You can try wpa_supplicant's eapol_test. It should support all EAP types that wpa_supplicant supports.
Ivan Kalik Kalik Informatika ISP Dana 20/7/2007, "Govardhana K N" <[EMAIL PROTECTED]> piše: >Ivan, > >Does that mean, EAP-TTLS is supported in FreeRadius Server but not in >FreeRadius Client? > >Does it work if I use some other client which has EAP-TTLS support? > > >Thanks & Regards, >Govardhana K N > > >On 7/20/07, [EMAIL PROTECTED] <[EMAIL PROTECTED]> wrote: >> >> http://www.freeradius.org/radiusd/man/radeapclient.txt >> >> "The EAP-MD5-Password attribute, if present is used to respond to an MD5 >> challenge. >> >> No other EAP types are currently supported." >> >> Ivan Kalik >> Kalik Informatika ISP >> >> >> >> Dana 20/7/2007, "Govardhana K N" <[EMAIL PROTECTED]> pie: >> >> >Hi, >> > >> >I was able to enable EAP-TTLS in eap.conf file. After sending an >> >Access-Request with EAP-Identity response, using "radeapaclient", an >> >Access-Challenge (with EAP-Type = 21) was received from the server. >> >Immediately after receivng the challenge the client is terminating. >> > >> >What configuration should be done so that client (radeapclient) responds >> to >> >the challenge properly? >> > >> > >> > >> > >> > >> >-- >> >With Regards, >> >Govardhana K N >> > >> > >> >> - >> List info/subscribe/unsubscribe? See >> http://www.freeradius.org/list/users.html >> > > > >-- >With Regards, >Govardhana K N > > - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
