> -----Message d'origine----- > De : > [EMAIL PROTECTED] > radius.org > [mailto:[EMAIL PROTECTED] > sts.freeradius.org] De la part de peppeska > Envoyé : mercredi 21 mars 2007 18:36 > À : FreeRadius users mailing list > Objet : Re: RE : RE : RE : freeradius, ldap error - HELP ME! > > > -----BEGIN PGP SIGNED MESSAGE----- > Hash: SHA1 > > Ok!!! > Now I have this configuration > > > > INCLUDE /etc/radiusclient/dictionary.microsoft > INCLUDE /etc/radiusclient/dictionary.ascend > INCLUDE /etc/radiusclient/dictionary.compat > INCLUDE /etc/radiusclient/dictionary.merit > $INCLUDE /usr/share/freeradius/dictionary
Very Very Very Weird !!!! I'm curious about one thing: when you remove the last "$INCLUDE" line, does it work as described below ? I'm also wondering why only "INCLUDE" statement work unless the radiusclient code uses a hardoced "$INCLUDE" strncmp in dict.c !!!! Alan, I thought there was a plan to make the radiusclient hosted at freeradius.org so that It will benefit from Freeradius developpment: is it always a plan ? > And... (same roll of drumps) > > rad_recv: Access-Request packet from host 127.0.0.1:1028, > id=40, length=136 > Service-Type = Framed-User > Framed-Protocol = PPP > User-Name = "peppeska" > MS-CHAP-Challenge = 0x2b05b4344fc7309510ee443fac5c90bf > MS-CHAP2-Response = > 0x05006a01dac8d579188fab13d4f5b10524c2000000000000000074aba522 > 70d19850e5169d1e6410fe36c608d63ff061a401 > NAS-IP-Address = 127.0.0.1 > NAS-Port = 0 Better, > Sending Access-Accept of id 40 to 127.0.0.1 port 1028 > Framed-IP-Address = 255.255.255.254 > Framed-MTU = 576 > Service-Type = Framed-User > Framed-Protocol = PPP > Framed-Compression = Van-Jacobson-TCP-IP > MS-CHAP2-Success = > 0x05533d463841343638303834373332313835434433353945383639333946 > 36453234323633323333373143 > MS-MPPE-Recv-Key = 0xeb3b2b7a46dfff70bdee5eb89a755804 > MS-MPPE-Send-Key = 0xe0d003c9754115e0063f7f832015f1c6 > MS-MPPE-Encryption-Policy = 0x00000002 > MS-MPPE-Encryption-Types = 0x00000004 Ok, you're done with Freeradius. > Well! it work! or not? As far as Freeradius is concerned yes. > because.. this is the pppoe-server log > > debian:~# plog > Mar 21 18:33:54 debian pppd[4306]: sent [LCP TermAck id=0x2] > Mar 21 18:33:54 debian pppd[4306]: rcvd [LCP TermAck id=0x2] > Mar 21 18:33:54 debian pppd[4306]: Connection terminated. Mar > 21 18:33:54 debian pppd[4306]: Waiting for 1 child processes... > Mar 21 18:33:54 debian pppd[4306]: script /usr/sbin/pppoe -n -I eth1 > - -e 5:32:c8:93:a2:15:29 -T 60 -S '', pid 4307 > Mar 21 18:33:55 debian pppd[4306]: Script /usr/sbin/pppoe -n > -I eth1 -e 5:32:c8:93:a2:15:29 -T 60 -S '' finished (pid > 4307), status = 0x1 Mar 21 18:33:55 debian pppd[4306]: Exit. debian:~# > > > boh!!!!!! I realy don't now why... Just a question: who is suposed to assign the IP address: Freeradius in Framed-IP-Address Attribute or your pppoe server ? Regards, Thibault - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html