Yes. Use NAS-IP-Address as check item. If you need a list of groups
and/or users/callerIDs/etc. that are allowed then use a huntgroup.

Ivan Kalik
Kalik Informatika ISP


Dana 26/4/2007, "Norman Zhang" <[EMAIL PROTECTED]> piše:

>Is there a way to set FreeRADIUS to authenticate against specific group
>of users for certain devices. For example,
>
>DEFAULT        Auth-Type = System
>       Fall-Through = Yes,
>       cisco-avpair = "shell:priv-lvl=1",
>       Service-Type = NAS-Prompt-User
>
>DEFAULT Group == router-rw
>       cisco-avpair := "shell:priv-lvl=15"
>
>DEFAULT Group == fw-admin
>       cisco-avpair := "shell:priv-lvl=15"
>
>Can I have the PIX to authenticate only against group fw-admin?
>
>Norman
>
>-
>List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
>
>

- 
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html

Reply via email to