Server setup (radiusd.conf) > pap: encryption_scheme = "crypt"
Password attribute > NT-Password from radiusd.conf: # PAP module to authenticate users based on their stored password # # As of 1.1.4, the "encryption_scheme" configuration should # no longer be used. For backwards compatibility, it will still # work as before, but we recommend that it is not used. Ivan Kalik Kalik Informatika ISP Dana 11/5/2007, "Stefan Winter" <[EMAIL PROTECTED]> piše: >Hi, > >still no joy: I've set up a brand new virtual test machine, installed FR-1.16 >from pristine sources, and did only the minimum required changes to the >config - diff of the whole raddb directory as is on the machine compared to >the shipped config below: > >diff -r raddb-shipped/radiusd.conf raddb/radiusd.conf >1859c1859 >< # sql >--- >> sql >diff -r raddb-shipped/sql.conf raddb/sql.conf >23c23 >< password = "rootpass" >--- >> password = "fixmeFR" >diff -r raddb-shipped/users raddb/users >153,154c153,154 >< DEFAULT Auth-Type = System >< Fall-Through = 1 >--- >> #DEFAULT Auth-Type = System >> # Fall-Through = 1 > >That's pretty minimal. > >DB content on the test machine is > >mysql> select * from radcheck; >+----+----------+-------------+----+----------------------------------+ >| id | UserName | Attribute | op | Value | >+----+----------+-------------+----+----------------------------------+ >| 1 | swinter | NT-Password | := | 0CB6948805F797BF2A82807973B89537 | >+----+----------+-------------+----+----------------------------------+ >1 row in set (0.00 sec) > >smbencrypt acknowledges that the value corresponds to the password "test". > >Still, with using > >./radtest swinter test localhost:1812 123 testing123 > >debug output doesn't authenticate the user. Debug output at the end of the >mail. > >Greetings, > >Stefan > >----- radiusd -X > ># ./radiusd -X >Starting - reading configuration files ... >reread_config: reading radiusd.conf >Config: including file: /etc/raddb/proxy.conf >Config: including file: /etc/raddb/clients.conf >Config: including file: /etc/raddb/snmp.conf >Config: including file: /etc/raddb/eap.conf >Config: including file: /etc/raddb/sql.conf > main: prefix = "/usr/local/freeradius-1.1.6" > main: localstatedir = "/usr/local/freeradius-1.1.6/var" > main: logdir = "/usr/local/freeradius-1.1.6/var/log/radius" > main: libdir = "/usr/local/freeradius-1.1.6/lib" > main: radacctdir = "/usr/local/freeradius-1.1.6/var/log/radius/radacct" > main: hostname_lookups = no > main: max_request_time = 30 > main: cleanup_delay = 5 > main: max_requests = 1024 > main: delete_blocked_requests = 0 > main: port = 0 > main: allow_core_dumps = no > main: log_stripped_names = no > main: log_file = "/usr/local/freeradius-1.1.6/var/log/radius/radius.log" > main: log_auth = no > main: log_auth_badpass = no > main: log_auth_goodpass = no > main: pidfile = "/usr/local/freeradius-1.1.6/var/run/radiusd/radiusd.pid" > main: user = "(null)" > main: group = "(null)" > main: usercollide = no > main: lower_user = "no" > main: lower_pass = "no" > main: nospace_user = "no" > main: nospace_pass = "no" > main: checkrad = "/usr/local/freeradius-1.1.6/sbin/checkrad" > main: proxy_requests = yes > proxy: retry_delay = 5 > proxy: retry_count = 3 > proxy: synchronous = no > proxy: default_fallback = yes > proxy: dead_time = 120 > proxy: post_proxy_authorize = no > proxy: wake_all_if_all_dead = no > security: max_attributes = 200 > security: reject_delay = 1 > security: status_server = no > main: debug_level = 0 >read_config_files: reading dictionary >read_config_files: reading naslist >Using deprecated naslist file. Support for this will go away soon. >read_config_files: reading clients >read_config_files: reading realms >radiusd: entering modules setup >Module: Library search path is /usr/local/freeradius-1.1.6/lib >Module: Loaded exec > exec: wait = yes > exec: program = "(null)" > exec: input_pairs = "request" > exec: output_pairs = "(null)" > exec: packet_type = "(null)" >rlm_exec: Wait=yes but no output defined. Did you mean output=none? >Module: Instantiated exec (exec) >Module: Loaded expr >Module: Instantiated expr (expr) >Module: Loaded PAP > pap: encryption_scheme = "crypt" > pap: auto_header = yes >Module: Instantiated pap (pap) >Module: Loaded CHAP >Module: Instantiated chap (chap) >Module: Loaded MS-CHAP > mschap: use_mppe = yes > mschap: require_encryption = no > mschap: require_strong = no > mschap: with_ntdomain_hack = no > mschap: passwd = "(null)" > mschap: ntlm_auth = "(null)" >Module: Instantiated mschap (mschap) >Module: Loaded System > unix: cache = no > unix: passwd = "(null)" > unix: shadow = "(null)" > unix: group = "(null)" > unix: radwtmp = "/usr/local/freeradius-1.1.6/var/log/radius/radwtmp" > unix: usegroup = no > unix: cache_reload = 600 >Module: Instantiated unix (unix) >Module: Loaded eap > eap: default_eap_type = "md5" > eap: timer_expire = 60 > eap: ignore_unknown_eap_types = no > eap: cisco_accounting_username_bug = no >rlm_eap: Loaded and initialized type md5 >rlm_eap: Loaded and initialized type leap > gtc: challenge = "Password: " > gtc: auth_type = "PAP" >rlm_eap: Loaded and initialized type gtc > mschapv2: with_ntdomain_hack = no >rlm_eap: Loaded and initialized type mschapv2 >Module: Instantiated eap (eap) >Module: Loaded preprocess > preprocess: huntgroups = "/etc/raddb/huntgroups" > preprocess: hints = "/etc/raddb/hints" > preprocess: with_ascend_hack = no > preprocess: ascend_channels_per_line = 23 > preprocess: with_ntdomain_hack = no > preprocess: with_specialix_jetstream_hack = no > preprocess: with_cisco_vsa_hack = no > preprocess: with_alvarion_vsa_hack = no >Module: Instantiated preprocess (preprocess) >Module: Loaded realm > realm: format = "suffix" > realm: delimiter = "@" > realm: ignore_default = no > realm: ignore_null = no >Module: Instantiated realm (suffix) >Module: Loaded files > files: usersfile = "/etc/raddb/users" > files: acctusersfile = "/etc/raddb/acct_users" > files: preproxy_usersfile = "/etc/raddb/preproxy_users" > files: compat = "no" >Module: Instantiated files (files) >Module: Loaded SQL > sql: driver = "rlm_sql_mysql" > sql: server = "localhost" > sql: port = "" > sql: login = "root" > sql: password = "fixmeFR" > sql: radius_db = "radius" > sql: nas_table = "nas" > sql: sqltrace = no > sql: sqltracefile = "/usr/local/freeradius-1.1.6/var/log/radius/sqltrace.sql" > sql: readclients = no > sql: deletestalesessions = yes > sql: num_sql_socks = 5 > sql: sql_user_name = "%{User-Name}" > sql: default_user_profile = "" > sql: query_on_not_found = no > sql: authorize_check_query = "SELECT id, UserName, Attribute, Value, op > FROM radcheck WHERE Username = '%{SQL-User-Name}' > ORDER BY id" > sql: authorize_reply_query = "SELECT id, UserName, Attribute, Value, op > FROM radreply WHERE Username = '%{SQL-User-Name}' > ORDER BY id" > sql: authorize_group_check_query = "SELECT > radgroupcheck.id,radgroupcheckGroupName,radgroupcheck.Attribute,radgroupcheck.Value,radgroupcheck.op > FROM radgroupcheck,usergroup WHERE usergroup.Username = '%{SQL-User-Name}' > AND usergroup.GroupName = radgroupcheck.GroupName ORDER BY radgroupcheck.id" > sql: authorize_group_reply_query = "SELECT > radgroupreply.id,radgroupreplyGroupName,radgroupreply.Attribute,radgroupreply.Value,radgroupreply.op > FROM radgroupreply,usergroup WHERE usergroup.Username = '%{SQL-User-Name}' > AND usergroup.GroupName = radgroupreply.GroupName ORDER BY radgroupreply.id" > sql: accounting_onoff_query = "UPDATE radacct SET AcctStopTime='%S', > AcctSessionTime=unix_timestamp('%S') - unix_timestamp(AcctStartTime), > AcctTerminateCause='%{Acct-Terminate-Cause}', AcctStopDelay = > '%{Acct-Delay-Time}' WHERE AcctSessionTime=0 AND AcctStopTime=0 AND > NASIPAddress= '%{NAS-IP-Address}' AND AcctStartTime <= '%S'" > sql: accounting_update_query = "UPDATE radacct SET FramedIPAddress > = '%{Framed-IP-Address}', AcctSessionTime = '%{Acct-Session-Time}', > AcctInputOctets = '%{Acct-Input-Octets}', > AcctOutputOctets = '%{Acct-Output-Octets}' WHERE AcctSessionId = > '%{Acct-Session-Id}' AND UserName = '%{SQL-User-Name}' > AND NASIPAddress= '%{NAS-IP-Address}'" > sql: accounting_update_query_alt = "INSERT into radacct (AcctSessionId, > AcctUniqueId, UserName, Realm, NASIPAddress, NASPortId, NASPortType, > AcctStartTime, AcctSessionTime, AcctAuthentic, ConnectInfo_start, > AcctInputOctets, AcctOutputOctets, CalledStationId, CallingStationId, > ServiceType, FramedProtocol, FramedIPAddress, AcctStartDelay) > values('%{Acct-Session-Id}', '%{Acct-Unique-Session-Id}', '%{SQL-User-Name}', > '%{Realm}', '%{NAS-IP-Address}', '%{NAS-Port}', '%{NAS-Port-Type}', > DATE_SUB('%S',INTERVAL (%{Acct-Session-Time:-0} + %{Acct-Delay-Time:-0}) > SECOND), '%{Acct-Session-Time}', '%{Acct-Authentic}', '', > '%{Acct-Input-Octets}', '%{Acct-Output-Octets}', '%{Called-Station-Id}', > '%{Calling-Station-Id}', '%{Service-Type}', '%{Framed-Protocol}', > '%{Framed-IP-Address}', '0')" > sql: accounting_start_query = "INSERT into radacct (AcctSessionId, > AcctUniqueId, UserName, Realm, NASIPAddress, NASPortId, NASPortType, > AcctStartTime, AcctStopTime, AcctSessionTime, AcctAuthentic, > ConnectInfo_start, ConnectInfo_stop, AcctInputOctets, AcctOutputOctets, > CalledStationId, CallingStationId, AcctTerminateCause, ServiceType, > FramedProtocol, FramedIPAddress, AcctStartDelay, AcctStopDelay) > values('%{Acct-Session-Id}', '%{Acct-Unique-Session-Id}', '%{SQL-User-Name}', > '%{Realm}', '%{NAS-IP-Address}', '%{NAS-Port}', '%{NAS-Port-Type}', '%S', > '0', '0', '%{Acct-Authentic}', '%{Connect-Info}', '', '0', '0', > '%{Called-Station-Id}', '%{Calling-Station-Id}', '', '%{Service-Type}', > '%{Framed-Protocol}', '%{Framed-IP-Address}', '%{Acct-Delay-Time}', '0')" > sql: accounting_start_query_alt = "UPDATE radacct SET AcctStartTime = '%S', > AcctStartDelay = '%{Acct-Delay-Time}', ConnectInfo_start = '%{Connect-Info}' > WHERE AcctSessionId = '%{Acct-Session-Id}' AND UserName = '%{SQL-User-Name}' > AND NASIPAddress = '%{NAS-IP-Address}'" > sql: accounting_stop_query = "UPDATE radacct SET AcctStopTime = '%S', > AcctSessionTime = '%{Acct-Session-Time}', AcctInputOctets = > '%{Acct-Input-Octets}', AcctOutputOctets = '%{Acct-Output-Octets}', > AcctTerminateCause = '%{Acct-Terminate-Cause}', AcctStopDelay = > '%{Acct-Delay-Time}', ConnectInfo_stop = '%{Connect-Info}' WHERE > AcctSessionId = '%{Acct-Session-Id}' AND UserName = '%{SQL-User-Name}' AND > NASIPAddress = '%{NAS-IP-Address}'" > sql: accounting_stop_query_alt = "INSERT into radacct (AcctSessionId, > AcctUniqueId, UserName, Realm, NASIPAddress, NASPortId, NASPortType, > AcctStartTime, AcctStopTime, AcctSessionTime, AcctAuthentic, > ConnectInfo_start, ConnectInfo_stop, AcctInputOctets, AcctOutputOctets, > CalledStationId, CallingStationId, AcctTerminateCause, ServiceType, > FramedProtocol, FramedIPAddress, AcctStartDelay, AcctStopDelay) > values('%{Acct-Session-Id}', '%{Acct-Unique-Session-Id}', '%{SQL-User-Name}', > '%{Realm}', '%{NAS-IP-Address}', '%{NAS-Port}', '%{NAS-Port-Type}', > DATE_SUB('%S', INTERVAL (%{Acct-Session-Time:-0} + %{Acct-Delay-Time:-0}) > SECOND), '%S', '%{Acct-Session-Time}', '%{Acct-Authentic}', '', > '%{Connect-Info}', '%{Acct-Input-Octets}', '%{Acct-Output-Octets}', > '%{Called-Station-Id}', '%{Calling-Station-Id}', '%{Acct-Terminate-Cause}', > '%{Service-Type}', '%{Framed-Protocol}', '%{Framed-IP-Address}', '0', > '%{Acct-Delay-Time}')" > sql: group_membership_query = "SELECT GroupName FROM usergroup WHERE > UserName='%{SQL-User-Name}'" > sql: connect_failure_retry_delay = 60 > sql: simul_count_query = "" > sql: simul_verify_query = "SELECT RadAcctId, AcctSessionId, UserName, > NASIPAddress, NASPortId, FramedIPAddress, CallingStationId, FramedProtocol > FROM radacct WHERE UserName='%{SQL-User-Name}' AND AcctStopTime = 0" > sql: postauth_query = "INSERT into radpostauth (id, user, pass, reply, date) > values ('', '%{User-Name}', '%{User-Password:-Chap-Password}', > '%{reply:Packet-Type}', NOW())" > sql: safe-characters = > "@abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ0123456789.-_: /" >rlm_sql (sql): Driver rlm_sql_mysql (module rlm_sql_mysql) loaded and linked >rlm_sql (sql): Attempting to connect to [EMAIL PROTECTED]:/radius >rlm_sql (sql): starting 0 >rlm_sql (sql): Attempting to connect rlm_sql_mysql #0 >rlm_sql_mysql: Starting connect to MySQL server for #0 >rlm_sql (sql): Connected new DB handle, #0 >rlm_sql (sql): starting 1 >rlm_sql (sql): Attempting to connect rlm_sql_mysql #1 >rlm_sql_mysql: Starting connect to MySQL server for #1 >rlm_sql (sql): Connected new DB handle, #1 >rlm_sql (sql): starting 2 >rlm_sql (sql): Attempting to connect rlm_sql_mysql #2 >rlm_sql_mysql: Starting connect to MySQL server for #2 >rlm_sql (sql): Connected new DB handle, #2 >rlm_sql (sql): starting 3 >rlm_sql (sql): Attempting to connect rlm_sql_mysql #3 >rlm_sql_mysql: Starting connect to MySQL server for #3 >rlm_sql (sql): Connected new DB handle, #3 >rlm_sql (sql): starting 4 >rlm_sql (sql): Attempting to connect rlm_sql_mysql #4 >rlm_sql_mysql: Starting connect to MySQL server for #4 >rlm_sql (sql): Connected new DB handle, #4 >Module: Instantiated sql (sql) >Module: Loaded Acct-Unique-Session-Id > acct_unique: key = "User-Name, Acct-Session-Id, NAS-IP-Address, > Client-IP-Address, NAS-Port" >Module: Instantiated acct_unique (acct_unique) >Module: Loaded detail > detail: detailfile = > "/usr/local/freeradius-1.1.6/var/log/radius/radacct/%{Client-IP-Address}/detail-%Y%m%d" > detail: detailperm = 384 > detail: dirperm = 493 > detail: locking = no >Module: Instantiated detail (detail) >Module: Loaded radutmp > radutmp: filename = "/usr/local/freeradius-1.1.6/var/log/radius/radutmp" > radutmp: username = "%{User-Name}" > radutmp: case_sensitive = yes > radutmp: check_with_nas = yes > radutmp: perm = 384 > radutmp: callerid = yes >Module: Instantiated radutmp (radutmp) >Listening on authentication *:1812 >Listening on accounting *:1813 >Ready to process requests. >rad_recv: Access-Request packet from host 127.0.0.1:1024, id=209, length=59 > User-Name = "swinter" > User-Password = "test" > NAS-IP-Address = 255.255.255.255 > NAS-Port = 123 > Processing the authorize section of radiusd.conf >modcall: entering group authorize for request 0 > modcall[authorize]: module "preprocess" returns ok for request 0 > modcall[authorize]: module "chap" returns noop for request 0 > modcall[authorize]: module "mschap" returns noop for request 0 > rlm_realm: No '@' in User-Name = "swinter", looking up realm NULL > rlm_realm: No such realm "NULL" > modcall[authorize]: module "suffix" returns noop for request 0 > rlm_eap: No EAP-Message, not doing EAP > modcall[authorize]: module "eap" returns noop for request 0 > modcall[authorize]: module "files" returns notfound for request 0 >radius_xlat: 'swinter' >rlm_sql (sql): sql_set_user escaped user --> 'swinter' >radius_xlat: 'SELECT id, UserName, Attribute, Value, op FROM >radcheck WHERE Username = 'swinter' ORDER BY id' >rlm_sql (sql): Reserving sql socket id: 4 >radius_xlat: 'SELECT >radgroupcheck.id,radgroupcheck.GroupName,radgroupcheckAttribute,radgroupcheck.Value,radgroupcheck.op > FROM radgroupcheck,usergroup WHERE usergroup.Username = 'swinter' AND >usergroup.GroupName = radgroupcheck.GroupName ORDER BY radgroupcheck.id' >radius_xlat: 'SELECT id, UserName, Attribute, Value, op FROM >radreply WHERE Username = 'swinter' ORDER BY id' >radius_xlat: 'SELECT >radgroupreply.id,radgroupreply.GroupName,radgroupreplyAttribute,radgroupreply.Value,radgroupreply.op > FROM radgroupreply,usergroup WHERE usergroup.Username = 'swinter' AND >usergroup.GroupName = radgroupreply.GroupName ORDER BY radgroupreply.id' >rlm_sql (sql): Released sql socket id: 4 > modcall[authorize]: module "sql" returns ok for request 0 >rlm_pap: Normalizing NT-Password from hex encoding > modcall[authorize]: module "pap" returns updated for request 0 >modcall: leaving group authorize (returns updated) for request 0 > rad_check_password: Found Auth-Type pap >auth: type "PAP" > Processing the authenticate section of radiusd.conf >modcall: entering group PAP for request 0 >rlm_pap: login attempt with password test >rlm_pap: Using NT encryption. >radius_xlat: Running registered xlat function of module mschap for string >'NT-Hash test' > rlm_mschap: Unknown expansion string "NT-Hash test" >radius_xlat: '' >rlm_pap: mschap xlat failed >rlm_pap: Passwords don't match > modcall[authenticate]: module "pap" returns reject for request 0 >modcall: leaving group PAP (returns reject) for request 0 >auth: Failed to validate the user. >Delaying request 0 for 1 seconds >Finished request 0 >Going to the next request >--- Walking the entire request list --- >Waking up in 1 seconds... >--- Walking the entire request list --- >Waking up in 1 seconds... >--- Walking the entire request list --- >Sending Access-Reject of id 209 to 127.0.0.1 port 1024 >Waking up in 4 seconds... >--- Walking the entire request list --- >Cleaning up request 0 ID 209 with timestamp 464429d1 >Nothing to do. Sleeping until we see a request. > > >-- >Stefan WINTER > >Stiftung RESTENA - RĂŠseau TĂŠlĂŠinformatique de l'Education Nationale et de >la Recherche >Ingenieur Forschung & Entwicklung > >6, rue Richard Coudenhove-Kalergi >L-1359 Luxembourg >E-Mail: [EMAIL PROTECTED]   Tel.:   +352 424409-1 >http://www.restena.lu        Fax:    +352 422473 > > - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html