I modified the users file with:
# DEFAULT Auth-Type = System
# Fall-Through = 1
and
flavio User-Password == "flavio"
Service-Type = Framed-User,
Framed-Protocol = PPP,
Framed-IP-Address = 10.1.1.8,
Framed-IP-Netmask = 255.255.255.0,
Framed-Routing = Broadcast-Listen,
# Framed-Filter-Id = "std.ppp",
Framed-MTU = 1500,
# Framed-Compression = Van-Jacobsen-TCP-IP
But the problem persist .
Do you think that is better to use a new version of freeradius ?
Tx.
2007/6/25, Dennis Skinner <[EMAIL PROTECTED]>:
Kevin Bonner wrote:
> On Monday 25 June 2007 12:45:15 Flavio Silvestrone wrote:
>>> If you are using a recent version of freeradius, you should have the
> ...
>> The version of radius is "freeradius-1.0.1-3".
>
> 1.0.1 is not recent. Use 1.1.6.
>
>> flavio Cleartext-Password := "flavio"
>> Service-Type = Framed-User,
>> Framed-Protocol = PPP,
>> Framed-IP-Address = 10.1.1.8,
>> Framed-IP-Netmask = 255.255.255.0,
>> Framed-Routing = Broadcast-Listen,
>> # Framed-Filter-Id = "std.ppp",
>> Framed-MTU = 1500,
>> # Framed-Compression = Van-Jacobsen-TCP-IP
>
> Since you're using such an old version of freeradius, you cannot use
> Cleartext-Password here as it was available in 1.1.5 (I think) and later
> versions. You can use User-Password, but you should upgrade to a newer
> version.
Probably should also get rid of:
DEFAULT Auth-Type = System
Fall-Through = 1
Futher up in the users file. It doesn't look like you are trying to use
the /etc/passwd file, which I think is what System is for.
In general, never set Auth-Type.
--
Dennis Skinner
Systems Administrator
BlueFrog Internet
http://www.bluefrog.com
-
List info/subscribe/unsubscribe? See
http://www.freeradius.org/list/users.html
-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
