well if u are testing freeradius with NTRADPING then this wat i did some
time back
*add the following in user file*
# Framed-MTU = 1500,
# Framed-Compression = Van-Jacobsen-TCP-IP
###############punith added this for testing#########################
*punith Cleartext-Password := "test123"
root Cleartext-Password := "root123"
dam Cleartext-Password := "dam123"
*#####################################################################
#
# This is an entry for a user with a space in their name.
*add the following in radius.conf*
# sql
#########punith added this for testing#########
*etc_group
*###############################################
#
# If you are using /etc/smbpasswd, and are also doing
*add the following in the client file*
# password = someadminpas
}
#client some.host.org {
# secret = testing123
# shortname = localhost
#}
####punith added this for testing###########
*client 172.22.55.222 {
secret = mysec
shortname = punith
}
client 172.22.54.64 {
secret = mysec
shortname = punith
}
client 172.22.55.10 {
secret = mysec
shortname = root
}
client 10.19.1.237 {
secret = mysec
shortname = root
}
*##############end###########################
#
# You can now specify one secret for a network of clients.
Then i used NT radping with the following parameters
radius secret --> mysec
user -->root
password -- > root123
hope this helps u !
I am not sending this to mail list cos i am not sure abt it but i got this
through googling
or use this
radtest punith test123 <radius -ip> 1812 mysec <nas ip>
if no nas then just put 10
*radtest punith test123 <radius -ip> 1812 mysec 10*
regards
-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
