THaNks A Lot Alan,
Now Server is working Fine for the IPv4 Client Request only, But i dont
understand with the same Image(with the same set-up) why the IPv6(client)
Connection is not receiving reply back from the Radius Server...though Server
is authentication properly as similar its doing for the IPv4 connection from
the client.
Server side:
I am not sure whether Radius Server is sending(access-accept is showing on
screen) the packet to IPv6 Client or not..I need to confrim that !!!
Client Side:
After sending the Access-Request packet to server the client is getting time
out and after 3 tries and then its exceeding its time limit and stop requesting
for the IPv6 connection further.
I have stoped time out even aslo...but not worked !
Its not getting response packet from the Radius Server.
Thanks again....
Vikas
Alan DeKok <[EMAIL PROTECTED]> wrote:
Vikas Bagora wrote:
> 1. I am using freeradius-server-2.0.0-pre1
Please use 2.0.0-pre2.
> - "*users*" file is modified in only with this lines :
> vikas User-Password == password
Change that line to:
vikas Cleartext-Password := "password"
Alan DeKok.
-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
---------------------------------
Luggage? GPS? Comic books?
Check out fitting gifts for grads at Yahoo! Search.-
List info/subscribe/unsubscribe? See http://www.freeradius.org/list/users.html
