Dennis Skinner wrote:
> Andrew D wrote:
>
>> Basically, depending on the huntgroup I need to send different reply
>> attributes (different NAS types) and if the DB returns the group
>> suspend, different reply attributes are sent.
>
> I don't fully understand what you are trying to do and you snipped a lot
We are a little ISP, we have a bunch of lines on the local network, and
outsource our dsl and national lines. We have a patton here and cisco
NASes at the outsourced mob.
If a user dials into the patton then they get a basic setup of
framed-user session-timeout etc. if they come in via the cisco then
they get same basic setup as the patton + a bunch of cisco-avpairs.
If however they are in the 'suspend' group and they dial into the patton
then they get a 172.16.* ip or if they dial into the ciscos, they get a
different set of cisco-avpairs.
> of the debug log, but if the group is in sql, then the huntgroup file
full debug :)
Starting - reading configuration files ...
reread_config: reading radiusd.conf
Config: including file: /usr/local/etc/raddb/proxy.conf
Config: including file: /usr/local/etc/raddb/clients.conf
Config: including file: /usr/local/etc/raddb/snmp.conf
Config: including file: /usr/local/etc/raddb/eap.conf
Config: including file: /usr/local/etc/raddb/sql.conf
main: prefix = "/usr/local"
main: localstatedir = "/var"
main: logdir = "/var/log"
main: libdir = "/usr/local/lib"
main: radacctdir = "/var/log/radacct"
main: hostname_lookups = no
main: max_request_time = 30
main: cleanup_delay = 5
main: max_requests = 1024
main: delete_blocked_requests = 0
main: port = 0
main: allow_core_dumps = no
main: log_stripped_names = no
main: log_file = "/var/log/radius.log"
main: log_auth = yes
main: log_auth_badpass = yes
main: log_auth_goodpass = no
main: pidfile = "/var/run/radiusd/radiusd.pid"
main: user = "nobody"
main: group = "nobody"
main: usercollide = no
main: lower_user = "after"
main: lower_pass = "after"
main: nospace_user = "after"
main: nospace_pass = "after"
main: checkrad = "/usr/local/sbin/checkrad"
main: proxy_requests = no
proxy: retry_delay = 5
proxy: retry_count = 3
proxy: synchronous = no
proxy: default_fallback = yes
proxy: dead_time = 120
proxy: post_proxy_authorize = no
proxy: wake_all_if_all_dead = no
security: max_attributes = 200
security: reject_delay = 0
security: status_server = no
main: debug_level = 0
read_config_files: reading dictionary
read_config_files: reading naslist
read_config_files: reading clients
read_config_files: reading realms
Using deprecated realms file. Support for this will go away soon.
radiusd: entering modules setup
Module: Library search path is /usr/local/lib
Module: Loaded exec
exec: wait = yes
exec: program = "(null)"
exec: input_pairs = "request"
exec: output_pairs = "(null)"
exec: packet_type = "(null)"
rlm_exec: Wait=yes but no output defined. Did you mean output=none?
Module: Instantiated exec (exec)
Module: Loaded expr
Module: Instantiated expr (expr)
Module: Loaded PAP
pap: encryption_scheme = "crypt"
Module: Instantiated pap (pap)
Module: Loaded CHAP
Module: Instantiated chap (chap)
Module: Loaded MS-CHAP
mschap: use_mppe = yes
mschap: require_encryption = no
mschap: require_strong = no
mschap: with_ntdomain_hack = no
mschap: passwd = "(null)"
mschap: ntlm_auth = "(null)"
Module: Instantiated mschap (mschap)
Module: Loaded eap
eap: default_eap_type = "md5"
eap: timer_expire = 60
eap: ignore_unknown_eap_types = no
eap: cisco_accounting_username_bug = no
rlm_eap: Loaded and initialized type md5
rlm_eap: Loaded and initialized type leap
gtc: challenge = "Password: "
gtc: auth_type = "PAP"
rlm_eap: Loaded and initialized type gtc
mschapv2: with_ntdomain_hack = no
rlm_eap: Loaded and initialized type mschapv2
Module: Instantiated eap (eap)
Module: Loaded preprocess
preprocess: huntgroups = "/usr/local/etc/raddb/huntgroups"
preprocess: hints = "/usr/local/etc/raddb/hints"
preprocess: with_ascend_hack = no
preprocess: ascend_channels_per_line = 23
preprocess: with_ntdomain_hack = no
preprocess: with_specialix_jetstream_hack = no
preprocess: with_cisco_vsa_hack = no
preprocess: with_alvarion_vsa_hack = no
Module: Instantiated preprocess (preprocess)
Module: Loaded realm
realm: format = "suffix"
realm: delimiter = "@"
realm: ignore_default = no
realm: ignore_null = no
Module: Instantiated realm (suffix)
Module: Loaded SQL
sql: driver = "rlm_sql_mysql"
sql: server = "localhost"
sql: port = ""
sql: login = "root"
sql: password = ""
sql: radius_db = "radius"
sql: nas_table = "nas"
sql: sqltrace = no
sql: sqltracefile = "/var/log/sqltrace.sql"
sql: readclients = no
sql: deletestalesessions = yes
sql: num_sql_socks = 5
sql: sql_user_name = "%{User-Name}"
sql: default_user_profile = ""
sql: query_on_not_found = no
sql: authorize_check_query = "SELECT id, UserName, Attribute, Value,
op FROM radcheck WHERE Username = '%{SQL-User-Name}'
ORDER BY id"
sql: authorize_reply_query = "SELECT id, UserName, Attribute, Value,
op FROM radreply WHERE Username = '%{SQL-User-Name}'
ORDER BY id"
sql: authorize_group_check_query = "SELECT
radgroupcheck.id,radgroupcheck.GroupName,radgroupcheck.Attribute,radgroupcheck.Value,radgroupcheck.op
FROM radgroupcheck,usergroup WHERE usergroup.Username =
'%{SQL-User-Name}' AND usergroup.GroupName = radgroupcheck.GroupName
ORDER BY radgroupcheck.id"
sql: authorize_group_reply_query = "SELECT
radgroupreply.id,radgroupreply.GroupName,radgroupreply.Attribute,radgroupreply.Value,radgroupreply.op
FROM radgroupreply,usergroup WHERE usergroup.Username =
'%{SQL-User-Name}' AND usergroup.GroupName = radgroupreply.GroupName
ORDER BY radgroupreply.id"
sql: accounting_onoff_query = "UPDATE radacct SET AcctStopTime='%S',
AcctSessionTime=unix_timestamp('%S') - unix_timestamp(AcctStartTime),
AcctTerminateCause='%{Acct-Terminate-Cause}', AcctStopDelay =
'%{Acct-Delay-Time}' WHERE AcctSessionTime=0 AND AcctStopTime=0 AND
NASIPAddress= '%{NAS-IP-Address}' AND AcctStartTime <= '%S'"
sql: accounting_update_query = "UPDATE radacct SET
FramedIPAddress = '%{Framed-IP-Address}', AcctSessionTime =
'%{Acct-Session-Time}', AcctInputOctets =
'%{Acct-Input-Octets}', AcctOutputOctets =
'%{Acct-Output-Octets}' WHERE AcctSessionId =
'%{Acct-Session-Id}' AND UserName = '%{SQL-User-Name}'
AND NASIPAddress= '%{NAS-IP-Address}'"
sql: accounting_update_query_alt = "INSERT into radacct
(AcctSessionId, AcctUniqueId, UserName, Realm, NASIPAddress, NASPortId,
NASPortType, AcctStartTime, AcctSessionTime, AcctAuthentic,
ConnectInfo_start, AcctInputOctets, AcctOutputOctets, CalledStationId,
CallingStationId, ServiceType, FramedProtocol, FramedIPAddress,
AcctStartDelay) values('%{Acct-Session-Id}',
'%{Acct-Unique-Session-Id}', '%{SQL-User-Name}', '%{Realm}',
'%{NAS-IP-Address}', '%{NAS-Port}', '%{NAS-Port-Type}',
DATE_SUB('%S',INTERVAL (%{Acct-Session-Time:-0} + %{Acct-Delay-Time:-0})
SECOND), '%{Acct-Session-Time}', '%{Acct-Authentic}', '',
'%{Acct-Input-Octets}', '%{Acct-Output-Octets}', '%{Called-Station-Id}',
'%{Calling-Station-Id}', '%{Service-Type}', '%{Framed-Protocol}',
'%{Framed-IP-Address}', '0')"
sql: accounting_start_query = "INSERT into radacct (AcctSessionId,
AcctUniqueId, UserName, Realm, NASIPAddress, NASPortId, NASPortType,
AcctStartTime, AcctStopTime, AcctSessionTime, AcctAuthentic,
ConnectInfo_start, ConnectInfo_stop, AcctInputOctets, AcctOutputOctets,
CalledStationId, CallingStationId, AcctTerminateCause, ServiceType,
FramedProtocol, FramedIPAddress, AcctStartDelay, AcctStopDelay)
values('%{Acct-Session-Id}', '%{Acct-Unique-Session-Id}',
'%{SQL-User-Name}', '%{Realm}', '%{NAS-IP-Address}', '%{NAS-Port}',
'%{NAS-Port-Type}', '%S', '0', '0', '%{Acct-Authentic}',
'%{Connect-Info}', '', '0', '0', '%{Called-Station-Id}',
'%{Calling-Station-Id}', '', '%{Service-Type}', '%{Framed-Protocol}',
'%{Framed-IP-Address}', '%{Acct-Delay-Time}', '0')"
sql: accounting_start_query_alt = "UPDATE radacct SET AcctStartTime =
'%S', AcctStartDelay = '%{Acct-Delay-Time}', ConnectInfo_start =
'%{Connect-Info}' WHERE AcctSessionId = '%{Acct-Session-Id}' AND
UserName = '%{SQL-User-Name}' AND NASIPAddress = '%{NAS-IP-Address}'"
sql: accounting_stop_query = "UPDATE radacct SET AcctStopTime = '%S',
AcctSessionTime = '%{Acct-Session-Time}', AcctInputOctets =
'%{Acct-Input-Octets}', AcctOutputOctets = '%{Acct-Output-Octets}',
AcctTerminateCause = '%{Acct-Terminate-Cause}', AcctStopDelay =
'%{Acct-Delay-Time}', ConnectInfo_stop = '%{Connect-Info}' WHERE
AcctSessionId = '%{Acct-Session-Id}' AND UserName = '%{SQL-User-Name}'
AND NASIPAddress = '%{NAS-IP-Address}'"
sql: accounting_stop_query_alt = "INSERT into radacct (AcctSessionId,
AcctUniqueId, UserName, Realm, NASIPAddress, NASPortId, NASPortType,
AcctStartTime, AcctStopTime, AcctSessionTime, AcctAuthentic,
ConnectInfo_start, ConnectInfo_stop, AcctInputOctets, AcctOutputOctets,
CalledStationId, CallingStationId, AcctTerminateCause, ServiceType,
FramedProtocol, FramedIPAddress, AcctStartDelay, AcctStopDelay)
values('%{Acct-Session-Id}', '%{Acct-Unique-Session-Id}',
'%{SQL-User-Name}', '%{Realm}', '%{NAS-IP-Address}', '%{NAS-Port}',
'%{NAS-Port-Type}', DATE_SUB('%S', INTERVAL (%{Acct-Session-Time:-0} +
%{Acct-Delay-Time:-0}) SECOND), '%S', '%{Acct-Session-Time}',
'%{Acct-Authentic}', '', '%{Connect-Info}', '%{Acct-Input-Octets}',
'%{Acct-Output-Octets}', '%{Called-Station-Id}',
'%{Calling-Station-Id}', '%{Acct-Terminate-Cause}', '%{Service-Type}',
'%{Framed-Protocol}', '%{Framed-IP-Address}', '0', '%{Acct-Delay-Time}')"
sql: group_membership_query = "SELECT GroupName FROM usergroup WHERE
UserName='%{SQL-User-Name}'"
sql: connect_failure_retry_delay = 30
sql: simul_count_query = ""
sql: simul_verify_query = "SELECT RadAcctId, AcctSessionId, UserName,
NASIPAddress, NASPortId, FramedIPAddress, CallingStationId,
FramedProtocol FROM radacct WHERE UserName='%{SQL-User-Name}' AND
AcctStopTime = 0"
sql: postauth_query = "INSERT into radpostauth (id, user, pass, reply,
date) values ('', '%{User-Name}', '%{User-Password:-Chap-Password}',
'%{reply:Packet-Type} %{Module-Failure-Message}', NOW())"
sql: safe-characters =
"@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_: /"
rlm_sql (sql): Driver rlm_sql_mysql (module rlm_sql_mysql) loaded and linked
rlm_sql (sql): Attempting to connect to [EMAIL PROTECTED]:/radius
rlm_sql (sql): starting 0
rlm_sql (sql): Attempting to connect rlm_sql_mysql #0
rlm_sql_mysql: Starting connect to MySQL server for #0
rlm_sql (sql): Connected new DB handle, #0
rlm_sql (sql): starting 1
rlm_sql (sql): Attempting to connect rlm_sql_mysql #1
rlm_sql_mysql: Starting connect to MySQL server for #1
rlm_sql (sql): Connected new DB handle, #1
rlm_sql (sql): starting 2
rlm_sql (sql): Attempting to connect rlm_sql_mysql #2
rlm_sql_mysql: Starting connect to MySQL server for #2
rlm_sql (sql): Connected new DB handle, #2
rlm_sql (sql): starting 3
rlm_sql (sql): Attempting to connect rlm_sql_mysql #3
rlm_sql_mysql: Starting connect to MySQL server for #3
rlm_sql (sql): Connected new DB handle, #3
rlm_sql (sql): starting 4
rlm_sql (sql): Attempting to connect rlm_sql_mysql #4
rlm_sql_mysql: Starting connect to MySQL server for #4
rlm_sql (sql): Connected new DB handle, #4
Module: Instantiated sql (sql)
Module: Loaded files
files: usersfile = "/usr/local/etc/raddb/users"
files: acctusersfile = "/usr/local/etc/raddb/acct_users"
files: preproxy_usersfile = "/usr/local/etc/raddb/preproxy_users"
files: compat = "no"
Module: Instantiated files (files)
Module: Loaded Acct-Unique-Session-Id
acct_unique: key = "User-Name, Acct-Session-Id, NAS-IP-Address,
Client-IP-Address, NAS-Port"
Module: Instantiated acct_unique (acct_unique)
Module: Loaded detail
detail: detailfile = "/var/log/radacct/%{Client-IP-Address}/detail-%Y%m%d"
detail: detailperm = 384
detail: dirperm = 493
detail: locking = no
Module: Instantiated detail (detail)
Module: Loaded radutmp
radutmp: filename = "/var/log/radutmp"
radutmp: username = "%{User-Name}"
radutmp: case_sensitive = yes
radutmp: check_with_nas = yes
radutmp: perm = 384
radutmp: callerid = yes
Module: Instantiated radutmp (radutmp)
Listening on authentication *:1812
Listening on accounting *:1813
Ready to process requests.
rad_recv: Access-Request packet from host 192.168.202.99:1066, id=0,
length=111
User-Name = "awd"
CHAP-Password = 0x4353f490bdd471db230b3a798e4cdc98ec
NAS-Port = 8
NAS-Port-Type = Async
NAS-Identifier = ""Patton2960""
Called-Station-Id = ""81122000""
Calling-Station-Id = ""unknown""
Framed-Protocol = PPP
Service-Type = Framed-User
NAS-IP-Address = 203.57.204.190
Processing the authorize section of radiusd.conf
modcall: entering group authorize for request 0
modcall[authorize]: module "preprocess" returns ok for request 0
rlm_chap: Setting 'Auth-Type := CHAP'
modcall[authorize]: module "chap" returns ok for request 0
modcall[authorize]: module "mschap" returns noop for request 0
rlm_realm: No '@' in User-Name = "awd", looking up realm NULL
rlm_realm: No such realm "NULL"
modcall[authorize]: module "suffix" returns noop for request 0
rlm_eap: No EAP-Message, not doing EAP
modcall[authorize]: module "eap" returns noop for request 0
radius_xlat: 'awd'
rlm_sql (sql): sql_set_user escaped user --> 'awd'
radius_xlat: 'SELECT id, UserName, Attribute, Value, op FROM
radcheck WHERE Username = 'awd' ORDER BY id'
rlm_sql (sql): Reserving sql socket id: 4
radius_xlat: 'SELECT
radgroupcheck.id,radgroupcheck.GroupName,radgroupcheck.Attribute,radgroupcheck.Value,radgroupcheck.op
FROM radgroupcheck,usergroup WHERE usergroup.Username = 'awd' AND
usergroup.GroupName = radgroupcheck.GroupName ORDER BY radgroupcheck.id'
radius_xlat: 'SELECT id, UserName, Attribute, Value, op FROM
radreply WHERE Username = 'awd' ORDER BY id'
radius_xlat: 'SELECT
radgroupreply.id,radgroupreply.GroupName,radgroupreply.Attribute,radgroupreply.Value,radgroupreply.op
FROM radgroupreply,usergroup WHERE usergroup.Username = 'awd' AND
usergroup.GroupName = radgroupreply.GroupName ORDER BY radgroupreply.id'
rlm_sql (sql): Released sql socket id: 4
modcall[authorize]: module "sql" returns ok for request 0
users: Matched entry DEFAULT at line 26
users: Matched entry DEFAULT at line 66
users: Matched entry DEFAULT at line 84
modcall[authorize]: module "files" returns ok for request 0
modcall: leaving group authorize (returns ok) for request 0
rad_check_password: Found Auth-Type CHAP
auth: type "CHAP"
Processing the authenticate section of radiusd.conf
modcall: entering group CHAP for request 0
rlm_chap: login attempt by "awd" with CHAP password
rlm_chap: Using clear text password start for user awd authentication.
rlm_chap: chap user awd authenticated succesfully
modcall[authenticate]: module "chap" returns ok for request 0
modcall: leaving group CHAP (returns ok) for request 0
Processing the session section of radiusd.conf
modcall: entering group session for request 0
radius_xlat: '/var/log/radutmp'
radius_xlat: 'awd'
modcall[session]: module "radutmp" returns ok for request 0
modcall: leaving group session (returns ok) for request 0
Login OK: [awd] (from client awd port 8 cli "unknown")
Sending Access-Accept of id 0 to 192.168.202.99 port 1066
Session-Timeout := 43200
Port-Limit := 1
Framed-MTU = 1476
Service-Type = Framed-User
Framed-Protocol = PPP
Framed-Compression = Van-Jacobson-TCP-IP
Finished request 0
Going to the next request
--- Walking the entire request list ---
Waking up in 6 seconds...
hungroups file
test NAS-IP-ADDRESS == 203.57.204.190
testbad NAS-IP-ADDRESS == 203.57.204.190
SQL-Group = suspend
users file
#
# This is a complete entry for "steve". Note that there is no Fall-Through
# entry so that no DEFAULT entry will be used, and the user will NOT
# get any attributes in addition to the ones listed here.
#
#awd Auth-Type := Local, User-Password == "blah"
# Fall-Through = Yes
DEFAULT Group == "suspend"
Framed-IP-Address := 172.16.32.0+,
Port-Limit := 1
DEFAULT Huntgroup-Name == "testbad"
Framed-IP-Address := 172.16.32.0+,
Port-Limit := 1
DEFAULT Huntgroup-Name == "test"
Port-Limit := 20,
Fall-Through = 1
> should look something like this:
>
> testbad NAS-IP-ADDRESS == some.ip
> SQL-Group = suspend
> ^^^^
>
> Hopefully that helps....
>
Sorry, that didn't work either :(
--
Network Administrator / Manager
Webzone Internet
1st Floor (Oakley Street Entrance)
167 Grote Street
Adelaide SA, 5000
Phone 1300 303 932
Fax 08 8221 6204
Email [EMAIL PROTECTED]
[EMAIL PROTECTED]
-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
