On Mon, 2007-04-02 at 08:40 +0000, Eshun Benjamin wrote: > The settings below will help: snip > > Make sure you have your client(AP) information in radius: client.conf > ( AP IP , MyWireless, Shared Key) > configure eap.conf and radius.conf as well. > > All the best.
Thanks, but I am still having some problems. I have the settings as you sent me, set up in the router. I have set both the radius secret on the radius section of the router setup and the WPA secret in the security section of the router as the same, namely: testing456. Now, I have this in my clients.conf: client 192.168.1.115/24 { nastype = other secret = testing456 shortname = dd-wrt } However, when I try to connect using this router, I get the following from the output of radiusd -X: Ready to process requests. rad_recv: Access-Request packet from host 192.168.3.115:3078, id=0, length=137 Received packet from 192.168.3.115 with invalid Message-Authenticator! (Shared secret is incorrect.) Dropping packet without response. Finished request 0 I am sure that I am doing something basic wrong, but I can't see it. Hopefully, some other eyes will spot the problem. Let me know if you need any more information. -- Ian Truelsen s/v Sting Email: [EMAIL PROTECTED] AIM: ihtruelsen MSN: [EMAIL PROTECTED] Google Talk: [EMAIL PROTECTED] - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html