[EMAIL PROTECTED] wrote: > And the problem is? Your request gets accepted and you do return VLAN > attributes. > > Ivan Kalik > Kalik Informatika ISP > > > Dana 24/6/2007, "emmcosta" <[EMAIL PROTECTED]> piše: > > >> [EMAIL PROTECTED] wrote: >> >>> Hi, >>> >>> >>> >>>> See in attach naslist, clients.conf and radius -xx log. >>>> >>>> >>> you dont have 127.0.0.1 in your clients.conf >>> >>> alan >>> - >>> List info/subscribe/unsubscribe? See >>> http://www.freeradius.org/list/users.html >>> >>> >>> >> I already add 127.0.0.1 im my clients.conf but I continue with the problem. >> >> -- >> /emmc >> >> >> >> > > - > List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html > > I think that I know which is the problem, when I change configuration in my Cisco ap 1100 to this:
.................... dot11 ssid FONTELONGA vlan 2 authentication open eap eap_methods authentication key-management wpa accounting acct_methods interface Dot11Radio0 no ip address no ip route-cache ! encryption vlan 2 mode ciphers tkip ! encryption mode ciphers tkip ! ssid FONTELONGA ........................ The authentication fail, but if I have change to this: ............ dot11 ssid FONTELONGA vlan 2 authentication open eap eap_methods accounting acct_methods .......... interface Dot11Radio0 no ip address no ip route-cache ! encryption mode wep optional ! encryption vlan 2 mode wep mandatory ! ssid FONTELONGA ............ the authentication is sucessefull. Can you help-me, my Cisco Ap 1100 IOS version is 12.3(8)JA2. -- /emmc
- List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html