rick norman wrote: >> ----- Original Message ----- >> From: [EMAIL PROTECTED] >> To: "FreeRadius users mailing list" <[email protected]> >> Subject: Re: EAP-MD5client"rlm_eap_md5 : Password is required for EAP-MD5 >> Authentication... >> Date: Mon, 06 Aug 2007 00:39:26 +0100 >> >> >> Use cleartext password: >> >> con_d Cleartext-Password:="con_d" >> >> > Okay, I tried Cleartext-Password as well as ==. > Still fails. > > Following is the new complete output from radiusd -X for this session. > Are you using an old version of FreeRADIUS ?
Cleartext password wasn't available in some of the earlier versions. In that case use: con_d User-Password := "con_d" > > -------------------------------------------------------------------------------- > > rad_recv: Access-Request packet from host 127.0.0.1:57360, id=184, length=63 > User-Name = "con_d" > NAS-Identifier = "rick" > Message-Authenticator = 0x5f4c08498fcee5d8497d0a1ec083a4d0 > EAP-Message = 0x0200000a01636f6e5f64 > Processing the authorize section of radiusd.conf > modcall: entering group authorize for request 0 > modcall[authorize]: module "preprocess" returns ok for request 0 > modcall[authorize]: module "chap" returns noop for request 0 > modcall[authorize]: module "mschap" returns noop for request 0 > rlm_realm: No '@' in User-Name = "con_d", looking up realm NULL > rlm_realm: No such realm "NULL" > modcall[authorize]: module "suffix" returns noop for request 0 > rlm_eap: EAP packet type response id 0 length 10 > rlm_eap: No EAP Start, assuming it's an on-going EAP conversation > modcall[authorize]: module "eap" returns updated for request 0 > users: Matched entry con_d at line 138 > modcall[authorize]: module "files" returns ok for request 0 > modcall: leaving group authorize (returns updated) for request 0 > rad_check_password: Found Auth-Type EAP > auth: type "EAP" > Processing the authenticate section of radiusd.conf > modcall: entering group authenticate for request 0 > rlm_eap: EAP Identity > rlm_eap: processing type md5 > rlm_eap_md5: Issuing Challenge > modcall[authenticate]: module "eap" returns handled for request 0 > modcall: leaving group authenticate (returns handled) for request 0 > Sending Access-Challenge of id 184 to 127.0.0.1 port 57360 > EAP-Message = 0x010100160410e18639eeac9b901b1e0bd3444aca06f2 > Message-Authenticator = 0x00000000000000000000000000000000 > State = 0x6b43db4b270e35f227bf224ccd168b04 > Finished request 0 > Going to the next request > --- Walking the entire request list --- > Waking up in 6 seconds... > rad_recv: Access-Request packet from host 127.0.0.1:57360, id=185, length=93 > User-Name = "con_d" > NAS-Identifier = "rick" > State = 0x6b43db4b270e35f227bf224ccd168b04 > Message-Authenticator = 0xca15f35d9c82f222c56e62e34928f6f1 > EAP-Message = 0x02010016041037ab0f881c1fa98e477b0a5ad546b160 > Processing the authorize section of radiusd.conf > modcall: entering group authorize for request 1 > modcall[authorize]: module "preprocess" returns ok for request 1 > modcall[authorize]: module "chap" returns noop for request 1 > modcall[authorize]: module "mschap" returns noop for request 1 > rlm_realm: No '@' in User-Name = "con_d", looking up realm NULL > rlm_realm: No such realm "NULL" > modcall[authorize]: module "suffix" returns noop for request 1 > rlm_eap: EAP packet type response id 1 length 22 > rlm_eap: No EAP Start, assuming it's an on-going EAP conversation > modcall[authorize]: module "eap" returns updated for request 1 > users: Matched entry con_d at line 138 > modcall[authorize]: module "files" returns ok for request 1 > modcall: leaving group authorize (returns updated) for request 1 > rad_check_password: Found Auth-Type EAP > auth: type "EAP" > Processing the authenticate section of radiusd.conf > modcall: entering group authenticate for request 1 > rlm_eap: Request found, released from the list > rlm_eap: EAP/md5 > rlm_eap: processing type md5 > rlm_eap_md5: User-Password is required for EAP-MD5 authentication > rlm_eap: Handler failed in EAP/md5 > rlm_eap: Failed in EAP select > modcall[authenticate]: module "eap" returns invalid for request 1 > modcall: leaving group authenticate (returns invalid) for request 1 > auth: Failed to validate the user. > Delaying request 1 for 1 seconds > Finished request 1 > Going to the next request > Waking up in 6 seconds... > --- Walking the entire request list --- > Cleaning up request 0 ID 184 with timestamp 46b647b8 > Sending Access-Reject of id 185 to 127.0.0.1 port 57360 > EAP-Message = 0x04010004 > Message-Authenticator = 0x00000000000000000000000000000000 > Cleaning up request 1 ID 185 with timestamp 46b647b8 > Nothing to do. Sleeping until we see a request. > > > > > > > > - List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
