Ivan, Sorry to bother you again. Where should I apply the Crypt-Password? Should I apply it in radiusd.conf or in the ldap.attrmap file? What line were you referring to? My ldap database stores the password in userPassword field. I assume that I should keep password_attribute = userPassword in the radiusd.conf file, correct? Tim
At 04:51 PM 3/5/2007, you wrote: >Use Crypt-Password not User-Password. > >Ivan Kalik >Kalik Informatika ISP > > >Dana 5/3/2007, "Tim Tyler" <[EMAIL PROTECTED]> pi¹e: > > > Freeradius experts, > > I am trying to configure freeradius to use openldap as a backend > >for authentication, but I can't seem to get the passwords to > >authenticate. It seems to have no problem binding and finding the > >username (uid). I am using crypt passwords in the ldap userPassword field: > >userPassword:: e1NTSEF9aXBWQklEYnZYSU9RdWl2V0ZtdGR5MWxIWFFsZWVCMjQ= > > > > I am not using any radius attributes. I simply want to allow any > >uid to authenticate. I get these results: > > > >rad_recv: Access-Request packet from host > 144.89.40.8:59881, id=60, length=59 > > User-Name = "tylertj" > > User-Password = "xxxxxx" > > NAS-IP-Address = 255.255.255.255 > > NAS-Port = 1812 > >rlm_ldap: - authorize > >rlm_ldap: performing user authorization for tylertj > >rlm_ldap: ldap_get_conn: Checking Id: 0 > >rlm_ldap: ldap_get_conn: Got Id: 0 > >rlm_ldap: (re)connect to ldap.beloit.edu:389, authentication 0 > >rlm_ldap: setting TLS CACert File to /etc/openldap/cacerts/cacert.cer > >rlm_ldap: starting TLS > >rlm_ldap: bind as / to ldap.beloit.edu:389 > >rlm_ldap: waiting for bind result ... > >rlm_ldap: Bind was successful > >rlm_ldap: looking for check items in directory... > >rlm_ldap: looking for reply items in directory... > >rlm_ldap: user tylertj authorized to use remote access > >rlm_ldap: ldap_release_conn: Release Id: 0 > >rad_recv: Access-Request packet from host > 144.89.40.8:59881, id=60, length=59 > >Sending Access-Reject of id 60 to 144.89.40.8:59881 > > > > > > What might I be doing wrong? I presume that the ldap server > >doesn't have to store the passwords in plain text, correct? I can > >store them in md5 or SHA1 hash if I want, correct? I did uncomment: > > > >authenticate { > > Auth-Type LDAP { > > ldap > > } > > > > Am I wrong to think this is now a password issue? > >Tim > > > > > > > > > > > >Tim Tyler > >Network Engineer - Beloit College > >[EMAIL PROTECTED] > > > >- >List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html Tim Tyler Network Engineer - Beloit College [EMAIL PROTECTED] - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html