You are not sending any reply attributes to the NAS. Your client probably needs things like Framed-IP-Address etc. from it. Or do you have DHCP on the NAS? But I would expect Framed-IP-Address to be in the request then.
Ivan Kalik Kalik Informatika ISP Dana 21/5/2007, "Wolfgang Rosenauer" <[EMAIL PROTECTED]> piše: >Hugh Messenger wrote: >> Wolfgang Rosenauer <[EMAIL PROTECTED]> said: >>> I ran radiusd -X and saw that freeradius sent an Access-Accept reply to >>> the NAS' ip address and source port. >> >> Could you post the entire -X log for an example request? > >rad_recv: Access-Request packet from host 1.1.1.7:1645, id=166, length=97 > NAS-IP-Address = 1.1.1.1 > NAS-Port = 20010 > NAS-Port-Type = ISDN > User-Name = "XXXXX" > Called-Station-Id = "48793" > Calling-Station-Id = "123456" > User-Password = "XXXXX" > Service-Type = Framed-User > Framed-Protocol = PPP > > Processing the authorize section of radiusd.conf >modcall: entering group authorize for request 0 > modcall[authorize]: module "preprocess" returns ok for request 0 > modcall[authorize]: module "chap" returns noop for request 0 > modcall[authorize]: module "mschap" returns noop for request 0 > rlm_realm: No '@' in User-Name = "XXXXX", looking up realm NULL > rlm_realm: No such realm "NULL" > modcall[authorize]: module "suffix" returns noop for request 0 >radius_xlat: 'XXXXX' >rlm_sql (sql): sql_set_user escaped user --> 'XXXXX' >radius_xlat: 'SELECT id, UserName, Attribute, Value, op FROM >radcheck WHERE Username = 'XXXXX' ORDER BY id' >rlm_sql (sql): Reserving sql socket id: 4 >radius_xlat: 'SELECT >radgroupcheck.id,radgroupcheck.GroupName,radgroupcheck.Attribute,radgroupcheck.Val >ue,radgroupcheck.op FROM radgroupcheck,usergroup WHERE >usergroup.Username = 'XXXXX' AND usergroup.Gr >oupName = radgroupcheck.GroupName ORDER BY radgroupcheck.id' >radius_xlat: 'SELECT id, UserName, Attribute, Value, op FROM >radreply WHERE Usernam >e = 'XXXXX' ORDER BY id' >radius_xlat: 'SELECT >radgroupreply.id,radgroupreply.GroupName,radgroupreply.Attribute,radgroupreply.Val >ue,radgroupreply.op FROM radgroupreply,usergroup WHERE >usergroup.Username = 'XXXXX' AND usergroup.Gr >oupName = radgroupreply.GroupName ORDER BY radgroupreply.id' >rlm_sql (sql): Released sql socket id: 4 > modcall[authorize]: module "sql" returns ok for request 0 > modcall[authorize]: module "pap" returns updated for request 0 >modcall: leaving group authorize (returns updated) for request 0 > rad_check_password: Found Auth-Type pap >auth: type "PAP" > Processing the authenticate section of radiusd.conf >modcall: entering group PAP for request 0 >rlm_pap: login attempt with password XXXXX >rlm_pap: Using CRYPT encryption. >rlm_pap: User authenticated successfully > modcall[authenticate]: module "pap" returns ok for request 0 >modcall: leaving group PAP (returns ok) for request 0 >Sending Access-Accept of id 166 to 1.1.1.7 port 1645 >Finished request 0 > > > >Wolfgang >- >List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html > > - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
