-F8-64-80-D9:ANUJ" Calling-Station-Id = "00-17-9A-D1-9F-B7" NAS-Port-Type = Wireless-802.11 Connect-Info = "CONNECT 54Mbps 802.11g" EAP-Message = 0x020100060319 NAS-IP-Address = 10.129.20.111 NAS-Port = 9 NAS-Port-Id = "STA port # 9" Login incorrect: [steve/<no User-Password attribute>] (from client localhost port 9 cli 00-17-9A-D1-9F-B7) rad_recv: Access-Request packet from host 10.129.20.111:3591, id=1, length=183 Sending Access-Reject of id 1 to 10.129.20.111 port 3591 EAP-Message = 0x04010004 Message-Authenticator = 0x00000000000000000000000000000000 Password is visible no where. I am not getting any response from access-challenge it seems. Any ideas what cud be wrong ? -Anuj Alan DeKok wrote: > Anuj Tripathi wrote: > >> I am a newbie to freeradius. I am trying to use freeradius as an >> authentication server along with a WRT54G Linksys (Cisco) access point. >> >> On the client side i have a windows machine where i have enabled PEAP >> authentication, through which it asks me for user name and password. >> > ... > >> My Client file reads : >> >> steve Auth-Type := Local, User-Password == "testing" >> Service-Type = Framed-User, >> Framed-Protocol = PPP >> > > Don't set Auth-Type. > > >> Am I missing out on something ? Kindly help me with this as soon as >> possible. Its a little urgent. >> > > Use: > > steve User-Password := "testing" > > Or, if you're using 1.1.4: > > steve Cleartext-Password := "testing" > > > And nothing else. > > Alan DeKok. > -- > http://deployingradius.com - The web site of the book > http://deployingradius.com/blog/ - The blog > - > List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html > - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html