Oh, I had "Default auth-type := pam" in users. I removed that line and get a much longer debug output when I try to connect with the xp machine to the wireless. radtest fails with this message "auth: No authenticate method (Auth-Type) configuration found for the request: Rejecting the user. I have a feeling something is wrong with my eap.conf, I have debug below, any input would be appreciated.
eap.conf eap { default_eap_type = peap timer_expire = 60 ignore_unknown_eap_types = no md5 { } gtc { auth_type = PAP } tls { private_key_password = testing123 private_key_file = ${dbdir}/certs/pem/server.pem certificate_file = ${dbdir}/certs/pem/server.pem CA_file = /etc/raddb/certs/pem/root.pem dh_file = ${raddbdir}/certs/dh random_file = /dev/urandom } ttls { default_eap_type = md5 } peap { default_eap_type = mschapv2 proxy_tunneled_request_as_eap = no } mschapv2 { } } users: DEFAULT Service-Type == Framed-User Framed-Protocol == PPP, Framed-Protocol = PPP, Framed-Compression = Van-Jacobson-TCP-IP rad_recv: Access-Request packet from host 10.1.22.10:2626, id=0, length=185 Message-Authenticator = 0x381988b4c12ff0f1e3fa2e7e018b8ae5 Service-Type = Framed-User User-Name = "cjarrett" Framed-MTU = 1488 Called-Station-Id = "00-0F-CB-FC-3E-5F:CJ Test" Calling-Station-Id = "00-0E-35-FF-2A-82" NAS-Identifier = "AP11G" NAS-Port-Type = Wireless-802.11 Connect-Info = "CONNECT 54Mbps 802.11g" EAP-Message = 0x0200000d01636a617272657474 NAS-IP-Address = 10.1.22.10 NAS-Port = 2 NAS-Port-Id = "STA port # 2" Processing the authorize section of radiusd.conf modcall: entering group authorize for request 0 modcall[authorize]: module "preprocess" returns ok for request 0 modcall[authorize]: module "chap" returns noop for request 0 modcall[authorize]: module "mschap" returns noop for request 0 rlm_realm: No '@' in User-Name = "cjarrett", looking up realm NULL rlm_realm: No such realm "NULL" modcall[authorize]: module "suffix" returns noop for request 0 rlm_eap: EAP packet type response id 0 length 13 rlm_eap: No EAP Start, assuming it's an on-going EAP conversation modcall[authorize]: module "eap" returns updated for request 0 users: Matched entry DEFAULT at line 176 modcall[authorize]: module "files" returns ok for request 0 modcall: leaving group authorize (returns updated) for request 0 rad_check_password: Found Auth-Type EAP auth: type "EAP" Processing the authenticate section of radiusd.conf modcall: entering group authenticate for request 0 rlm_eap: EAP Identity rlm_eap: processing type tls rlm_eap_tls: Initiate rlm_eap_tls: Start returned 1 modcall[authenticate]: module "eap" returns handled for request 0 modcall: leaving group authenticate (returns handled) for request 0 Sending Access-Challenge of id 0 to 10.1.22.10 port 2626 EAP-Message = 0x010100061920 Message-Authenticator = 0x00000000000000000000000000000000 State = 0x36ba98c6e90e487eb0cfe88fcb5d879a Finished request 0 Going to the next request --- Walking the entire request list --- Waking up in 6 seconds... rad_recv: Access-Request packet from host 10.1.22.10:2626, id=1, length=270 Message-Authenticator = 0x43e1cd5ba6e967f5717089de44e05384 Service-Type = Framed-User User-Name = "cjarrett" Framed-MTU = 1488 State = 0x36ba98c6e90e487eb0cfe88fcb5d879a Called-Station-Id = "00-0F-CB-FC-3E-5F:CJ Test" Calling-Station-Id = "00-0E-35-FF-2A-82" NAS-Identifier = "AP11G" NAS-Port-Type = Wireless-802.11 Connect-Info = "CONNECT 54Mbps 802.11g" EAP-Message = 0x0201005019800000004616030100410100003d03014676f85e6be1d378fdbdbe6213a94362bd4453b8699af3896b955781d14034be00001600040005000a000900640062000300060013001200630100 NAS-IP-Address = 10.1.22.10 NAS-Port = 2 NAS-Port-Id = "STA port # 2" Processing the authorize section of radiusd.conf modcall: entering group authorize for request 1 modcall[authorize]: module "preprocess" returns ok for request 1 modcall[authorize]: module "chap" returns noop for request 1 modcall[authorize]: module "mschap" returns noop for request 1 rlm_realm: No '@' in User-Name = "cjarrett", looking up realm NULL rlm_realm: No such realm "NULL" modcall[authorize]: module "suffix" returns noop for request 1 rlm_eap: EAP packet type response id 1 length 80 rlm_eap: No EAP Start, assuming it's an on-going EAP conversation modcall[authorize]: module "eap" returns updated for request 1 users: Matched entry DEFAULT at line 176 modcall[authorize]: module "files" returns ok for request 1 modcall: leaving group authorize (returns updated) for request 1 rad_check_password: Found Auth-Type EAP auth: type "EAP" Processing the authenticate section of radiusd.conf modcall: entering group authenticate for request 1 rlm_eap: Request found, released from the list rlm_eap: EAP/peap rlm_eap: processing type peap rlm_eap_peap: Authenticate rlm_eap_tls: processing TLS rlm_eap_tls: Length Included eaptls_verify returned 11 (other): before/accept initialization TLS_accept: before/accept initialization rlm_eap_tls: <<< TLS 1.0 Handshake [length 0041], ClientHello TLS_accept: SSLv3 read client hello A rlm_eap_tls: >>> TLS 1.0 Handshake [length 004a], ServerHello TLS_accept: SSLv3 write server hello A rlm_eap_tls: >>> TLS 1.0 Handshake [length 04f2], Certificate TLS_accept: SSLv3 write certificate A rlm_eap_tls: >>> TLS 1.0 Handshake [length 0004], ServerHelloDone TLS_accept: SSLv3 write server done A TLS_accept: SSLv3 flush data TLS_accept:error in SSLv3 read client certificate A rlm_eap: SSL error error:00000000:lib(0):func(0):reason(0) In SSL Handshake Phase In SSL Accept mode eaptls_process returned 13 rlm_eap_peap: EAPTLS_HANDLED modcall[authenticate]: module "eap" returns handled for request 1 modcall: leaving group authenticate (returns handled) for request 1 Sending Access-Challenge of id 1 to 10.1.22.10 port 2626 EAP-Message = 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 EAP-Message = 0x300c060355040813055465786173310f300d0603550407130641757374696e31133011060355040a130a49542046726565646f6d311e301c060355040313156a7573746963652e697466726565646f6d2e636f6d30819f300d06092a864886f70d010101050003818d00308189028181009e6c73fe997b3baf2228a324bbb2f80c3ffeab664c08c2894e57a3c38cb5fc8d7299f642c27381fecf697b41b086f496fccc8153a6ac97654b560c49dda4115a56c66ea4e024678a787eabcf507a4d46b811aa27740106137123510fe0959c5bd8e0260a418ef4d7252a90054aa4f60d800cbef287370213a413e90f73b7acef0203010001a3173015301306 EAP-Message = 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 EAP-Message = 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 EAP-Message = 0x8bcf453bc58cbc621f2c93bffa3c802435d0ef96af8f Message-Authenticator = 0x00000000000000000000000000000000 State = 0xdb7e976ee5b705e695f599c38b37c3ff Finished request 1 Going to the next request --- Walking the entire request list --- Waking up in 5 seconds... rad_recv: Access-Request packet from host 10.1.22.10:2626, id=2, length=196 Message-Authenticator = 0xfe7be571e4388b7f6070941972326855 Service-Type = Framed-User User-Name = "cjarrett" Framed-MTU = 1488 State = 0xdb7e976ee5b705e695f599c38b37c3ff Called-Station-Id = "00-0F-CB-FC-3E-5F:CJ Test" Calling-Station-Id = "00-0E-35-FF-2A-82" NAS-Identifier = "AP11G" NAS-Port-Type = Wireless-802.11 Connect-Info = "CONNECT 54Mbps 802.11g" EAP-Message = 0x020200061900 NAS-IP-Address = 10.1.22.10 NAS-Port = 2 NAS-Port-Id = "STA port # 2" Processing the authorize section of radiusd.conf modcall: entering group authorize for request 2 modcall[authorize]: module "preprocess" returns ok for request 2 modcall[authorize]: module "chap" returns noop for request 2 modcall[authorize]: module "mschap" returns noop for request 2 rlm_realm: No '@' in User-Name = "cjarrett", looking up realm NULL rlm_realm: No such realm "NULL" modcall[authorize]: module "suffix" returns noop for request 2 rlm_eap: EAP packet type response id 2 length 6 rlm_eap: No EAP Start, assuming it's an on-going EAP conversation modcall[authorize]: module "eap" returns updated for request 2 users: Matched entry DEFAULT at line 176 modcall[authorize]: module "files" returns ok for request 2 modcall: leaving group authorize (returns updated) for request 2 rad_check_password: Found Auth-Type EAP auth: type "EAP" Processing the authenticate section of radiusd.conf modcall: entering group authenticate for request 2 rlm_eap: Request found, released from the list rlm_eap: EAP/peap rlm_eap: processing type peap rlm_eap_peap: Authenticate rlm_eap_tls: processing TLS rlm_eap_tls: Received EAP-TLS ACK message rlm_eap_tls: ack handshake fragment handler eaptls_verify returned 1 eaptls_process returned 13 rlm_eap_peap: EAPTLS_HANDLED modcall[authenticate]: module "eap" returns handled for request 2 modcall: leaving group authenticate (returns handled) for request 2 Sending Access-Challenge of id 2 to 10.1.22.10 port 2626 EAP-Message = 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 EAP-Message = 0x730816c95730f262d998622fef7ab67085b11171fcf91eedc0c722978688b4d95cc733f75cc8129c379c68664c1d4b25f86f4bfe077e3f816874b5164236b79ad98f7f21bff654afa0f389c860452416030100040e000000 Message-Authenticator = 0x00000000000000000000000000000000 State = 0xa59e16e46b5a6ec02559580464dcdfc7 Finished request 2 Going to the next request Waking up in 5 seconds... rad_recv: Access-Request packet from host 10.1.22.10:2626, id=3, length=382 Message-Authenticator = 0x4fcb37f77d06f6b896b44d378446425a Service-Type = Framed-User User-Name = "cjarrett" Framed-MTU = 1488 State = 0xa59e16e46b5a6ec02559580464dcdfc7 Called-Station-Id = "00-0F-CB-FC-3E-5F:CJ Test" Calling-Station-Id = "00-0E-35-FF-2A-82" NAS-Identifier = "AP11G" NAS-Port-Type = Wireless-802.11 Connect-Info = "CONNECT 54Mbps 802.11g" EAP-Message = 0x020300c01980000000b61603010086100000820080035f438a01efd8ab7c7a294a61aa7e875d7f06a8b634a2a73a3ec20b5069ec4dc0137747833e1252a070c6a3ce81917fd9dd1b712aaccd042e95790c91f15f1dd2408872453cb91d824630458d5b1546a2c60bcaee1207ddc57472ffc6afe456a82c452e1b3efc2f786ed598851a0a86be44c9dd31ba87d5c21cba7ef7e30d3a1403010001011603010020b3d94931dfd1413c9c4cb7248eaa9bfa185de0ce13cda40c4b717e7ac0271ba8 NAS-IP-Address = 10.1.22.10 NAS-Port = 2 NAS-Port-Id = "STA port # 2" Processing the authorize section of radiusd.conf modcall: entering group authorize for request 3 modcall[authorize]: module "preprocess" returns ok for request 3 modcall[authorize]: module "chap" returns noop for request 3 modcall[authorize]: module "mschap" returns noop for request 3 rlm_realm: No '@' in User-Name = "cjarrett", looking up realm NULL rlm_realm: No such realm "NULL" modcall[authorize]: module "suffix" returns noop for request 3 rlm_eap: EAP packet type response id 3 length 192 rlm_eap: No EAP Start, assuming it's an on-going EAP conversation modcall[authorize]: module "eap" returns updated for request 3 users: Matched entry DEFAULT at line 176 modcall[authorize]: module "files" returns ok for request 3 modcall: leaving group authorize (returns updated) for request 3 rad_check_password: Found Auth-Type EAP auth: type "EAP" Processing the authenticate section of radiusd.conf modcall: entering group authenticate for request 3 rlm_eap: Request found, released from the list rlm_eap: EAP/peap rlm_eap: processing type peap rlm_eap_peap: Authenticate rlm_eap_tls: processing TLS rlm_eap_tls: Length Included eaptls_verify returned 11 rlm_eap_tls: <<< TLS 1.0 Handshake [length 0086], ClientKeyExchange TLS_accept: SSLv3 read client key exchange A rlm_eap_tls: <<< TLS 1.0 ChangeCipherSpec [length 0001] rlm_eap_tls: <<< TLS 1.0 Handshake [length 0010], Finished TLS_accept: SSLv3 read finished A rlm_eap_tls: >>> TLS 1.0 ChangeCipherSpec [length 0001] TLS_accept: SSLv3 write change cipher spec A rlm_eap_tls: >>> TLS 1.0 Handshake [length 0010], Finished TLS_accept: SSLv3 write finished A TLS_accept: SSLv3 flush data (other): SSL negotiation finished successfully rlm_eap: SSL error error:00000000:lib(0):func(0):reason(0) SSL Connection Established eaptls_process returned 13 rlm_eap_peap: EAPTLS_HANDLED modcall[authenticate]: module "eap" returns handled for request 3 modcall: leaving group authenticate (returns handled) for request 3 Sending Access-Challenge of id 3 to 10.1.22.10 port 2626 EAP-Message = 0x0104003119001403010001011603010020935e4cc86eaaa1072ebd4e4c8e29ec031c939675d0c8c4d896dd671395d3fa1f Message-Authenticator = 0x00000000000000000000000000000000 State = 0xd79c6820132ebef7cf1548ab25a93afa Finished request 3 Going to the next request Waking up in 5 seconds... rad_recv: Access-Request packet from host 10.1.22.10:2626, id=4, length=196 Message-Authenticator = 0x4064e5721fc1c83e994ee45dc66e4fb4 Service-Type = Framed-User User-Name = "cjarrett" Framed-MTU = 1488 State = 0xd79c6820132ebef7cf1548ab25a93afa Called-Station-Id = "00-0F-CB-FC-3E-5F:CJ Test" Calling-Station-Id = "00-0E-35-FF-2A-82" NAS-Identifier = "AP11G" NAS-Port-Type = Wireless-802.11 Connect-Info = "CONNECT 54Mbps 802.11g" EAP-Message = 0x020400061900 NAS-IP-Address = 10.1.22.10 NAS-Port = 2 NAS-Port-Id = "STA port # 2" Processing the authorize section of radiusd.conf modcall: entering group authorize for request 4 modcall[authorize]: module "preprocess" returns ok for request 4 modcall[authorize]: module "chap" returns noop for request 4 modcall[authorize]: module "mschap" returns noop for request 4 rlm_realm: No '@' in User-Name = "cjarrett", looking up realm NULL rlm_realm: No such realm "NULL" modcall[authorize]: module "suffix" returns noop for request 4 rlm_eap: EAP packet type response id 4 length 6 rlm_eap: No EAP Start, assuming it's an on-going EAP conversation modcall[authorize]: module "eap" returns updated for request 4 users: Matched entry DEFAULT at line 176 modcall[authorize]: module "files" returns ok for request 4 modcall: leaving group authorize (returns updated) for request 4 rad_check_password: Found Auth-Type EAP auth: type "EAP" Processing the authenticate section of radiusd.conf modcall: entering group authenticate for request 4 rlm_eap: Request found, released from the list rlm_eap: EAP/peap rlm_eap: processing type peap rlm_eap_peap: Authenticate rlm_eap_tls: processing TLS rlm_eap_tls: Received EAP-TLS ACK message rlm_eap_tls: ack handshake is finished eaptls_verify returned 3 eaptls_process returned 3 rlm_eap_peap: EAPTLS_SUCCESS modcall[authenticate]: module "eap" returns handled for request 4 modcall: leaving group authenticate (returns handled) for request 4 Sending Access-Challenge of id 4 to 10.1.22.10 port 2626 EAP-Message = 0x0105002019001703010015182fff1e23fe4e9d74e4dd55b6a10b80d9cb1b6f3e Message-Authenticator = 0x00000000000000000000000000000000 State = 0x890db137000563152da88540de2781e1 Finished request 4 Going to the next request Waking up in 5 seconds... rad_recv: Access-Request packet from host 10.1.22.10:2626, id=5, length=226 Message-Authenticator = 0x7ad74000bf14f349569c0ccfb1540c0d Service-Type = Framed-User User-Name = "cjarrett" Framed-MTU = 1488 State = 0x890db137000563152da88540de2781e1 Called-Station-Id = "00-0F-CB-FC-3E-5F:CJ Test" Calling-Station-Id = "00-0E-35-FF-2A-82" NAS-Identifier = "AP11G" NAS-Port-Type = Wireless-802.11 Connect-Info = "CONNECT 54Mbps 802.11g" EAP-Message = 0x0205002419001703010019125b45ef09a64c9d64c8b7704291bcf4e8b811339b0138b716 NAS-IP-Address = 10.1.22.10 NAS-Port = 2 NAS-Port-Id = "STA port # 2" Processing the authorize section of radiusd.conf modcall: entering group authorize for request 5 modcall[authorize]: module "preprocess" returns ok for request 5 modcall[authorize]: module "chap" returns noop for request 5 modcall[authorize]: module "mschap" returns noop for request 5 rlm_realm: No '@' in User-Name = "cjarrett", looking up realm NULL rlm_realm: No such realm "NULL" modcall[authorize]: module "suffix" returns noop for request 5 rlm_eap: EAP packet type response id 5 length 36 rlm_eap: No EAP Start, assuming it's an on-going EAP conversation modcall[authorize]: module "eap" returns updated for request 5 users: Matched entry DEFAULT at line 176 modcall[authorize]: module "files" returns ok for request 5 modcall: leaving group authorize (returns updated) for request 5 rad_check_password: Found Auth-Type EAP auth: type "EAP" Processing the authenticate section of radiusd.conf modcall: entering group authenticate for request 5 rlm_eap: Request found, released from the list rlm_eap: EAP/peap rlm_eap: processing type peap rlm_eap_peap: Authenticate rlm_eap_tls: processing TLS eaptls_verify returned 7 rlm_eap_tls: Done initial handshake eaptls_process returned 7 rlm_eap_peap: EAPTLS_OK rlm_eap_peap: Session established. Decoding tunneled attributes. rlm_eap_peap: Identity - cjarrett rlm_eap_peap: Tunneled data is valid. PEAP: Got tunneled EAP-Message EAP-Message = 0x0205000d01636a617272657474 PEAP: Got tunneled identity of cjarrett PEAP: Setting default EAP type for tunneled EAP session. PEAP: Setting User-Name to cjarrett PEAP: Sending tunneled request EAP-Message = 0x0205000d01636a617272657474 FreeRADIUS-Proxied-To = 127.0.0.1 User-Name = "cjarrett" Processing the authorize section of radiusd.conf modcall: entering group authorize for request 5 modcall[authorize]: module "preprocess" returns ok for request 5 modcall[authorize]: module "chap" returns noop for request 5 modcall[authorize]: module "mschap" returns noop for request 5 rlm_realm: No '@' in User-Name = "cjarrett", looking up realm NULL rlm_realm: No such realm "NULL" modcall[authorize]: module "suffix" returns noop for request 5 rlm_eap: EAP packet type response id 5 length 13 rlm_eap: No EAP Start, assuming it's an on-going EAP conversation modcall[authorize]: module "eap" returns updated for request 5 modcall[authorize]: module "files" returns notfound for request 5 modcall: leaving group authorize (returns updated) for request 5 rad_check_password: Found Auth-Type EAP auth: type "EAP" Processing the authenticate section of radiusd.conf modcall: entering group authenticate for request 5 rlm_eap: EAP Identity rlm_eap: processing type mschapv2 rlm_eap_mschapv2: Issuing Challenge modcall[authenticate]: module "eap" returns handled for request 5 modcall: leaving group authenticate (returns handled) for request 5 PEAP: Got tunneled reply RADIUS code 11 EAP-Message = 0x010600221a0106001d1058699d07aa7a08377307f1c5ed250f94636a617272657474 Message-Authenticator = 0x00000000000000000000000000000000 State = 0x6a6983e73566293debc28f9785f4ba2c PEAP: Processing from tunneled session code 0x9c06760 11 EAP-Message = 0x010600221a0106001d1058699d07aa7a08377307f1c5ed250f94636a617272657474 Message-Authenticator = 0x00000000000000000000000000000000 State = 0x6a6983e73566293debc28f9785f4ba2c PEAP: Got tunneled Access-Challenge modcall[authenticate]: module "eap" returns handled for request 5 modcall: leaving group authenticate (returns handled) for request 5 Sending Access-Challenge of id 5 to 10.1.22.10 port 2626 EAP-Message = 0x010600391900170301002ef2c5b8b197e6c26f51f804007aeffa9201509b57c8efb035180baa21bb94725c31867049409c85079be2e3428678 Message-Authenticator = 0x00000000000000000000000000000000 State = 0xb9a3bd04514836a4cba31c175e9c77e6 Finished request 5 Going to the next request Waking up in 5 seconds... rad_recv: Access-Request packet from host 10.1.22.10:2626, id=6, length=280 Message-Authenticator = 0xc08fd8e4919b60e5bd7e5470be52c475 Service-Type = Framed-User User-Name = "cjarrett" Framed-MTU = 1488 State = 0xb9a3bd04514836a4cba31c175e9c77e6 Called-Station-Id = "00-0F-CB-FC-3E-5F:CJ Test" Calling-Station-Id = "00-0E-35-FF-2A-82" NAS-Identifier = "AP11G" NAS-Port-Type = Wireless-802.11 Connect-Info = "CONNECT 54Mbps 802.11g" EAP-Message = 0x0206005a1900170301004f9d20dcfecf2d949b98e83b0ef8ed9db381e1102982367126820039e03f3c11fb6d43998ca6a01e65a19e9ea7d823bd743bd8eb1d732d8dae19c82f39c08ad02e9d63fe13d0c25900ac075cdc3ada61 NAS-IP-Address = 10.1.22.10 NAS-Port = 2 NAS-Port-Id = "STA port # 2" Processing the authorize section of radiusd.conf modcall: entering group authorize for request 6 modcall[authorize]: module "preprocess" returns ok for request 6 modcall[authorize]: module "chap" returns noop for request 6 modcall[authorize]: module "mschap" returns noop for request 6 rlm_realm: No '@' in User-Name = "cjarrett", looking up realm NULL rlm_realm: No such realm "NULL" modcall[authorize]: module "suffix" returns noop for request 6 rlm_eap: EAP packet type response id 6 length 90 rlm_eap: No EAP Start, assuming it's an on-going EAP conversation modcall[authorize]: module "eap" returns updated for request 6 users: Matched entry DEFAULT at line 176 modcall[authorize]: module "files" returns ok for request 6 modcall: leaving group authorize (returns updated) for request 6 rad_check_password: Found Auth-Type EAP auth: type "EAP" Processing the authenticate section of radiusd.conf modcall: entering group authenticate for request 6 rlm_eap: Request found, released from the list rlm_eap: EAP/peap rlm_eap: processing type peap rlm_eap_peap: Authenticate rlm_eap_tls: processing TLS eaptls_verify returned 7 rlm_eap_tls: Done initial handshake eaptls_process returned 7 rlm_eap_peap: EAPTLS_OK rlm_eap_peap: Session established. Decoding tunneled attributes. rlm_eap_peap: EAP type mschapv2 rlm_eap_peap: Tunneled data is valid. PEAP: Got tunneled EAP-Message EAP-Message = 0x020600431a0206003e31177b8b92c88cf3358dc9dce769bb3fe80000000000000000c4134ec0576a1f17704daad6e18e3a3b5f08dec2a3b5f1ba00636a617272657474 PEAP: Setting User-Name to cjarrett PEAP: Adding old state with 6a 69 PEAP: Sending tunneled request EAP-Message = 0x020600431a0206003e31177b8b92c88cf3358dc9dce769bb3fe80000000000000000c4134ec0576a1f17704daad6e18e3a3b5f08dec2a3b5f1ba00636a617272657474 FreeRADIUS-Proxied-To = 127.0.0.1 User-Name = "cjarrett" State = 0x6a6983e73566293debc28f9785f4ba2c Processing the authorize section of radiusd.conf modcall: entering group authorize for request 6 modcall[authorize]: module "preprocess" returns ok for request 6 modcall[authorize]: module "chap" returns noop for request 6 modcall[authorize]: module "mschap" returns noop for request 6 rlm_realm: No '@' in User-Name = "cjarrett", looking up realm NULL rlm_realm: No such realm "NULL" modcall[authorize]: module "suffix" returns noop for request 6 rlm_eap: EAP packet type response id 6 length 67 rlm_eap: No EAP Start, assuming it's an on-going EAP conversation modcall[authorize]: module "eap" returns updated for request 6 modcall[authorize]: module "files" returns notfound for request 6 modcall: leaving group authorize (returns updated) for request 6 rad_check_password: Found Auth-Type EAP auth: type "EAP" Processing the authenticate section of radiusd.conf modcall: entering group authenticate for request 6 rlm_eap: Request found, released from the list rlm_eap: EAP/mschapv2 rlm_eap: processing type mschapv2 Processing the authenticate section of radiusd.conf modcall: entering group MS-CHAP for request 6 rlm_mschap: No User-Password configured. Cannot create LM-Password. rlm_mschap: No User-Password configured. Cannot create NT-Password. rlm_mschap: Told to do MS-CHAPv2 for cjarrett with NT-Password rlm_mschap: FAILED: No NT/LM-Password. Cannot perform authentication. rlm_mschap: FAILED: MS-CHAP2-Response is incorrect modcall[authenticate]: module "mschap" returns reject for request 6 modcall: leaving group MS-CHAP (returns reject) for request 6 rlm_eap: Freeing handler modcall[authenticate]: module "eap" returns reject for request 6 modcall: leaving group authenticate (returns reject) for request 6 auth: Failed to validate the user. PEAP: Got tunneled reply RADIUS code 3 MS-CHAP-Error = "\006E=691 R=1" EAP-Message = 0x04060004 Message-Authenticator = 0x00000000000000000000000000000000 PEAP: Processing from tunneled session code 0x9c06198 3 MS-CHAP-Error = "\006E=691 R=1" EAP-Message = 0x04060004 Message-Authenticator = 0x00000000000000000000000000000000 PEAP: Tunneled authentication was rejected. rlm_eap_peap: FAILURE modcall[authenticate]: module "eap" returns handled for request 6 modcall: leaving group authenticate (returns handled) for request 6 Sending Access-Challenge of id 6 to 10.1.22.10 port 2626 EAP-Message = 0x010700261900170301001bf1f9bd115db78bcad8de732871f5282e1a0754b687ddc300965f0f Message-Authenticator = 0x00000000000000000000000000000000 State = 0x56c5dd00772486e492f840877441be62 Finished request 6 Going to the next request Waking up in 5 seconds... rad_recv: Access-Request packet from host 10.1.22.10:2626, id=7, length=228 Message-Authenticator = 0x55ab371942148ebc1eed6c3b87d626de Service-Type = Framed-User User-Name = "cjarrett" Framed-MTU = 1488 State = 0x56c5dd00772486e492f840877441be62 Called-Station-Id = "00-0F-CB-FC-3E-5F:CJ Test" Calling-Station-Id = "00-0E-35-FF-2A-82" NAS-Identifier = "AP11G" NAS-Port-Type = Wireless-802.11 Connect-Info = "CONNECT 54Mbps 802.11g" EAP-Message = 0x020700261900170301001b4fbf51c05fb105bb02792f87fba4e8cd787ff2beafe7d334716e53 NAS-IP-Address = 10.1.22.10 NAS-Port = 2 NAS-Port-Id = "STA port # 2" Processing the authorize section of radiusd.conf modcall: entering group authorize for request 7 modcall[authorize]: module "preprocess" returns ok for request 7 modcall[authorize]: module "chap" returns noop for request 7 modcall[authorize]: module "mschap" returns noop for request 7 rlm_realm: No '@' in User-Name = "cjarrett", looking up realm NULL rlm_realm: No such realm "NULL" modcall[authorize]: module "suffix" returns noop for request 7 rlm_eap: EAP packet type response id 7 length 38 rlm_eap: No EAP Start, assuming it's an on-going EAP conversation modcall[authorize]: module "eap" returns updated for request 7 users: Matched entry DEFAULT at line 176 modcall[authorize]: module "files" returns ok for request 7 modcall: leaving group authorize (returns updated) for request 7 rad_check_password: Found Auth-Type EAP auth: type "EAP" Processing the authenticate section of radiusd.conf modcall: entering group authenticate for request 7 rlm_eap: Request found, released from the list rlm_eap: EAP/peap rlm_eap: processing type peap rlm_eap_peap: Authenticate rlm_eap_tls: processing TLS eaptls_verify returned 7 rlm_eap_tls: Done initial handshake eaptls_process returned 7 rlm_eap_peap: EAPTLS_OK rlm_eap_peap: Session established. Decoding tunneled attributes. rlm_eap_peap: Received EAP-TLV response. rlm_eap_peap: Tunneled data is valid. rlm_eap_peap: Had sent TLV failure. User was rejcted rejected earlier in this session. rlm_eap: Handler failed in EAP/peap rlm_eap: Failed in EAP select modcall[authenticate]: module "eap" returns invalid for request 7 modcall: leaving group authenticate (returns invalid) for request 7 auth: Failed to validate the user. Delaying request 7 for 1 seconds Finished request 7 Going to the next request Waking up in 5 seconds... rad_recv: Access-Request packet from host 10.1.22.10:2626, id=7, length=228 Sending Access-Reject of id 7 to 10.1.22.10 port 2626 EAP-Message = 0x04070004 Message-Authenticator = 0x00000000000000000000000000000000 --- Walking the entire request list --- Waking up in 2 seconds... --- Walking the entire request list --- Cleaning up request 0 ID 0 with timestamp 4676f842 Waking up in 1 seconds... [EMAIL PROTECTED] wrote: > You are forcing Auth-Type PAM and doing EAP. Where is Auth-Type coming > from? One of the DEFAULT entries? Don't set Auth-Type! Let the server > swich to one that's needed. > > Ivan Kalik > Kalik Informatika ISP > > > Dana 18/6/2007, "Cody Jarrett" <[EMAIL PROTECTED]> piše: > >> Sorry, 10.1.22.10 is the ip of my 3com. >> >> rad_recv: Access-Request packet from host 10.1.22.10:2458, id=0, length=185 >> Message-Authenticator = 0xb0ba1aec817dfd6ab3fc3b0e49fb1125 >> Service-Type = Framed-User >> User-Name = "cjarrett" >> Framed-MTU = 1488 >> Called-Station-Id = "00-0F-CB-FC-3E-5F:CJ Test" >> Calling-Station-Id = "00-0E-35-FF-2A-82" >> NAS-Identifier = "AP11G" >> NAS-Port-Type = Wireless-802.11 >> Connect-Info = "CONNECT 54Mbps 802.11g" >> EAP-Message = 0x0200000d01636a617272657474 >> NAS-IP-Address = 10.1.22.10 >> NAS-Port = 2 >> NAS-Port-Id = "STA port # 2" >> Processing the authorize section of radiusd.conf >> modcall: entering group authorize for request 0 >> modcall[authorize]: module "preprocess" returns ok for request 0 >> modcall[authorize]: module "chap" returns noop for request 0 >> modcall[authorize]: module "mschap" returns noop for request 0 >> rlm_realm: No '@' in User-Name = "cjarrett", looking up realm NULL >> rlm_realm: No such realm "NULL" >> modcall[authorize]: module "suffix" returns noop for request 0 >> rlm_eap: EAP packet type response id 0 length 13 >> rlm_eap: No EAP Start, assuming it's an on-going EAP conversation >> modcall[authorize]: module "eap" returns updated for request 0 >> users: Matched entry DEFAULT at line 153 >> users: Matched entry DEFAULT at line 177 >> modcall[authorize]: module "files" returns ok for request 0 >> modcall: leaving group authorize (returns updated) for request 0 >> rad_check_password: Found Auth-Type pam >> auth: type "PAM" >> Processing the authenticate section of radiusd.conf >> modcall: entering group authenticate for request 0 >> rlm_pam: Attribute "User-Password" is required for authentication. >> modcall[authenticate]: module "pam" returns invalid for request 0 >> modcall: leaving group authenticate (returns invalid) for request 0 >> auth: Failed to validate the user. >> Delaying request 0 for 1 seconds >> Finished request 0 >> Going to the next request >> --- Walking the entire request list --- >> Waking up in 1 seconds... >> --- Walking the entire request list --- >> Waking up in 1 seconds... >> --- Walking the entire request list --- >> Sending Access-Reject of id 0 to 10.1.22.10 port 2458 >> Waking up in 4 seconds... >> >> >> >> Kevin Bonner wrote: >>> On Monday 18 June 2007 16:31:37 Cody Jarrett wrote: >>>> I found a few topics on this issue but nothing quite informative enough. >>>> I'm trying to get freeradius auth working with pam and peap. When I test >>>> my config with radtest, I get Access-accept. When I use a windows XP >>>> supplicant with a 3com access point, I get: >>>> >>>> rlm_pam: Attribute "User-Password" is required for authentication. >>>> modcall[authenticate]: module "pam" returns invalid for request 4 >>>> modcall: leaving group authenticate (returns invalid) for request 4 >>>> auth: Failed to validate the user. >>>> >>>> Is the 3com not sending User-Password attributes in the packets, or is >>>> something else wrong? >>> Run FreeRADIUS in debug mode (radiusd -X) to verify. We cannot guess what >>> your NAS/client is sending. >>> >>> -Kevin >>> >>> >>> ------------------------------------------------------------------------ >>> >>> - >>> List info/subscribe/unsubscribe? See >>> http://www.freeradius.org/list/users.html >> - >> List info/subscribe/unsubscribe? See >> http://www.freeradius.org/list/users.html >> >> > > - > List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html > - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html