Alan,
What I am not clear on is for unknown users you wrote:
DEFAULT User-Name =~ "([0-9a-fA-F]:)5[0-9a-fA-F]", Auth-Type := Accept
... vlan stuff
So for username are you saying I can use any old text string?
Also you instructed to list all known mac addresses first should they be
"listed" in the following way:
00:0e:35:1c:e0:52 User "Cleartext-Password := ..."
Tunnel-Medium-Type = "IEEE-802",
Tunnel-Type = "VLAN",
Tunnel-Private-Group-Id = "157",
Thanks for the help.
Brian
-----Original Message-----
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Alan
DeKok
Sent: Monday, August 27, 2007 8:34 AM
To: FreeRadius users mailing list
Subject: Re: Freeradius, Cisco WLC, Mac address auth.
Brian Ertel wrote:
> a correction of what I am using or syntax to accomplish the
> unknown/known user issue?
It's a correction of the entry for a known user. See the README and
"man rlm_pap" in 1.1.7.
> In other words which syntax takes care of the unknown users and which
> takes care of the known users?
The second part of my response says how to deal with unknown users.
> I am still unclear about how freeradius
> identifies and returns values for unknown users.
What part of my response was unclear? You asked a question, and I
gave an answer immediately following the question...
Alan DeKok.
-
List info/subscribe/unsubscribe? See
http://www.freeradius.org/list/users.html
-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
