You can ask a hundred times in different ways. Answer will still be the same:
WARNING: Unprintable characters in the password. ? Double-check the shared secret on the server and the NAS! Ivan Kalik Kalik Informatika ISP Dana 11/7/2007, "E A" <[EMAIL PROTECTED]> piše: > > >Hello >I hav one authentificate problem between my Freeradius and NAT(for VOIP) >what means that i have : No authenticate method (Auth-Type) >so here is my debug : radiusd -X > >rad_recv: Access-Request packet from host 192.168.100.238:1912, id=2, >length=684 > User-Name = "192.168.100.180" > User-Password = "\371\323\025[" > NAS-IP-Address = 192.168.100.238 > NAS-Port-Type = Async > Service-Type = Login-User > Called-Station-Id = "907100" > Calling-Station-Id = "4002" > Cisco-AVPair = "xpgk-request-type=number" > Acct-Session-Id = "47306f08-1-b56089b1" > h323-conf-id = "h323-conf-id=02B21F32 1DEB1BAB 26450001 A8045DEC" > Cisco-AVPair = "h323-call-id=02B21F32 1DEB1BAB 26440001 A8045DEC" > h323-gw-id = "h323-gw-id=192.168.100.180" > Cisco-AVPair = "h323-gw-address=192.168.100.180" > Cisco-AVPair = "h323-incoming-local-address=192.168.100.238" > h323-remote-address = "h323-remote-address=194.6.239.4" > Cisco-AVPair = "h323-remote-id=194.6.239.4" > Cisco-AVPair = "xpgk-h323-id=4FXS-045dec" > Cisco-AVPair = "xpgk-src-number-in=4002" > Cisco-AVPair = "xpgk-src-number-out=4002" > Cisco-AVPair = "xpgk-dst-number-in=907100" > Cisco-AVPair = "xpgk-dst-number-out=907100" > h323-setup-time = "h323-setup-time=11:05:05.000 CEST Wed Jul 11 2007" > Cisco-AVPair = "xpgk-route-retries=1" > Processing the authorize section of radiusd.conf >modcall: entering group authorize for request 1 > modcall[authorize]: module "preprocess" returns ok for request 1 > modcall[authorize]: module "chap" returns noop for request 1 > modcall[authorize]: module "mschap" returns noop for request 1 > rlm_realm: No '@' in User-Name = "192.168.100.180", looking up realm NULL > rlm_realm: No such realm "NULL" > modcall[authorize]: module "suffix" returns noop for request 1 > rlm_eap: No EAP-Message, not doing EAP > modcall[authorize]: module "eap" returns noop for request 1 >radius_xlat: '192.168.100.180' >rlm_sql (sql): sql_set_user escaped user --> '192.168.100.180' >radius_xlat: 'SELECT id,UserName,Attribute,Value,op FROM radcheck WHERE >Username = '192.168.100.180' ORDER BY id' >rlm_sql (sql): Reserving sql socket id: 3 >query: SELECT id,UserName,Attribute,Value,op FROM radcheck WHERE Username = >'192.168.100.180' ORDER BY id >radius_xlat: 'SELECT >radgroupcheck.id,radgroupcheck.GroupName,radgroupcheckAttribute,radgroupcheck.Value,radgroupcheck.op > FROM radgroupcheck,usergroup WHERE usergroup.Username = '192.168.100.180' >AND usergroup.GroupName = radgroupcheck.GroupName ORDER BY radgroupcheck.id' >query: SELECT >radgroupcheck.id,radgroupcheck.GroupName,radgroupcheck.Attribute,radgroupcheck.Value,radgroupcheck.op > FROM radgroupcheck,usergroup WHERE usergroup.Username = '192.168.100.180' >AND usergroup.GroupName = radgroupcheck.GroupName ORDER BY radgroupcheck.id >radius_xlat: 'SELECT id,UserName,Attribute,Value,op FROM radreply WHERE >Username = '192.168.100.180' ORDER BY id' >query: SELECT id,UserName,Attribute,Value,op FROM radreply WHERE Username = >'192.168.100.180' ORDER BY id >radius_xlat: 'SELECT >radgroupreply.id,radgroupreply.GroupName,radgroupreplyAttribute,radgroupreply.Value,radgroupreply.op > FROM radgroupreply,usergroup WHERE usergroup.Username = '192.168.100.180' >AND usergroup.GroupName = radgroupreply.GroupName ORDER BY radgroupreply.id' >query: SELECT >radgroupreply.id,radgroupreply.GroupName,radgroupreply.Attribute,radgroupreply.Value,radgroupreply.op > FROM radgroupreply,usergroup WHERE usergroup.Username = '192.168.100.180' >AND usergroup.GroupName = radgroupreply.GroupName ORDER BY radgroupreply.id >rlm_sql (sql): Released sql socket id: 3 >rlm_sql (sql): No matching entry in the database for request from user >[192.168.100.180] > modcall[authorize]: module "sql" returns notfound for request 1 >modcall: leaving group authorize (returns ok) for request 1 >auth: No authenticate method (Auth-Type) configuration found for the request: >Rejecting the user >auth: Failed to validate the user. > WARNING: Unprintable characters in the password. ? Double-check the shared > secret on the server and the NAS! >Delaying request 1 for 1 seconds >Finished request 1 >Going to the next request >--- Walking the entire request list --- >Waking up in 1 seconds... >--- Walking the entire request list --- >Waking up in 1 seconds... >--- Walking the entire request list --- >Sending Access-Reject of id 2 to 192.168.100.238 port 1912 >Waking up in 4 seconds... >--- Walking the entire request list --- >Cleaning up request 1 ID 2 with timestamp 46949d41 >Nothing to do. Sleeping until we see a request. > > >any help? >best regards!!! > > >--------------------------------- > Ne gardez plus qu'une seule adresse mail ! Copiez vos mails vers Yahoo! Mail > - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
