Thanks so much. It makes a perfect sense. I now understand that the NAS (that the user has been connected on) will be pulled out of MySQL with simul_verify_query and checked against of that NAS, not the one that a user is trying to connect through.
>>There might be trouble with Cisco clients as the OID in checkrad is a bit dated. Can you explain a little more. We do have 2 Cisco. Checkrad itself works fine, I can see it in checkrad.log Thank you again. Irina ============ ----- Original Message ----- From: <[EMAIL PROTECTED]> To: "FreeRadius users mailing list" <[email protected]> Sent: Tuesday, June 12, 2007 5:21 PM Subject: Re: To check Simultaneous against 2 NASes > >Checked in sql.conf, there are 2 queries for Simultaneous: "simul_count_query" and "simul_verify_query". Are they both needed to get Simultaneous working? > > No. If you set your nastype to "other" in clents.conf verify query > won't be used. > > >A question would be more about "simul_verify_query". Is it used for Simultaneous as well? > > Yes, if you specify nastype other than "other" (oh, dear; I am sure > this can be put better). Then that query will get parameters for > checkrad to query NAS about the existance of that session. > > >I therefore don't need to change anything in here, do I? > > No, you don't. It will all work fine with two clents as well. > > >The problem is we have 2 NASes. How can I check if a user is connected (or not connected) on NAS1 and NAS2? > > simul_count_query will get all open sessions. simul_verify_query will get > to what NAS and port those sessions are bound to. checkrad will then > query appropriate NAS for each session to check if it is still open. > > It will all work fine - as long as checkrad script works for you. There > might be trouble with Cisco clients as the OID in checkrad is a bit > dated. > > Ivan Kalik > Kalik Informatika ISP > > - > List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html > - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
