OK. So your client gets accepted. You will need to look at NAS logs to
see where the connection breaks. Radius is working fine.

Ivan Kalik
Kalik Informatika ISP


Dana 13/6/2007, "[EMAIL PROTECTED]" <[EMAIL PROTECTED]> piše:

>Here is the output from the debug screen... The authorization process as 
>below loops when I switch on the encryption. Without any encryption it 
>works quite perfect.
>
>Or is it 'not' possible to use mac authentication and WEP/WPA with 
>preshared key at the same time?
>
>*NoIdeaWhatHappens*
>
>- - - - - - - - - 
>
>Module: Instantiated detail (reply_log)
>Listening on authentication *:1812
>Listening on accounting *:1813
>Ready to process requests.
>rad_recv: Access-Request packet from host 172.19.0.11:1261, id=188, 
>length=73
>        User-Name = "00-19-d2-2a-61-50"
>        User-Password = 00-19-d2-2a-61-50"
>  Processing the authorize section of radiusd.conf
>modcall: entering group authorize for request 0
>  modcall[authorize]: module "preprocess" returns ok for request 0
>radius_xlat: 
>'../var/log/radius/radacct/172.19.0.11/auth-detail-20070613.log'
>rlm_detail: 
>.../var/log/radius/radacct/%{Client-IP-Address}/auth-detail-%Y%m%d.lo
>g expands to 
>.../var/log/radius/radacct/172.19.0.11/auth-detail-20070613.log
>  modcall[authorize]: module "auth_log" returns ok for request 0
>    rlm_realm: No '@' in User-Name = "00-19-d2-2a-61-50", looking up realm 
>NULL
>    rlm_realm: No such realm "NULL"
>  modcall[authorize]: module "suffix" returns noop for request 0
>    users: Matched entry 00-19-d2-2a-61-50 at line 3
>  modcall[authorize]: module "files" returns ok for request 0
>rlm_pap: Found existing Auth-Type, not changing it.
>  modcall[authorize]: module "pap" returns noop for request 0
>modcall: leaving group authorize (returns ok) for request 0
>  rad_check_password:  Found Auth-Type Accept
>  rad_check_password: Auth-Type = Accept, accepting the user
>Login OK: [00-19-d2-2a-61-50/00-19-d2-2a-61-50] (from client wlanedv port 
>0)
>  Processing the post-auth section of radiusd.conf
>modcall: entering group post-auth for request 0
>radius_xlat: 
>'../var/log/radius/radacct/172.19.0.11/reply-detail-20070613.log'
>rlm_detail: 
>.../var/log/radius/radacct/%{Client-IP-Address}/reply-detail-%Y%m%d.l
>og expands to 
>.../var/log/radius/radacct/172.19.0.11/reply-detail-20070613.log
>  modcall[post-auth]: module "reply_log" returns ok for request 0
>modcall: leaving group post-auth (returns ok) for request 0
>Sending Access-Accept of id 188 to 172.19.0.11 port 1261
>Finished request 0
>Going to the next request
>- - - - - - - -
>
>
>
>Wavin GmbH - Sitz der Gesellschaft: 49767 Twist - Registergericht: AG 
>Osnabrück Abt. B 120003 - Geschäftsführung: Jürgen Frei, Maarten Roef - 
>Vors.d. Aufsichtsrates: Henk ten Hove   

- 
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html

Reply via email to